SMV1505A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Synthesizer Sub-assemblies • Portable Receivers • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1505 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -99 Harmonic Suppression (2nd) -18 Tuning Voltage 0 Max Units 1505 MHz dBc/Hz -16 dBc 5 Vdc MHz/V 31 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 4 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 2 SUB-L Min Typ Supply Voltage (Vcc, nom.) 3 Supply Current (Icc) 13 Vdc 16 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV1505A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 1580 FREQUENCY (MHz) 1560 1540 1520 1500 85 °C 25 °C 1480 1460 1440 -40 °C 1420 1400 1380 1360 1340 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 5 RECOMMENDED FOOTPRINT 4 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 0.030 MIN. CUTBACK FROM LIVE PADS 1 0 1361 1390 1414 1435 1454 1472 1489 1506 1522 1537 1553 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B