SHANGHAI SUNRISE ELECTRONICS CO., LTD. DF005 THRU DF10 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 1.0A DF FEATURES • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating: 50 A peak • High temperature soldering guaranteed: 250oC/10sec/ at terminals MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC (Ta=40oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at forward current 1.0A) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) o Ta=125 C DF 005 50 35 50 DF 01 100 70 100 DF 02 200 140 200 DF 04 400 280 400 DF 06 600 420 600 DF 08 800 560 800 DF UNITS 10 1000 V 700 V 1000 V IF(AV) 1.0 A IFSM 50 A VF 1.1 V 10.0 µA 500 µA IR 25 CJ Typical Junction capacitance (Note 1) 40 Typical Thermal Resistance (Note 2) Rθ(Ja) -55 to +150 Storage and Operating Junction Temperature TSTG,TJ Note: 1. Measured at 1.0 MHz and applied voltage of 4.0 Vdc 2. Thermal Resistance from junction to Ambient mounted on P.C. Board with 13×13mm copper pads. pF o C/W o C http://www.sse-diode.com