SP10100 VOLTAGE 100 V 10.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen free ITO-220 10 0.5 0.2 0.1 3.2 4.5 0.2 2.9 0.3 0.3 1.3 15 0.2 3.7 13Min Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction 2.7 0.2 0.2 FEATURES MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 1.98 grams (approximate) 2.54 0.2 0.2 0.7 2.54 0.5 2.6 0.2 0.2 0.2 PIN 1 PIN 3 CASE PIN 2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Per Leg Per Device Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous IF = 5 A, TA = 25°C, per leg Forward Voltage IF = 5 A, TA = 125°C, per leg Maximum DC Reverse Current TA=25°C at Rated DC Blocking Voltage (Note 3) TA=100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG SYMBOL SP10100 UNITS VRRM VRSM VDC 100 100 100 5 10 V V V 130 A 0.82 0.70 0.05 10 350 4.0 10000 -50 ~ +150 -65 ~ +175 V IF IFSM VF IR CJ RJC dv / dt TJ TSTG A mA pF °C /W V / s °C °C NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. 3. Pulse Test:Pulse Width = 300 s, Duty Cycle ≦ 2.0%. http://www.SeCoSGmbH.com/ 13-Sep-2010 Rev. E Any changes of specification will not be informed individually. Page 1 of 2 SP10100 Elektronische Bauelemente VOLTAGE 100 V 10.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (SP10100) http://www.SeCoSGmbH.com/ 13-Sep-2010 Rev. E Any changes of specification will not be informed individually. Page 2 of 2