KBP3005G ~ KBP310G Voltage 50V ~ 1000V 3.0Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free KBP FEATURES Surge overload rating -60amperes peak Ideal for printed circuit board Plastic material has Underwriters Laboratory flammability classification 94V-0 Mounting position: Any G A BE DK K J F L C H REF. A B C D E F Millimeter Min. Max. 14.22 15.24 10.67 11.68 4.57 5.08 16.25 11.68 12.70 0.76 0.86 REF. G H J K L Millimeter Min. Max. 3.0 x 45° 1.15 1.35 12.7 1.52 3.60 4.10 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol KBP 3005G KBP 301G KBP 302G KBP 304G KBP 306G KBP 308G KBP 310G Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA=50°C Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage Drop Per Bridge Element at 3.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage per Element @TA=25℃ Maximum Reverse Current at Rated DC Blocking Voltage per Element @TA=100℃ Typical Thermal Resistance 1 Typical Thermal Resistance 2 Power dissipation Operating and Storage temperature range I(AV) 3.0 A IFSM 60 A VF 1.1 V 10 µA 1 mA RθJA 40 °C/W RθJC 10 °C/W PD 3 W TJ, TSTG -55~150 °C IR Notes： 1. Thermal Resistance Junction to Ambient. 2. Thermal Resistance Junction to case. http://www.SeCoSGmbH.com/ 13-May-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 KBP3005G ~ KBP310G Elektronische Bauelemente Voltage 50V ~ 1000V 3.0Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 13-May-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2