FR2A THRU FR2M 50V-1000V 2.0A SURFACE MOUNT FAST RECOVERY RECTIFIERS Features • The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 • Fast switching for high efficiency • Low reverse leakage • High forward surge current capability • For surface mounted applications Mechanical Data • Case: Molded plastic, DO-214AA (SMB). • Terminals: Solder plated, solderable per • MIL-STD-750, method 2026 • Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=90 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range VRRM VRMS VDC FR2A FR2B FR2D 50 35 50 100 70 100 200 140 200 FR2G FR2J FR2K FR2M UNITS 400 280 400 800 560 800 VOLTS VOLTS VOLTS 600 420 600 1000 700 1000 I(AV) 2.0 Amps IFSM 50.0 Amps VF 1.3 Volts IR 5.0 50.0 uA trr 150 CJ RqJA TJ,TSTG 250 50.0 20.0 -65 to +150 500 ns pF C/W C Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com FR2A THRU FR2M 50V-1000V 2.0A SURFACE MOUNT FAST RECOVERY RECTIFIERS E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com