3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Right Angle Plug - Shielded 101 Series • Wiper-on-wiper contact for reliable repetitive plugging • Rugged die cast metal case construction • Screw or ground lock PCB retention • Normal and reverse “D” interface options for board to board flexibility • IEEE 1284C Interface as a 36 contact connector • Contacts: 20, 26, 36 and 50 • See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: November 26, 2007 TS-0620-B Sheet 1 of 4 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplating: Wiping Area: Glass Reinforced Polyester Body UL 94V-0 Black Copper Alloy 80 μ″ [ 2.0 μm ] Min. Nickel 30 μ″ [ 0.76 μm ] Min. Gold Solder Tail Plating: Gold flash over Nickel (RIA E1 & C1 apply) Body Material: Zinc Alloy Plating Nickel Ground Lock Material: Copper Alloy Plating: Tin in combination with Gold flash plated tail Marking: 3M Logo and Part Number Electrical Current Rating: 1 A Insulation Resistance: > 5 × 108Ω at 500 VDC Withstanding Voltage: 500 VRMS for 1 Minute Environmental Temperature Rating: -20°C to +85°C Process Rating: Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat, 60 sec. max. duration UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Right Angle Plug - Shielded 101 Series Dimensions Contact Quantity A B C D 20 .450 [11.43] .71 [18.1] 1.081 [27.45] 1.31 [33.3] 26 .600 [15.24] .87 [22.0] 1.231 [31.26] 1.46 [37.2] 36 .850 [21.59] 1.11 [28.3] 1.481 [37.61] 1.71 [43.5] 50 1.200 [30.48] 1.46 [37.2] 1.831 [46.5] 2.06 [52.4] 2X PCB Lockdown Thread (see ordering information) .12 [3.0] .15 [3.8] .34 [8.6] 3X .075 [1.91] .65 [16.5] .188 [4.79] .18 [4.8] .31 [7.9] Position 1 .01 [0.3] .33 [8.4] D C .38 [9.7] .26 [6.6] .36 [9.1] .19 [4.8] Position .02 [0.5] .15 [3.8] 15° 2X Panel Thread (see ordering information) .01 [0.2] .050 [1.27] Last Position A B Normal Type (see ordering information) Optional Ground Lock 2X (see ordering information) In ch [m m ] T o leranc e U nless N o te d Reverse Type (see ordering information) inc h .0 .00 ± .1 ± .01 ± .005 .000 [ ] D im e n sion s fo r R e fe re nce O n ly Ordering Information 101XX-X2X2PC Contact Quantity Mounting Feature 5 = Boardmount Right Angle Normal Type 7 = Boardmount Right Angle Reverse Type Panel/Board Retention Feature 20, 26, 36 pos: 1 = M2.5 panel/M2.5 screw lock B = M2.5 panel/ground lock 50 pos: 4 = 4-40 panel/4-40 screw lock E = 4-40 panel/ground lock TS-0620-B Sheet 2 of 4 Use (M2.5 x 8 mm) screws to mount to panel with max. thickness of .079 [2.0]. 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Right Angle Plug - Shielded 101 Series Recommended Board Layout (Normal Type Plug) Dimensions Contact Quantity A B 20 .450 [11.43] 1.081 [27.45] .93 [23.7] 26 .600 [15.24] 1.231 [31.26] 1.08 [27.5] 36 .850 [21.59] 1.481 [37.61] 1.33 [33.9] 50 1.200 [30.48] 1.831 [46.50] 1.685 [42.80] (Plug viewed from connector side; receptacle viewed from bottom side) C Boardmount Plug (Right Angle Normal type) 101XX-52X2 Receptacle (Right Angle type) 102XX-5XXX .57 [14.5] For 26 or 50 Position Plug Only For 20 or 36 Position Plug Only 2X Mounting Holes (See Note 1) 2X Mounting Holes (See Note 1) .35 [9.0] 2X 0.16 [4.0] 2X .16 [4.0] 3X .075 [1.91] 2X .20 [5.0] B ± .004 ∅ .028 ± .003 Typ [0.71] Position Connecting with Position 1 Connecting with Row .19 Max [4.8] Notes: 1. Plated-through PC board mounting Holes for 0.062 [1.57] board thickness: Grounding Flange (Screw Lock) - ∅ .110 ± .003 [2.79] (20, 26, 36 pos) Ground Lock - ∅ .100 ± .003 [2.54] Grounding Flange (Screw Lock) - ∅ .120 ± .003 [3.05] (50 pos) 2. Panel thickness .079 [2.00] Max. Interconnect Solutions http://www.3M.com/interconnects/ Position 1 Position 3 .04 [1.1] R .060 [1.52] 3M Position 3 Position 2 Position 3 Connecting with Position .050 [1.27] Position 1 Position Position 2 Connecting with Position 1 Position 2 A Position 3 .050 [1.27] 3X .075 [1.91] 2X .20 [5.0] Position 2 B ± .004 A .35 [9.0] .04 [1.1] .19 Max [4.8] C ± .004 .340 ± .004 [ 8.64 ] B ± .004 Recommended Panel Cut-Out (See Notes) TS-0620-B Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Right Angle Plug - Shielded 101 Series Dimensions Contact Quantity A B C Recommended Board Layout (Reverse Plug) 20 .450 [11.43] 1.081 [27.45] .93 [23.7] (Plug viewed from Connector side Receptacle viewed from bottom side) 26 .600 [15.24] 1.231 [31.26] 1.08 [27.5] 36 .850 [21.59] 1.481 [37.61] 1.33 [33.9] 50 1.200 [30.48] 1.831 [46.50] 1.685 [42.80] Boardmount Plug (Right Angle Reverse type) 101XX-72X2 Receptacle (Right Angle type) 102XX-5XXX .57 [14.5] For 20 or 36 Position Plug Only For 26 or 50 Position Plug Only Connecting with Position 1 .35 [9.0] Position 3 Connecting with Position 1 Position 2 .35 [9.0] Connecting with Row Row Row Position 1 Position 3 A 2X .20 [5.0] B ± .004 ∅ .028 ± .003 [0.71] 2X Mounting Holes (See Note 1) 2X .20 [5.0] ∅ .028 ± .003 [0.71] 2X .16 [4.0] .04 [1.1] .19 Max [4.8] .04 [1.1] 2X Mounting Holes (See Note 1) .19 Max [4.8] 3X .075 [1.91] Notes: 1. Plated-through PC board mounting Holes for 0.062 [1.57] board thickness: Grounding Flange (Screw Lock) - ∅ .110 ± 0.003 [2.8] (20, 26, 36 pos) Ground Lock - ∅ .100 ± 0.003 [2.6] Grounding Flange (Screw Lock) - ∅ .120 ± 0.003 [3.0] (50 pos) 2. Panel thickness .079 [2.00] Max. 3M Interconnect Solutions http://www.3M.com/interconnects/ Position 2 .050 [1.27] Position 3 A 2X .16 [4.0] Position 1 Position 2 .050 [1.27] B ± .004 Position 2 Position 3 Connecting with Row 3X .075 [1.91] R .060 [1.52] C ± .004 .340 ± .004 [8.64] B ± .004 Recommended Panel Cut-Out (See Notes) TS-0620-B Sheet 4 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-c Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2007. All rights reserved. RIA-2217B-c 3M is a trademark of 3M Company.