875MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT87503 www.sipatsaw.com Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz - 875 - Insertion Loss(f0±6MHz) dB - 1.7 2.5 1dB Bandwidth MHz 12 21.55 - Passband Variation(f0±6MHz) dB - 0.5 1 10～800MHz dB 25 37 - 800～850MHz dB 30 32 - 900～1119MHz dB 35 39 - 1119～2600MHz dB 20 33 - Ultimate Rejection Material Temperature coefficient KHz/°C -28 Substrate Material - 42LT Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A SMD3.0*3.0 Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBT87503 Rev. Date 2010-07-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 875MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT87503 www.sipatsaw.com Matching Configuration Source/Load Impedance=50 ohm OUTPUT 50Ω INPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 3.00±0.10 H75C XXYY 5 3 Input: 3.00±0.10 2 Pad Configuration: 6 1 Output: 5 Ground: All Others 1.25±0.17 4 Marking Configuration: 1.15±0.12 1) •: Pad Number 1 Index 2) H75C: Part Number 6 1 5 2 4 3 1.30 3) XXYY: Date(Year/month) 0.60 1.60 1.50 0.85 Package: SMD3.0*3.0 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 Part Number LBT87503 Rev. Date 2010-07-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 875MHz SAW Filter 12MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBT87503 www.sipatsaw.com Typical Performance Frequency Response Passband Response Type Performance Type Performance 8.9358 0.4358 -1.0642 -0.0642 -11.0642 -0.5642 -1.0642 A m plitude ripple(dB ) -31.0642 -41.0642 -51.0642 -1.5642 -2.0642 -61.0642 -2.5642 -71.0642 -3.0642 -81.0642 -91.0642 780 800 820 840 860 880 900 Frequency(MHz) Horizontal: 20MHz/Div 920 940 840 960 Vertical: 10dB/Div 850 860 870 Frequency(MHz) 880 Horizontal: 10MHz/Div Group Delay Variation(f0±6MHz) 890 900 Vertical: 0.5dB/Div Phase Linearity(f0±6MHz) Type Performance Type Performance 120 25 100 20 80 15 10 60 40 X: 881 Y: 38.81 X: 875 Y: 35.36 X: 869 Y: 30.57 5 Degree(deg) G roup Delay T im e(ns ) 20 0 X: 869 Y: -2.668 X: 875 Y: 0.7829 X: 881 Y: -2.258 -5 0 -10 -15 -20 -20 -40 -25 875 Frequency(MHz) 880 Horizontal: 5MHz/Div 885 865 Vertical: 20ns/Div 870 875 Frequency(MHz) Horizontal: 5MHz/Div Smith Chart S11 +j0.5 +j2.0 -j0.2 -j5.0 -j0.5 5.0 0.0 ∞ +j5.0 0.5 5.0 2.0 1.0 -j0.2 +j2.0 +j0.2 +j5.0 0.2 +j0.2 0.5 Vertical: 5deg/Div +j1.0 +j0.5 ∞ -j5.0 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 885 Smith Chart S22 +j1.0 0.0 880 2.0 870 1.0 -60 865 0.2 Magnitude(dB) -21.0642 Part Number LBT87503 Rev. Date 2010-07-05 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3