OCXO C4400 Typical Applications Features Base Stations Test Equipment Synthesizers Digital Switching 4-Pin Dip Surface Mount Package Optional Fast Warm-up TCXO Replacement for better short term stability Previous Vectron Model Numbers 4887, TQDILOC, OC-400 Frequency range 10 MHz – 160 MHz Standard frequencies 10; 12, 12.8, 16.384, 19.44, 20, 38.88, 51.84, 133Mhz Frequency stabilities1 [AT-Cut Crystal – Standard – 10 to 160MHz] Parameter vs. operating temperature range (Referenced to +25°C) Min -100 -250 -250 Min -0.5 -10 -10 -10 -300 -500 Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Typ Typ Max. +100 +250 +250 Max. +0.5 +10 +10 +10 +300 +500 2 Units ppb ppb ppb Units ppm ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 … +70°C D107 -20 … +70°C D257 -40… +85°C F257 Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation ≤ 60MHz; after 30 days of operation >60MHz; after 30 days of operation to ± 100ppb of final frequency (1 hour reading) @ +25°C Frequency stabilities1 [SC Cut Crystal – Option – 10 to 52MHz] Parameter vs. operating temperature range (Referenced to +25°C) Min -10 -25 -50 Min -0.2 -10 -10 -5 -100 -500 Typ Min 4.75 Typ 5 Supply voltage [Option] 11.4 12.0 12.6 VDC Supply voltage [Option] 3.135 3.3 3.465 VDC 2.5 Watts during warm-up 1.0 Watts steady state @ +25°C Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Typ Max. +10 +25 +50 Max. +0.2 +10 +10 +5 +100 +500 2 Units ppb ppb ppb Units ppm ppb ppb ppb ppb ppb minutes Max. 5.25 Units VDC Operating temp range Ordering Code -20 … +70°C D108 -20 … +70°C D258 -40… +85°C F508 Condition at time of shipment, nominal EFC VS ± 5% Load ± 5% after 30 days of operation ≤ 60MHz; after 30 days of operation >60MHz; after 30 days of operation to ± 100ppb of final frequency (1 hour reading) @ +25°C Supply voltage (Vs) Parameter Supply voltage [Standard] Power consumption Condition Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Ordering Code SV050 SV120 SV033 v.2006-11-10 · page 1 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4400 RF output Parameter Signal [Standard] Load Min Typ Max. Units 0.5 0.3 55 VDC VDC VDC VDC % 8 -30 11 Ω dBm dBc dBm Condition Ordering Code RFH HCMOS 15 pF Signal Level (Vol) Signal Level (Voh) 3.7 2.4 45 Duty cycle Signal [Option] Load Output Power@3,3V supply volt. Harmonics Power@5V Sinewave 2 50 5 5 8 with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=12.0V or 5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 RFS 50 Ohm load 50 Ohm load 50 Ohm load Frequency Tuning (EFC) 10 to 80MHz Parameter Tuning Range Min Tuning Range ±5.0 Typ Max. Fixed OCXO; No adjust ±12 ±1.0 Linearity Units 5 Condition Ordering Code 0 ppm with AT cut Crystal 1 ±3 ppm with SC cut Crystal 1 5 % Positive Tuning Slope Control Voltage Range 0 2 4 VDC with Vs=12.0V or 5.0V Control Voltage Range 0.0 1.4 2.8 VDC with Vs=3.3V Min Typ Additional parameters Parameter 3 Phase Noise Weight Processing & Packing Max. -65 -95 -120 -140 -145 8.0 Handling & processing note Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 1 10 100 1 10 Condition Hz Hz Hz kHz kHz @ 10 MHz Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Output Load Operable temperature range Storage temperature range -55 -55 Typ Max. 7.0 28 7.0 50 +85 +125 Units V V V pF °C °C Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition with Vs=5.0VDC with Vs=12VDC with Vs=3.3VDC v.2006-11-10 · page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4400 Enclosures Type A Package Codes: Code A1 A2 Type B Height “H” 9.3 8.3 Pin Length “L” 5.85min. 5.85min. Code B1 Height “H” 10.4 Pin Length “L” NA 18.48 10.81 "H" MAX 15.24 1 7 14 8 12.70 2.5 2.5 20.32 Dimensions: Imm Dimensions: mm Pin Connections 1 7 8 14 Pin Connections Electrical Frequency Adjust Input (EFC) Ground (Case) RF Output Supply Voltage Input 1 7 8 14 Electrical Frequency Adjust Input (EFC) Ground (Case) RF Output Supply Voltage Input Standard Shipping Method (For Type B Enclosures) Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Type B 44 Quantity per meter 50 Quantity per reel 300 Dimension P 20 Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 3 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4400 Recommended Reflow Profile tp Critical Zone Tp TL to Tp Ramp up TL tL Temperature Ts Ramp dow n Ts ts preheat 25 t 25°C to peak Time Pb-Free Assembly /Sn-Pb Assembly Profile Feature Profile Feature Pb-Free Assembly /Sn-Pb Assembly Average ramp-up rate (T L to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (T L) - Time (tL) 217°C 60-150 seconds Tsmax to T L - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (T L) - Time (tL) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 4 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax OCXO C4400 How to order this product: Step 1 Use this worksheet to forward the following information to your factory representative : Model Supply Voltage Code Stability Code C4400 D107 SV050 Vs.operat. Temp. Range D107: D257: F257: D108: D258: F508: ±100ppb ±250ppb ±250ppb ±10ppb ±25ppb ±50ppb RF Output Code Package Code Frequency Control/ Enable Frequency A1 1 10MHz RFH Signal: -20 …+70°C -20 …+70°C -40 …+85°C -20 …+70°C -20 …+70°C -40 …+85°C Tuning Range: RFH: HCMOS 0: Fixed OCXO; No adjust 1: ±5.0 ppm.. ±12 ppm(AT) 1: ±1.0 ppm ..±3.0 ppm(SC) Enclosure: A1: H: 9.3 L: 5.85min A2: H: 8.3 L: 5.85min A3: H: 10.4 L: NA Supply: SV050: 5V SV120: 12V SV033: 3.3V Step 2 The factory representative will then respond with a Vectron Model Number in the following configuration: Model Package Code Dash Dash Number C4400 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C4400A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-11-10 · page 5 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax