MMDL914 Surface Mount Switching Diode Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free FEATURES . Fast Switching Speed . For General Purpose Switching Application . Surface Mount Package Ideally Suited for SOD-323L 0.091 (2.3) 0.110 (2.8) Automatic Insertion 0.045 (1.15) 0.053 (1.35) 0.010 (0.25) 0.016 (0.40) MECHANICAL DATA . Case: SOD-323L, Molded Plastic . Polarity: See Diagrams Below . Mounting Position : Any . Shipping : 3000 / Tape & Reel 0.063 (1.60) 0.071 (1.80) 0.031 (0.80) 0.043 (1.10) 0.002 (0.05) 0.010 (0.25) Dimensions in inch (mm) 1 2 CATHODE ANODE MAXIMUM RATINGS Rating Reverse Voltage Forward Current Peak Forward Surge Current Symbol Value Unit VR 100 Vdc IF 200 mAdc IFM(surge) 500 mAdc Symbol Max Unit PD 200 mW 1.57 mW/°C RθJA 635 °C/W TJ, Tstg -50 to +150 °C THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR-5 Board,* TA = 25°C Derate above 25°C Thermal Resistance Junction to Ambient Junction and Storage Temperature **FR-4 Minimum Pad DEVICE MARKING MMDL914 = 5D ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR) 100 — Vdc — — 25 5.0 nAdc mAdc OFF CHARACTERISTICS Reverse Breakdown Voltage (IR = 100 mAdc) Reverse Voltage Leakage Current (VR = 20 Vdc) (VR = 75 Vdc) IR Diode Capacitance (VR = 0, f = 1.0 MHz) CT — 4.0 pF Forward Voltage (IF = 10 mAdc) VF — 1.0 Vdc Reverse Recovery Time (IF = IR = 10 mAdc) (Figure 1) trr — 4.0 ns http://www.SeCoSGmbH.com 01-Jun-2007 Rev. B Any changing of specification will not be informed individual Page 1 of 2 MMDL914 Surface Mount Switching Diode Elektronische Bauelemente 820 Ω +10 V 2.0 k tr 0.1 µF 100 µH tp IF IF t trr 10% t 0.1 µF 90% DUT 50 Ω Input Sampling Oscilloscopes 50 Ω Output Pulse Generator IR(REC) = 1.0 mA IR VR Output Pulse (IF = IR = 10 mA; Measured at IR(REC) = 1.0 mA) Input Signal Notes: 1. A 2.0 kΩ variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp » trr Figure 1. Recovery Time Equivalent Test Circuit 10 100 TA = 85°C TA = 125°C 1.0 IR , Reverse Current (µA) IF, Forward Current (mA) (mA) TA = 150°C 10 TA = – 40°C 1.0 TA = 25°C TA = 85°C 0.1 TA = 55°C 0.01 TA = 25°C 0.001 0.1 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) 1.0 10 0 1.2 Figure 2. Forward Voltage 20 30 VR, Reverse Voltage (V) 40 50 Figure 3. Leakage Current CD, Diode Capacitance (pF) 0.68 0.64 0.60 0.56 0.52 0 2 4 6 8 VR, Reverse Voltage (V) Figure 4. Capacitance http://www.SeCoSGmbH.com 01-Jun-2007 Rev. B Any changing of specification will not be informed individual Page 2 of 2