CRO5100Z PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Satellite Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5090 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -104 Harmonic Suppression (2nd) -40 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 5110 MHz dBc/Hz -17 dBc 4.5 Vdc MHz/V 10 0 6 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 4 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 0 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 3 VCO-24H Min Typ 5 118 Vdc 141 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CRO5100Z Rev C3 Tuning Curve, typ. 5125 FREQUENCY (MHz) 5120 5115 5110 5105 85 °C 25 °C 0 °C 5100 5095 5090 5085 5080 5075 5070 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 0.030 MIN. CUTBACK FROM LIVE PADS 5 4 3 2 1 0 5075 5080 5084 5089 5093 5098 5103 5108 5114 5120 FREQUENCY (MHz) 85 °C 25 °C 0 °C Physical Dimensions 24 23 22 21 20 PIN CONFIGURATION 2 3 4 5 6 7 19 Z-COMM XXXXXXXX-LF W/O# D/C 1 8 18 17 16 15 P1 P2-12 P13 P14-16 P17 P18-24 RF OUTPUT GROUND Vcc GROUND Vtune GROUND 14 13 9 10 11 12 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B