ZRO0833A1LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communication Systems • Digital Radio Equipment • Fixed Wireless £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 826 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -122 Harmonic Suppression (2nd) -15 Tuning Voltage 0.3 Max Units 841 MHz dBc/Hz -14 dBc 4.7 Vdc MHz/V 5 Tuning Sensitivity (avg.) -2 dBm Input Capacitance 50 pF Pushing .2 MHz/V Pulling (14 dB Return Loss, Any Phase) .1 MHz 85 °C Max Units Power Output -6 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements -4 MINI-16-SM Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 13 Vdc 16 mA Additional Notes Phase Noise @ 1 kHz offset (1 Hz BW) -95 (typ) dBc/Hz Phase Noise @ 100 kHz offset (1 Hz BW) -140 (typ) dBc/Hz LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B ZRO0833A1LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 850 840 85 °C 25 °C 830 -40 °C 820 810 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.7 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. -2 -3 -4 0.030 MIN. CUTBACK FROM LIVE PADS -5 -6 817 822 826 829 832 835 838 841 843 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B