SDR600 Thru SDR608 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 15 A, 45-60 nsec, 50-800 V Ultra Fast Rectifier Part Number/Ordering Information 1/ SDR __ __ │ │ └ Screening 3/ │ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Voltage 600 = 50V 601 = 100V 602 = 200V 603 = 300V 604 = 400V 605 = 500 V 606 = 600V 607 = 700V 608 = 800V Features: • • • • • • • • • • Maximum Ratings 2/ Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA= 25°C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA= 25°C) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) SDR600 SDR601 SDR602 SDR603 SDR604 SDR605 SDR606 SDR607 SDR608 Ultra Fast Recovery: 45-60 nsec Maximum Low Reverse Leakage Current Single Chip Construction PIV to 800 Volts Hermetically Sealed High Surge Rating Low Thermal Resistance Also available in 2 Pin TO-59 or TO-111 Isolated Package upon request TX, TXV, and Space Level Screening Available Symbol Value Units VRRM VRWM VR 50 100 200 300 400 500 600 700 800 Volts IO 15 Amps IFSM 180 Amps TOP & TSTG -65 to +175 ºC RθJC 2.5 ºC/W DO-4: Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @ 25ºC. 3/ Screened to MIL-PRF-19500. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0019C DOC SDR600 Thru SDR608 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Symbol Value Units Instantaneous Forward Voltage Drop (IF= 15 Adc, TA= 25ºC, 300 μs Pulse) SDR600-605 SDR606-608 VF 1.3 1.8 VDC Instantaneous Forward Voltage Drop (IF= 15 Adc, T = -55 ºC, 300 μs Pulse) SDR600-605 SDR606-608 VF 1.45 1.95 VDC Reverse Leakage Current (Rated VR, TA= 25ºC, 300 µs minimum pulse) IR 50 µA Reverse Leakage Current (Rated VR, TA= 100ºC, 300 µs minimum pulse) IR 10 mA CJ 150 pF tRR 45 50 60 nsec Junction Capacitance (VR= 10 VDC, TA= 25ºC, f= 1 MHz) Reverse Recovery Time (IF= 500 mA, IR= 1 A, IRR= 250 mA, TA= 25ºC) SDR600-605 SDR606 SDR607-608 Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless otherwise specified, all Maximum Ratings/Electrical Characteristics @ 25ºC. Case Outline: DO-4 Stud: Cathode Lead: Anode NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0019C DOC