Part Number 856880 1880 MHz SAW Filter Data Sheet Features For Base Station applications Usable bandwidth 60 MHz Low Loss Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View SMP-12 1.22 NOM. 1.32 MAX. 1 2 3 6 5 4 0.69 3.00 0.75 1.50 Pin No. 2 5 1,3,4,6 3.00 0.75 Description Input Output Case ground 0.60 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 – 6µm Ni plating Subject to change or obsolescence without notice Rev A 10/10 TriQuint Semiconductor Page 1 of 5 Part Number 856880 1880 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -30 to +85 oC Parameter (3) Center Frequency Maximum Insertion Loss 1850 – 1910 MHz Amplitude Variation 1850 – 1910 MHz Amplitude Variation over any 5MHz window 1850 – 1910 MHz Absolute Group Delay 1850 – 1910 MHz Group Delay Variation 1850 – 1910 MHz Phase Ripple 1850 – 1910 MHz Relative Attenuation (5) 50 – 110 MHz 300 – 400 MHz 920 – 965 MHz 965 – 1300 MHz 1300 – 1635 MHz 1635 – 1665 MHz 1665 – 1730 MHz 1730 – 1790 MHz 2030 – 2090 MHz 2573 – 2621 MHz 4074 – 4162 MHz 4791 – 4879 MHz Input/Output VSWR 1850 – 1910 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Minimum Typical (4) Maximum Unit - 1880 - MHz - 2.3 3.0 dB - 0.5 1.2 dB p-p - 0.2 0.8 dB p-p - 10.0 30 ns - 7.7 25 ns p-p - 12.0 30 ° p-p 35 35 35 25 25 25 25 10 20 30 20 18 55.5 45.0 41.0 40.5 37.0 37.7 34.7 19.7 25.2 34.2 31.0 23.0 - dB dB dB dB dB dB dB dB dB dB dB dB - 1.75 50 50 2:1 - Ω Ω Notes: 1. All specifications are based on TriQuint test circuit shown on page 4 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements on pcb at room temperature, unless otherwise noted 5. Relative to Maximum Insertion loss in passband 6. This is the optimum impedance in order to achieve the performance shown Subject to change or obsolescence without notice Rev A 10/10 TriQuint Semiconductor Page 2 of 5 Part Number 856880 1880 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 10/10 TriQuint Semiconductor Page 3 of 5 Part Number 856880 1880 MHz SAW Filter Data Sheet Matching Schematics Actual matching network values to be determined 5 2 50 Single-ended Input 50 50 50 Single-ended Output 1,3,4,6 Marking PCB Footprint 3.20 SQ TriQuint logo .96 Marking code 1.70 EH JJJYM 1.27 .81 ID dot Date code .38 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 12.8 2.7 TriQuint logo ID dot Ø330 4.0 0.254 2.0 Ø1.5 A 1.75 3.5 3.2 Ø102 Ø20.2 Ø13.0 1.4 2.0 Direction of travel 3.4 Section A-A 4.0 Ø1.0 A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev A 10/10 TriQuint Semiconductor Page 4 of 5 Part Number 856880 1880 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Input Power (1) Symbol Minimum Maximum T Tstg Pin -30 -40 - +85 +85 +22 Unit o C C dBm o Note: 1. Input Power is targeted for an applied CW modulated RF signal at 55 0C for 125 hours Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL, 2860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: [email protected] Web: www.triquint.com Rev A 10/10 Or contact one of our worldwide Network of sales offices, Representatives or distributors TriQuint Semiconductor Page 5 of 5