3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) 1. Explanation of Product Number H 2 U 3 4 W (1) 1 H (2) (3) 1 Q (4) 0 3 0 0 (5) Product Code: (1) Product Categories: 4: ceramic substrate chip antenna (2) Dimensions: W1: 3.2 x 1.6 x 0.5 (mm) (3) Material: H: AS 6 (4) Working Frequency: 1Q: 5150~5900MHz (5) Antenna Series: 03: serial number Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 1 OF A 12 2. Features *Stable and reliable in performances *Compact size *RoHS compliance *SMT processes compatible 3. Applications *IEEE802.11a (5150~5900 MHz). *HDMI PCMCIA cards or USB dongle 4. Description Unictron’s chip antenna series are specially designed for WiFi／HDMI application. Based on Unictron’s proprietary design and processes, this chip antenna has excellent stability and sensitivity to consistently provide high signal reception efficiency. 5. Electrical Specifications (40x40(mm) ground plane) 5-1. Characteristics Outline Dimensions Ground Plane Center Frequency* Bandwidth(under -10dB return loss) VSWR Impedance Polarization Gain Specifications Unit 3.2x1.6x0.5 40x40 5500 750 min. 2 max. 50 Linear Polarization mm mm MHz MHz 3.4 (typical) dBi 79 (typical) 0±20 max (@ -40℃~85℃) % Peak Efficiency Temperature Coefficient of Frequency Ω ppm/℃ *Center frequency will be offset to working frequency according to the conditions of user’s ground plane and radome. Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 2 OF A 12 5-2. Return Loss(S11) 6. Smith Chart(S11) Antenna Dimensions & Test Board(unit: mm) a. Antenna Dimensions Feed Side Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 3 OF A 12 b. Test Board with Antenna unit: mm Unit：mm Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 4 OF A 12 7. Radiation Pattern (40x40(mm) ground plane) 7-1. 3D Gain Pattern at 5150 MHz Z X Y Z X Y Z Z X Y X Y Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 5 OF A 12 7-2. 3D Gain Pattern at 5350 MHz Z X Y Z X Y Z Z X Y X Y Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 6 OF A 12 7-3. 3D Gain Pattern at 5700 MHz Z X Y Z X Y Z Z X Y X Y Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 7 OF A 12 7-4. 3D Gain Pattern at 5850 MHz Z X Y Z X Y Z Z X Y X Y Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 8 OF A 12 7-5. Efficiency Table Frequency(GHz) 5.000 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 Efficiency(dB) -1.75 -1.88 -1.82 -1.77 -1.03 -1.54 -1.83 -1.68 -1.57 -1.41 Efficiency(%) 66.83 64.86 65.75 66.53 78.89 70.15 65.61 67.92 69.66 72.28 Gain(dBi) 2.66 Frequency(GHz) 5.500 5.550 5.600 5.650 5.700 5.750 5.800 5.850 5.900 Efficiency(dB) -0.97 -0.97 -1.40 -1.84 -1.83 -1.42 -1.28 -1.55 -2.53 Efficiency(%) 79.98 79.98 72.44 65.46 65.61 72.11 74.47 69.98 55.85 Gain(dBi) 3.42 2.22 3.35 2.00 3.14 2.76 2.80 3.22 2.86 2.56 3.28 2.25 3.59 2.53 3.40 2.77 3.45 2.56 7-6. Efficiency vs. Frequency Efficiency vs. Frequency 90.00 Efficiency(%) 80.00 70.00 60.00 50.00 5.000 5.050 5.100 5.150 5.200 5.250 5.300 5.350 5.400 5.450 5.500 5.550 5.600 5.650 5.700 5.750 5.800 5.850 5.900 Frequency(GHz) Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 9 OF A 12 8. Layout Guide: a. Solder Land Pattern: Land pattern for soldering (gray marking areas) is as shown below. Depending on Customer’s requirement, matching circuit as shown below is also recommended . 1 2 3 Top View Back View Unit：mm b. Matching circuit：(Center frequency is about 5500MHz at 40x40(mm) ground plane) System Matching Circuit Component Location Description Vendor 1 0.3pF DARFNO(0402) 2 4.7pF DARFNO(0402) 3 0.47pF DARFNO(0402) Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 10 OF A 12 9. Soldering Conditions: a. Typical Soldering Profile for Lead-free Process 20-40s 260°C Temterature (°C) 217°C 150-200°C Pre-heating 60-150s 60-180s Time (s.) Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 11 OF A 12 10. Packing: (1) Quantity/Reel: 6000pcs/Reel (2) Plastic tape: 2.1 Tape Dimensions(unit: mm) Feature Specifications Tolerances W 12.00 ±0.30 P 8.00 ±0.10 E 1.75 ±0.10 F 5.50 ±0.10 P2 2.00 ±0.10 D 1.50 +0.10 -0.00 D1 --±0.10 Po 4.00 ±0.10 10Po 40.00 ±0.20 1. Cumulative tolerance of 10 sprocket hole pitch: ±0.20mm 2. Carrier camber not to exceed 1mm in 250mm 3. Ao and Bo measured on a plane above the inside bottom of the pocket. 4. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 5. All dimensions meet EIA-481-B requirements. 6. Material: □ Clear Non Anti-Static Polystyrene. ■ Black Conductive Polystyrene. 2.2 Pocket Dimensions(unit: mm) Feature Specifications Tolerances Ao 1.90 +0.20 -0.10 Bo 3.50 Ko 0.60 ±0.05 t 0.30 ±0.05 11. Storage Conditions: (1) Temperature: -25℃ to 85℃ (2) Relative Humidity: 20% to 70% Tolerances (Unless otherwise specified) X: ± 1 X.X : ± 0.1 X.XX : ± 0.01 Angle : ± Hole Dia. : ± Scale : Unit：mm Prepared By : Meiping Checked By :Chinling Designed By : Chinling Approved By : Herbert TITLE： 3.2 x 1.6 x 0.5 WiFi／HDMI Ceramic Chip Antenna (AA106) Unictron Technologies Corporation Website: www.unictron.com THIS SPECIFICATION IS THE PROPERTY OF UNICTRON TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION DOCUMENT NO. REV. H2U34W1H1Q0300 PAGE 12 OF A 12