TAYCHIPST ES2H

ES2A THRU ES2J
50V-600V
2.0A
SURFACE MOUNT SUPER FAST RECTIFIERS
Features
•
For surface mount applications.
•
Glass passivated junction.
•
Low profile package.
•
Easy pick and place.
•
Built-in strain relief.
•
Superfast recovery times for
high efficiency.
Absolute Maximum Ratings*
Symbol
IO
TA = 25°C unless otherwise noted
Parameter
Value
Units
2.0
A
50
A
1.66
13.3
75
W
mW/°C
°C/W
RθJA
Average Rectified Current
.375 " lead length @ TA = 110°C
Peak Forward Surge Current
8.3 ms single half-sine-wave
Superimposed on rated load (JEDEC method)
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Ambient**
RθJL
Thermal Resistance, Junction to Lead**
20
°C/W
Tstg
Storage Temperature Range
-50 to +150
°C
TJ
Operating Junction Temperature
-50 to +150
°C
if(surge)
PD
These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics
TA = 25°C unless otherwise noted
Parameter
Device
Units
2A
2B
2C
2D
Peak Repetitive Reverse Voltage
50
100
150
200
V
Maximum RMS Voltage
35
70
105
140
V
DC Reverse Voltage
(Rated VR)
Maximum Reverse Current
@ rated VR
TA = 25°C
TA = 100°C
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A
Maximum Forward Voltage @ 2.0 A
50
100
150
200
V
Typical Junction Capacitance
VR = 4.0 V, f = 1.0 MHz
E-mail: [email protected]
10
350
20
µA
µA
nS
0.90
V
18
pF
1 of 2
Web Site: www.taychipst.com
ES2A THRU ES2J
50V-600V
2.0A
SURFACE MOUNT SUPER FAST RECTIFIERS
10
IF, INSTANTANEOUS FORWARD CURRENT (A)
IO, AVERAGE FORWARD CURRENT (A)
0.75
2.0
1.6
1.2
0.8
0.4
0
25
75
50
100
125
150
Tj = 25°C
Pulse width = 300µs
1.0
0.1
0.01
175
0
60
Single Half-Sine-Wave
(JEDEC Method)
50
40
30
20
10
10
1.2
1.6
1000
Tj = 125°C
100
10
Tj = 25°C
1.0
0.1
0
1
0.8
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (µA)
IFSM, PEAK FORWARD SURGE CURRENT (A)
TT, TERMINAL TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
0.4
0
100
NUMBER OF CYCLES AT 60Hz
Fig. 3 Surge Current Derating Curve
40
80
120
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
trr
+0.5A
50Ω NI (Non-inductive)
10Ω NI
Device
Under
Test
(-)
0A
(+)
Pulse
Generator
(Note 2)
50V DC
Approx
(-)
1.0Ω
NI
Oscilloscope
(Note 1)
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
E-mail: [email protected]
-1.0A
Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
2 of 2
Web Site: www.taychipst.com