2.5 Gbps PIN-TIA Receiver Modules-ROSA (3.3 V) T-11-2500A-D3-SSC • T-11-2500A-D3-SLC Features • InGaAs/ InP PIN Photodiode with transimpedance amplifier • High sensitivity with Auto Gain Control (AGC) • Differential ended output • Single +3.3 V operation • -40 to +85ºC operating temperature Packaging • SC/ LC ROSA package Application • 2.5 Gbps SONET/ SDH receivers • 2.5 Gbps ATM receiver Absolute Maximum Ratings (Tc = 25˚C) Parameter Symbol Value Supply Voltage Vcc 4.5 Operating Temperature Topr -40 to +85 Storage Temperature Tstg -40 to +85 AC Optical and Electrical Characteristics (Tc = 25˚C) Parameter Min. Symbol Detection Range 1100 Gain @ 10 MBps G Differential Bandwidth 1600 BW (to –3dB point) Saturation Power -3 Psat Sensitivity Sens Output Resistance 48 Rout Unit V ˚C ˚C Package ROSA ROSA Fiber - Typ Max 3.3 3.6 0.6 34 - Typ 1310 Max 1650 Unit nm Test Condition - 27 - V/mW λ = 1310 nm 1800 2000 MHz - 0 -21 60 -18 72 dBm dBm ohm λ = 1310 nm BER = 10-9 @ 2.5 Gbps - Operating at Vcc = 3.3 V, Tc = 25 ºC, λ = 1310 nm, 9/125 µm SM fiber Connector Options Model T-11-2500A-D3-SSC T-11-2500A-D3-SLC DC Electrical Characteristics (Tc = 25˚C) Parameter Symbol Min Power Supply Vcc 3 Differential Output Voltage Vd Supply Current (no load) Icc - Connector SC LC Unit V V mA 2.5 Gbps PIN-TIA Receiver Modules-ROSA (3.3 V) T-11-2500A-D3-SSC • T-11-2500A-D3-SLC Pin Assignments VCC (+3.3V) DOUT PD DOUT Pin assignment 1~Vcc 2~Dout 3~Dout 4~GND (case) *Units in mm GND Functional Schematic Outline Drawing Model PIN Assignment T-11-2500A-D3-SSC T-11-2500A-D3-SLC 1 Note: Pin assignment can be customized. Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Luminent’s sole and absolute discretion. Luminent warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © Luminent, Inc. 2002 All rights reserved 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENTINC.COM LUMNDS064-0402