PB1000S – PB1010S WTE POWER SEMICONDUCTORS Pb 10A SINGLE-PHASE BRIDGE RECTIFIER Features ! ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705 H G + A ~ - Mechanical Data ! ! ! ! ! ! ! ! Case: KBPC-6, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 3.8 grams (approx.) Mounting Position: Through Hole for #6 Screw Mounting Torque: 10 cm-kg (8.8 in-lbs) Max. Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 KBPC-6 Min Max 14.73 15.75 5.80 6.90 19.00 — 1.00 Ø Typical 1.70 2.72 Hole for #6 screw G 3.60 4.00 10.30 11.30 H All Dimensions in mm ~ E D Dim A B C D E C B A Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C PB PB PB PB PB PB PB 1000S 1001S 1002S 1004S 1006S 1006S 1010S Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage per leg VFM 1.1 V IR 5.0 500 µA I2t Rating for Fusing (t<8.3ms) (Note 2) I2t 127 A2s Typical Junction Capacitance (Note 3) Cj 110 pF Typical Thermal Resistance per leg (Note 1) RJC 6.0 °C/W Operating and Storage Temperature Range Tj, TSTG -65 to +125 °C Peak Reverse Current At Rated DC Blocking Voltage @IF = 5.0A @TA = 25°C @TA = 125°C Note: 1. Mounted on metal chassis. 2. Non-repetitive, for t > 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. PB1000S – PB1010S 1 of 4 © 2006 Won-Top Electronics 10 10 Resistive or Inductive load Mounted on Metal chassis 8 IF, FORWARD CURRENT (A) IAV, AVERAGE FORWARD OUTPUT CURRENT (A) Mounted on PC Board 6 4 2 0.1 Tj = 25°C Pulse width = 300µs 0.01 0 25 50 75 100 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 125 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element IR, INSTANTANEOUS REVERSE CURRENT (µA) 150 IF, PEAK FORWARD SURGE CURRENT (A) 1.0 TC = 50°C Single half sine-wave JEDEC method 125 100 75 50 25 0 1.0 10 100 Tj = 100°C 1.0 0.1 Tj = 25°C 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current PB1000S – PB1010S 10 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION AC + WTE PB10xxS WTE PB10xxS xx Polarity = Manufacturer’s Logo = Device Number = 00, 01, 02, 04, 06, 08 or 10 = As Marked on Body PACKAGING INFORMATION BULK Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 198 x 198 x 50 200 425 x 215 x 280 2,000 8.0 Note: 1. Paper box, white or brown color. PB1000S – PB1010S 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity PB1000S Square Bridge 200 Units/Box PB1001S Square Bridge 200 Units/Box PB1002S Square Bridge 200 Units/Box PB1004S Square Bridge 200 Units/Box PB1006S Square Bridge 200 Units/Box PB1008S Square Bridge 200 Units/Box PB1010S Square Bridge 200 Units/Box 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, PB1000S-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. PB1000S – PB1010S 4 of 4 © 2006 Won-Top Electronics