SHD218513 SHD218513A SHD218513B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 747, REV. - HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 600 Volt, 0.60 Ohm, 11A MOSFET • Isolated Hermetic Metal Package • Fast Switching • Low RDS (on) • Electrically Equivalent to IRFPC50 MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C THERMAL RESISTANCE, JUNCTION TO CASE SYMBOL VGS ID IDM TJ/TSTG PD RθJC MIN. -55 - TYP. - MAX. ±20 11 44 +150 430 0.29 UNITS Volts Amps Amps °C Watts °C/W BVDSS 600 - - Volts RDS(ON) VGS(th) 2.0 - 0.60 4.0 Ω Volts S(1/Ω) gfs 5.7 - - IDSS - - 100 μA IDSS - - 500 μA IGSS - - nA td(ON) tr td(OFF) tf VSD - - 18 37 88 36 - 100 -100 - trr - 550 ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0 mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 6.0A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250μA FORWARD TRANSCONDUCTANCE VDS = 100V, IDS = 6.0A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. rating, VGS = 0V TJ = 25°C ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8 x Max. rating, VGS = 0V TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 300V, RISE TIME ID = 11A, TURN OFF DELAY TIME RG = 6.2Ω FALL TIME DIODE FORWARD VOLTAGE TC = 25°C, IS = 11A, VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IF = 11A, di/dt = 100A/μsec INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz nsec 1.4 Volts 830 nsec Ciss Coss Crss - 2700 300 61 - • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • pF SHD218513 SHD218513A SHD218513B SENSITRON DATA SHEET 747, REVISION - MECHANICAL DIMENSIONS: in Inches / mm .370±.010 (9.40±.254) .510±.020 (12.9±.508) .520±.020 (13.2±.508) .370±.010 (9.40±.254) .125±.010 (3.17±.254) .030±.010 (.762±.254) 2 .370±.010 (9.40±.254) .090±.010 (2.29±.254) 2 .610±.010 (15.5 ±.254) 2 .030±.010 (.762±.254) .030±.010 (.762±.254) 3 .320±.010 (8.13±.254) .610±.010 (15.5±.254) 3 .110 (2.80) Max .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) 3 Alumina Ring Terminal 1 SHD-5 .110 (2.79) Max Moly Lid .020±.005 R (.508±.127 ) Copper Terminals Alumina Ring .130 (3.30) Max Moly Base Terminal 1 .020±.002 (.508±.051) .060±.010 (1.52±.254) Moly Lid Alumina Ring Moly Base Terminal 1 SHD-5A .020±.005 R (.508±.127 ) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-5B PINOUT TABLE DEVICE TYPE MOSFET, SURFACE MOUNT SHD-5, 5A, 5B PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •