TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 159.0125MHz SMD 7.0×5.0 mm TST Parts No.:TA0289A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 2006/08/24 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 159.0125 MHz MODEL NO.: TA0289A REV. NO.:2 A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.DC voltage: 5 V 3.Operating Temperature: -25°C to +70°C 4.Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Center Frequency Fc Insertion Loss ILmin (reference level) Bandwidth BW-3dB Absolute Attenuation(reference to ILmindB) Fc-50 ~ Fc-30 Fc-30 ~ Fc-15 Fc+30 ~ Fc+50 Source impedance Load impedance MHz MHz MHz Zs ZL Specification Min. Typ. Max. MHz dB MHz 6.025 159.0125 1.85 8.2 2.8 - dB dB dB Ω Ω 42 36 42 - 57 43 57 50 50 - Note: ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin. TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document C. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document D. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω 7 SAW Filter 2 50Ω 1,3,4,5,6,8,9,10 E.OUTLINE DRAWING: 2 8 9 T A □ Pin configuration: 7: Input 2: Output 1,3,4,5,6,8,9,10: Ground □ : Date Code Unit: mm Product Year Code Year Product Code 2001 2002 2003 2005 2006 2007 A a A 2004 2008 a TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document F. PCB Footprint : TAI-SAW TECHNOLOGY CO., LTD. 5 TST DCC Release document G. PACKING: 1. REEL DIMENSION 289 T A□ 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. 6 TST DCC Release document 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. 7 TST DCC Release document