SMV2660L PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Links • WLAN • Portable Radios £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2620 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -91 Harmonic Suppression (2nd) -12 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 2700 MHz dBc/Hz -9 dBc 4.5 Vdc MHz/V 90 11 16 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (20. dB Return Loss, Any Phase) 30 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -30 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 13.5 SUB-L Min Typ 5 21 Vdc 25 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module SMV2660L Rev B2 Tuning Curve, typ. 2900 FREQUENCY (MHz) 2850 2800 2750 2700 85 °C 25 °C -30 °C 2650 2600 2550 2500 2450 2400 2350 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 16 RECOMMENDED FOOTPRINT 15 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 14 13 12 11 10 9 0.030 MIN. CUTBACK FROM LIVE PADS 8 7 6 2395 2488 2557 2614 2663 2708 2746 2779 2811 2837 FREQUENCY (MHz) 85 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B