SM5150B Voltage 150V 5.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free SMB FEATURES High Current Capability Extremely Low Thermal Resistance For Surface Mount Application Higher Temp Soldering : 250°C for 10 Seconds at Terminals Low Revise Current B MECHANICAL DATA A Case: Molded Plastic Epoxy: UL 94V-0 Rate Flame Retardant Lead: Axial Leads, Solderable per MIL-STD-202 method 208 Guaranteed Polarity: Color Band Denotes Cathode End Mounting Position: Any C H D G E F PACKAGE INFORMATION Package MPQ Leader Size SMB 3K 13 inch REF. A B C D Millimeter Min. Max. 1.91 2.20 4.06 4.70 3.30 3.94 2.13 2.44 REF. E F G H Millimeter Min. Max. 0.203 5.08 5.59 0.76 1.52 0.15 0.305 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Symbol Rating Unit Peak Repetitive Peak reverse voltage VRRM 150 V Working Peak Reverse Voltage VRWM 150 V Maximum DC Blocking Voltage VR 150 V IF(AV) 5 A IFSM 150 A Average Forward Current @TJ=25°C Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFM=5.0A, TA=25°C Maximum Instantaneous Forward Voltage I =5.0A, T =75°C FM A 0.83 VF IFM=5.0A, TA=125°C Maximum DC Reverse Current at Rated DC 3 Blocking Voltage Typical Junction Capacitance 1 Typical Thermal Resistance 2 Voltage Rate of Chance (Rated VR) Operating & Storage Temperature TJ=25°C TJ=100°C 0.73 V 0.65 IR 50 800 μA CJ 350 pF RθJC 15 °C / W dv / dt 1000 V / μs TJ ,TSTG -50~150, -65~175 °C Notes: 1. Measured at 1MHz and applied reverse voltage of 5.0 V D.C. 2. Thermal Resistance Junction to Case. 3. Pulse Test：Pulse Width≦300μs, Duty Cycle≦2.0%. http://www.SeCoSGmbH.com/ 01-Mar-2012 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 SM5150B Elektronische Bauelemente Voltage 150V 5.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-Mar-2012 Rev. B Any changes of specification will not be informed individually. Page 2 of 2