INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH FEATURES: ► Exceptionally Low Phase Noise ► Interactive Communication ► Standard Programming Interface ► Ultra Wide Tuning Range ► Lead Free - RoHS Compliant ► Patent Pending REL-PRO® Technology ► Small Size, Surface Mount ► Buffered Output Phase Noise -80 -90 Phase Noise (dBc/Hz) -100 -110 -120 -130 -140 -150 -160 -170 100 1000 10000 100000 1000000 10000000 Offset Frequency (Hz) 500.000 MHz / 11.1 dBm 850.000 MHz / 10.1 dBm 1200.00 MHz / 9.31 dBm SPECIFICATIONS (Rev. B 05/25/07) Frequency Step Size Reference Input Frequency Reference Input Voltage Bias Voltage Output Power Spurious Suppression Harmonic Suppression Settling Time Output Impedance Typical Phase Noise 500 - 1200 MHz 500 kHz Package # 197LF 10 MHz * 1.0 V p-p to 3.3 V p-p Vcc Digital VCO Converter V (Vdc) +5 +5 +5 I (mA Max.) 50 40 60 +7 dBm (Min.) 85 dB (Typ.) 10 dB (Typ.) 15 mSec (Max.) ** 50 Ohms (Nom.) Offset @ 1 kHz @ 10 kHz @ 100 kHz Phase Noise -95 dbc/Hz -95 dbc/Hz -118 dbc/Hz Operating -40 to +85 °C Temperature Range Programming See Application Note: AN7100 * Reference input frequency is programmable in multiples of the step size, 10 MHz is the default setting. 150 MHz (Max.) ** From the rising edge of LE to stable lock detect Absolute Maximum Ratings Storage Temp. Range -55 to +125 ºC Bias Voltage (Digital) +5.25 V Bias Voltage (VCO) +5.5 V Bias Voltage (Converter) +8 V DC Voltage Applied to RF Out ±25 V Pin 5 - RF out Pin 7 - Lock Detect Out * Pin 9 - Data In Pin 10 - Error Flag Pin 11 - Clock In Pin 13 - VCO (On/Off)**** Pin 16 - Reset ** Pin-Out Pin 19 - Latch Enable In Pin 21 - Ref. In Pin 23 - Vcc (Digital) Pin 24 - Vtune (Output) Pin 25 - Vcc (VCO) Pin 26 - Vout (Converter) *** Pin 27 - Vcc (Tune) *** Pin 28 - Vcc (Converter) Pin 8,12,14,15,17 - NC All Others - Ground NC - No Connection * High when locked (source/sink 500 uA) ** A low on this input will reset the internal controller. Leave unconnected for normal operation. *** Connect externally. Bypassed with a 10uF 35V tantalum capacitor. **** NC if unused. INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH HARMONIC SUPPRESSION RBW 3 MHz Ref 15 dBm 30 dB SWT 15 ms 2 3 0 -10 Marker 1 [T1 ] 10.17 dBm 498.798076923 MHz Delta 2 [T1 ] -9.32 1.002403846 Delta 3 [T1 ] -10.34 501.201923077 4 Delta 4 [T1 ] -20.16 1.503605769 dB GHz A dB MHz dB GHz -20 -30 -40 -50 -60 -70 -80 Center 1.375 GHz Date: 21.MAY.2007 225 MHz/ REFERENCE 09:18:30 SIDEBAND SUPPRESSION * RBW 2 kHz Ref 11 dBm * Att 10 30 dB 1 * VBW 200 Hz SWT 7.6 s 0 1 AP VIEW Span 2.25 GHz -10 Marker 1 [T1 ] 10.11 dBm 500.000000000 MHz Delta 2 [T1 ] -87.02 1.211538462 Delta 3 [T1 ] -86.43 -1.211538462 dB MHz dB MHz -20 -30 -40 -50 -60 -70 3 2 -80 Center 500 MHz Date: 21.MAY.2007 09:39:41 300 kHz/ Span 3 MHz A PERFORMANCE PLOTS 1 AP VIEW * Att 1 10 * VBW 50 kHz INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH REFERENCE SIDEBAND SUPPRESSION * RBW 3 kHz Ref 11 dBm * Att 1 * VBW 5 kHz SWT 3.4 s 0 1 AP VIEW -10 Marker 1 [T1 ] 10.04 dBm 500.000000000 MHz Delta 2 [T1 ] -92.41 10.000000000 Delta 3 [T1 ] -92.77 -10.000000000 dB MHz dB MHz -20 -30 -40 -50 -60 -70 Center 2 3 -80 500 MHz Date: 21.MAY.2007 09:34:47 3 MHz/ Span 30 MHz A PERFORMANCE PLOTS 10 30 dB INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH HARMONIC SUPPRESSION RBW 3 MHz Ref 15 dBm 0 30 dB SWT 25 ms 2 -10 3 -20 Marker 1 [T1 ] 10.26 dBm 847.756410256 MHz Delta 2 [T1 ] -14.39 852.564102564 Delta 3 [T1 ] -30.13 1.705128205 Delta 4 [T1 ] -62.56 2.552083333 dB MHz A dB GHz dB GHz -30 -40 4 -50 -60 -70 -80 Start 500 MHz Date: 21.MAY.2007 350 MHz/ REFERENCE SIDEBAND SUPPRESSION 09:19:45 * RBW 3 kHz Ref 11 dBm * Att 30 dB 1 * VBW 5 kHz SWT 3.4 s 10 0 1 AP VIEW Stop 4 GHz -10 Marker 1 [T1 ] 10.21 dBm 850.000000000 MHz Delta 2 [T1 ] -92.08 10.000000000 Delta 3 [T1 ] -90.32 -10.000000000 dB MHz dB MHz -20 -30 -40 -50 -60 -70 3 -80 Center 850 MHz Date: 21.MAY.2007 09:36:49 2 3 MHz/ Span 30 MHz A PERFORMANCE PLOTS 10 1 AP VIEW * Att 1 * VBW 50 kHz INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH REFERENCE SIDEBAND SUPPRESSION * RBW 3 kHz Ref 11 dBm * Att 30 dB 1 * VBW 5 kHz SWT 3.4 s 0 1 AP VIEW -10 Delta 2 [T1 ] -92.08 10.000000000 Delta 3 [T1 ] -90.32 -10.000000000 dB MHz dB MHz -20 -30 -40 -50 -60 -70 3 -80 Center 850 MHz Date: 21.MAY.2007 09:36:49 2 3 MHz/ Span 30 MHz A PERFORMANCE PLOTS 10 Marker 1 [T1 ] 10.21 dBm 850.000000000 MHz INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH HARMONIC SUPPRESSION RBW 3 MHz Ref 15 dBm Marker 1 [T1 ] 9.62 dBm 1.198557692 GHz * VBW 50 kHz 30 dB SWT 35 ms 0 -10 2 dB GHz A dB GHz dB GHz -20 3 -30 -40 4 -50 -60 -70 -80 Center 3.25 GHz Date: 21.MAY.2007 510 MHz/ REFERENCE 09:21:48 Span 5.1 GHz SIDEBAND SUPPRESSION * RBW 2 kHz Ref 11 dBm * Att 10 30 dB 1 * VBW 200 Hz SWT 7.6 s Delta 2 [T1 ] -94.69 500.000000000 Delta 3 [T1 ] -93.25 -500.000000000 0 1 AP VIEW Marker 1 [T1 ] 9.63 dBm 1.200000000 GHz -10 dB kHz dB kHz -20 -30 -40 -50 -60 -70 -80 Center 3 1.2 GHz Date: 21.MAY.2007 09:41:56 2 300 kHz/ Span 3 MHz A PERFORMANCE PLOTS Delta 2 [T1 ] -26.40 1.201442308 Delta 3 [T1 ] -40.84 3.604326923 Delta 4 [T1 ] -53.37 2.402884615 1 10 1 AP VIEW * Att INTELLIGENT INTERACTIVE SYNTHESIZER SURFACE MOUNT MODEL: LFSW50120-50 500 - 1200 MHz WIDE BANDWIDTH REFERENCE SIDEBAND SUPPRESSION Ref 11 dBm * Att 30 dB 1 SWT 3.4 s 0 1 AP VIEW -10 Marker 1 [T1 ] 9.58 dBm 1.200000000 GHz Delta 2 [T1 ] -90.60 10.000000000 Delta 3 [T1 ] -90.90 -10.000000000 dB MHz dB MHz -20 -30 -40 -50 -60 -70 Center 2 3 -80 1.2 GHz Date: 21.MAY.2007 09:37:45 3 MHz/ Span 30 MHz A PERFORMANCE PLOTS 10 * RBW 3 kHz * VBW 5 kHz