130MHz SAW Filter 5.1MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13012 www. sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 129.85 130 130.15 Insertion Loss dB - 23.3 26 3dB Bandwidth MHz 5.05 5.08 - 30dB Bandwidth MHz - 5.77 5.8 45dB Bandwidth MHz 5.92 6.2 50dB Bandwidth MHz 5.98 6.8 Passband Variation dB - 0.8 1.2 Absolute Delay usec - 3.91 4.5 Ultimate Rejection(f0±7.5MHz) dB 50 56 - Material Temperature coefficient KHz/°C -2.34 Substrate Material - 112°LT Ambient Temperature °C 25 Operating Temperature Range °C -25 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A DIP3512 (35*12.6*5.2mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 +86-23-62808818 Phone:Tel: +86-23-62920684 Part Number LBT13012 Rev. Date 2011-12-12 Ver. 1.0 Fax: +86-23-62808382 Fax: +86-23-62805284 Page 1/3 www.sipatsaw.com / [email protected] www.sipatsaw.com / [email protected] 130MHz SAW Filter 5.1MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13012 www. sipatsaw.com Matching Configuration 手动测试座 L1=27nH C1=36 pF L2=27nH C2=36pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBT13012 XXYYZZ 1 Output 5 Ground All Others 4.70 0.50 4.50 0.50 0.45 0.05 Input Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT13012: Part Number 3)XXYY: Date Code 4) ZZ: Identified Code 2.54 0.20 2.54 0.20 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 +86-23-62808818 Phone:Tel: +86-23-62920684 5 6 1 Package: DIP3512 7.62 0.50 4 3 2 25.40 0.50 Part Number LBT13012 Rev. Date 2011-12-12 Ver. 1.0 Fax: +86-23-62808382 Fax: +86-23-62805284 Page 2/3 www.sipatsaw.com / [email protected] www.sipatsaw.com / [email protected] 130MHz SAW Filter 5.1MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT13012 www. sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance -13.2615 -20.7615 -23.2615 -21.2615 -33.2615 -21.7615 -43.2615 -22.2615 Amplitude ripple(dB) Magnitude(dB) Type Performance -53.2615 -63.2615 -73.2615 -22.7615 -23.2615 -23.7615 -83.2615 -24.2615 -93.2615 -24.7615 -103.2615 -25.2615 -25.7615 -113.2615 115 120 125 130 135 Frequency(MHz) Horizontal: 5MHz/Div 140 145 Vertical: 10dB/Div 126 127 128 129 130 131 Frequency(MHz) Horizontal: 1MHz/Div Group Delay Variation 132 133 134 Vertical: 0.5dB/Div Phase Linearity Type Performance Type Performance 15 4600 4400 X: 130 Y: 3927 4000 X: 132.6 Y: 3890 X: 127.4 Y: 3767 Degree(deg) Group Delay Time(ns) 10 4200 3800 3600 5 X: 132.6 Y: 4.212 X: 130 Y: -1.819 0 3400 -5 3200 X: 127.4 Y: -8.567 3000 130 131 Frequency(MHz) Horizontal: 1MHz/Div 132 128 133 Vertical: 200ns/Div 129 130 131 Frequency(MHz) Horizontal: 1MHz/Div Smith Chart S11 +j2.0 +j0.5 -j0.2 +j2.0 +j0.2 ∞ 0.0 +j5.0 0.5 5.0 2.0 1.0 0.5 0.2 +j5.0 0.2 +j0.2 -j0.2 -j5.0 ∞ -j5.0 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 +86-23-62808818 Phone:Tel: +86-23-62920684 Vertical: 5deg/Div +j1.0 +j0.5 -j0.5 133 Smith Chart S22 +j1.0 0.0 132 5.0 129 2.0 128 1.0 127 Part Number LBT13012 Rev. Date 2011-12-12 Ver. 1.0 Fax: +86-23-62808382 Fax: +86-23-62805284 Page 3/3 www.sipatsaw.com / [email protected] www.sipatsaw.com / [email protected]