V586ME06-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radio • Test Instrumentation • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1400 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -98 Harmonic Suppression (2nd) -8 Tuning Voltage 1.75 Max Units 2050 MHz dBc/Hz -7 dBc 12 Vdc MHz/V 84 Tuning Sensitivity (avg.) 10 dBm 100 pF Pushing 4 MHz/V Pulling (14 dB Return Loss, Any Phase) 15 MHz 85 °C Max Units Power Output 3 Load Impedance 6.5 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 12 Supply Current (Icc) 20 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V586ME06-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 2230 2160 2090 2020 1950 1880 1810 1740 1670 1600 1530 1460 1390 1320 1250 1180 1110 1040 970 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 1003 1208 1345 1457 1555 1645 1729 1810 1887 1964 2039 2114 2189 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B