2N5662 2N5663 MECHANICAL DATA Dimensions in mm (inches) NPN BIPOLAR POWER SWITCHING TRANSISTORS 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 38.00 (1.5) min. 0.89 max. (0.035) FEATURES 0.41 (0.016) 0.53 (0.021) dia. • FAST SWITCHING • CECC SCREENING OPTIONS 5.08 (0.200) typ. • SPACE QUALITY LEVELS OPTIONS 2.54 (0.100) 2 1 3 • JAN LEVEL SCREENING OPTIONS 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) APPLICATIONS 45° • HIGH SPEED SWITCHING CIRCUITS TO-5 (TO-205AA) • POWER AMPLIFIERS Underside View 1 = Emitter 2 = Base 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tc = 25°C unless otherwise stated) VCBO VCEO VEBO IB IC PD PD RθJC RθJA TJ , TSTG Collector – Base Voltage Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Base Current Collector Current Power Dissipation @ TC = 25°C Power Dissipation @ TA = 25°C Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Operating and Storage Junction Temperature Range 2N5662 250V 200V 2N5663 400V 300V 6V 0.5A 2.0A 35W 26W 2.0W 1.0W 5.0°C/W 6.67°C/W 87.5°C/W 175.4°C/W –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5384 Issue 1 2N5662 2N5663 ELECTRICAL CHARACTERISTICS - 2N5666 (TA = 25°C unless otherwise stated) Parameter V(BR)CEO* V(BR)EBO ICES Test Conditions Collector – Emitter 2N5662 Breakdown Voltage 2N5663 Emitter – Base Breakdown Voltage IC = 10mA 300 IE = 10µA 6.0 0.2 µA 0.1 µA VCB = 250V 2 VCB = 400V 1.0 mA IC = 1.0A IB = 0.1A 0.4 IC = 2.0A IB = 0.4A 0.8 IC = 1.0A IB = 0.1A 1.2 IC = 2.0A IB = 0.4A 1.5 2N5662 IC = 50mA VCE = 2V 40 2N5663 IC = 50mA VCE = 2V 25 2N5662 IC = 0.5A VCE = 5V 40 120 2N5663 IC = 0.5A VCE = 5V 25 75 Both IC = 1.0A VCE = 5V 15 Both IC = 2.0A VCE = 5V 5.0 VCB = 10V IE = 0A Collector – Base Cut-off Current VCE(sat)* Collector – Emitter Saturation Voltage Base – Emitter On Voltage Cobo Output Capacitance [hfe] Small Signal Current Gain ton Turn on time toff Turn off time V 2 Collector – Emitter Cut-off Current (IB = 0) DC Current Gain Max. Unit 2 ICBO hFE* Typ. 200 1 VCE = 200V 1 VBE(sat)* Min. VCB = 200V 1 VCE = 300V VCB = 300V 100kHz < f < 1MHz f = 10MHz 2N5662 2N5663 IC = 0.1A VCE = 5V IB11 = 15mA IB12 = 25mA IC = 0.5A VCC = 100V IB11 = -IB2 = 15mA IB1 2 = -I B2 = IC = 0.5A 25mA 2.0 V — 45 pF 7.0 — 0.25 0.85 µs 1.2 VCC = 100V NOTES * Pulse Test: tp = 300µs, δ ≤ 2% 1) Value for the 2N5662 2) Value for the 2N5663 Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5384 Issue 1