SMV1960L-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radio • PCS Handhelds • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1938 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -90 Harmonic Suppression (2nd) -14 Tuning Voltage 1 Max Units 1983 MHz dBc/Hz -8 dBc 4 Vdc MHz/V 100 Tuning Sensitivity (avg.) 16.5 dBm Input Capacitance 50 pF Pushing 9 MHz/V Pulling (14 dB Return Loss, Any Phase) 19 MHz 85 °C Max Units Power Output 10 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 13.25 SUB-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 20 Vdc 25 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV1960L-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 2170 FREQUENCY (MHz) 2120 2070 2020 1970 1870 85 °C 25 °C 1820 -40 °C 1920 1770 1720 1670 1620 0 0.5 1 1.5 2 2.5 3 3.5 4 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 14 RECOMMENDED FOOTPRINT 13 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 12 11 10 9 8 7 0.030 MIN. CUTBACK FROM LIVE PADS 6 5 4 1673 1730 1783 1833 1888 1942 2001 2056 2108 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B