Bulkhead Feed-Thrus 231-104-09 Jam Nut Mount Environmental Plug/Receptacle Bulkhead Feed-Thru for MIL-DTL-38999 Series I Type Connector Series 231 - D38999 Series I Type Connector Type 104 - Env. Bulkhead Feed-Thru Shell Size 09 11 13 15 17 19 21 23 25 Insert Arrangement Per MIL-DTL-38999 Series I MIL-STD-1560 Contact Termination P - Pin on Plug Side S - Socket on Plug Side 231 - 104 - 09 M 11 - 35 P N - 01 Shell Style 09 - Jam Nut Mount Plug/ Receptacle Gender Changer Alternate Key Position A, B, C, D (N = Normal) Connector Material and Finish M - Aluminum / Electroless Nickel NC - Aluminum / Zinc-Cobalt NF - Cad / O.D. Over Electroless Nickel (1000hr Salt Spray) ZN - Aluminum Zinc-Nickel Olive Drab MT - Aluminum / Ni-PTFE 1000 Hour GreyTM AL - Aluminum / Pure Electrodeposited Aluminum Panel Accomodation Panel Accomodation 01 - .0625″ (Min) .125″ (Max) 02 - .0625″ (Min) .250″ (Max) 03 - .0625″ (Min) .500″ (Max) Insert Arrangement per MIL-DTL-38999, Series l MIL-STD-1560 TABLE I: CONNECTOR DIMENSIONS SHELL SIZE 1. G +.000-.005 (0-0.1) .875(22.2) 1.062(27.0) .703(17.9) .699(17.8) .701(17.8) 1.030(26.2) 1.000(25.4) 1.250(31.8) .827(21.0) .769(19.5) .851(21.6) 1.205(30.6) 1.188(30.2) 1.375(34.9) 1.015(25.8) .955(24.3) B DIA MAX C MAX 09 .688-24 UNEF .573(14.6) .900(22.9) 11 0.813-20 UNEF 13 1.000-20 UNEF 15 1.125-18 UNEF .976(24.8) 1.325(33.7) 1.312(33.3) 1.500(38.1) 1.140(29.0) 1.084(27.5) 17 1.250-18 UNEF 1.101(28.0) 1.450(36.8) 1.438(36.5) 1.625(41.3) 1.265(32.1) 1.208(30.7) 19 1.375-18 UNEF 1.208(30.7) 1.565(39.8) 1.562(39.7) 1.812(46.0) 1.390(35.3) 1.333(33.9) 21 1.500-18 UNEF 1.333(33.9) 1.690(42.9) 1.688(42.9) 1.938(49.2) 1.515(38.5) 1.459(37.1) 23 1.625-18 UNEF 1.458(37.0) 1.795(45.6) 1.812(46.0) 2.062(52.4) 1.640(41.7) 1.580(40.1) 25 1.750-18 UNS 1.583(40.2) 1.920(48.8) 2.000(50.8) 2.188(55.6) 1.765(44.8) 1.709(43.4) D HEX E FLATS APPLICATION NOTES Material/finish: Shell assembly, coupling nut, jam nut, lock ring—Aluminum Alloy, See Table II Contacts—Copper alloy/gold plate Bayonet pins, wave washer—CRES/passivate © 2008 Glenair, Inc. F DIA ±.005(0.1) A THREAD CLASS 2A O-Ring, interfacial and peripheral seals—silicone/N.A. Insulators—High grade rigid dielectric/N/A. Ground Ring—Beryllium copper/gold plate 2. Metric Dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-5 E-Mail: [email protected] E