SM1020D1 THRU SM10100D1 VOLTAGE 20V ~ 100V Elektronische Bauelemente 10.0 AMP Surface Mount Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free D-Pack 0.2 6.6 2.3 0.2 0.1 5.3 FEATURES 0.5 . Low forward voltage drop . High current capability . High reliability . High surge current capability . Epitaxial construction 0.1 0.1 MECHANICAL DATA 0.7 0.1 0.3 0.1 . Case: Molded plastic . Epoxy: UL 94V-0 rate flame retardant . Metallurgically bonded construction . Polarity: Color band denotes cathode end . Mounting position: Any . Weight: 0.70 grams 3 0.6 2.5 0.8 1.0 2 1 0.3 0.2 5.6 0.2 7.0 0.2 2 1.2 0.3 0.1 1.5Max 2.3 PIN 1 PIN 2 CASE PIN 3 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS O Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SM1020D1 TYPE NUMBER Maximum Recurrent Peak Reverse Voltage 20 Working Peak Reverse Voltage 20 Maximum DC Blocking Voltage 20 Maximum Average Forward Rectified Current, See Fig. 1 Peak Forward Surge Current, 8.3 mS single half Sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage At 5.0A per leg. Maximum DC Reverse Current Ta=25 C At Rated DC Blocking Voltage Ta=100 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance R JC Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. O O 0-1RY-200 Rev. & SM1040D1 SM1060D1 SM10100D1 40 40 40 60 60 60 100 100 100 UNITS V V V 0.55 0.65 0.83 V 0.3 45 0.15 22.5 0.05 7.5 mA 10. 250 10 -50 ~ +150 -65 ~ +175 pF /W к к Page 1 of 2 SM1020D1 THRU SM10100D1 VOLTAGE 20V ~ 100V Elektronische Bauelemente 10.0 AMP Surface Mount Schottky Barrier Rectifiers ƔRATING AND CHARACTERISTIC CURVES (SM1020D1 THRU SM10100D1) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL FORWARD 2 0 0 20 40 60 80 100 120 140 160 180 200 CASE TEMPERATURE,( C) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 D1 ~S M1 10 60 D1 5.0 10 0D 1 SM 10 0D1 D1 100 6 M10 4 10 SM 10 1~S 0 SM1 20D 6 SM 8 INSTANTANEOUS FORWARD CURRENT,(A) 04 0D 1 50 10 10 SM AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 12 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle 0.1 PEAK FORWARD SURGE CURRENT,(A) 250 .01 200 .1 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) 150 8.3ms Single Half Tj=25 C Sine Wave SM 102 100 0D1 ~ SM 104 JEDEC method 0D1 SM 106 50 0D1 ~SM 101 FIG.5 - TYPICAL REVERSE 00D 1 CHARACTERISTICS 0 1 5 50 10 100 100 NUMBER OF CYCLES AT 60Hz REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 2800 2400 2000 1600 SM 102 0D 1~S M 1200 SM1 0 104 0D 1 6 0 D1 800 10 Tj=75 C 1.0 O Tj=25 C .1 SM10 100D 1 400 0 .01 .05 .1 .5 1 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com/ 06-Nov-2009 Rev. C 5 10 50 100 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) Any changing of specification will not be informed individual Page 2 of 2