SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 1 PROD. ABC'S DWG NO. SMD POWER INDUCTOR NAME SR1307□□□□L□-□□□ ABC'S ITEM NO. 101 A Ⅰ﹒CONFIGURATION & DIMENSIONS： Marking Dot is start winding & Inductance code m/m B : 7.0±0.3 m/m C : 5.0 ref. m/m D : 14.0 ref. m/m E : 14.0 ref. m/m F : m/m 4.5 ref. B A A : 13.0±0.7 D F E C ( PCB Pattern ) Ⅱ﹒SCHEMATIC DIAGRAM： a b Ⅲ﹒MATERIALS： a﹒Core：Ferrite DR core b﹒Wire ：Enamelled copper wire ( class F & H) c﹒Terminal：Ag/Ni/Sn d﹒Remark：Products comply with RoHS' requirements AR-001A c Temperature Rising Area Preheat Area +4.0℃ / sec max. 150 ~ 200 ℃ / 60 ~ 120sec Reflow Area +2.0 ~ 4.0℃ / sec max. Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅳ﹒GENERAL SPECIFICATION： 50sec max. Temperature ( ℃ ) a﹒Temp. rise ：40℃ max. b﹒Rated current：Base on temp. rise & △L / L0A=10% typ. c﹒Storage temp.：-40℃ ----+125℃ d﹒Operating temp.：-40℃----+105℃ e﹒Resistance to solder heat：260℃.10 secs. Peak Temp：260℃ max. Max time above 230℃ ：50sec max. Max time above 200℃ ：70sec max. 230℃ 200 150 70sec max. 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 2 PROD. NAME ABC'S DWG NO. SMD POWER INDUCTOR SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅴ﹒ELECTRICAL CHARACTERISITCS： DWG No. SR13071R5ML□ -□□□ SR13072R2ML□ -□□□ SR13072R7ML□ -□□□ SR13073R3ML□ -□□□ SR13074R7ML□ -□□□ SR13075R6ML□ -□□□ SR13076R8ML□ -□□□ SR13078R2ML□ -□□□ SR1307100ML□ -□□□ SR1307120ML□ -□□□ SR1307150ML□ -□□□ SR1307180ML□ -□□□ SR1307220ML□ -□□□ SR1307270ML□ -□□□ SR1307330KL□ -□□□ SR1307390KL□ -□□□ SR1307470KL□ -□□□ SR1307560KL□ -□□□ SR1307680KL□ -□□□ SR1307820KL□ -□□□ SR1307101KL□ -□□□ SR1307121KL□ -□□□ SR1307151KL□ -□□□ SR1307181KL□ -□□□ SR1307221KL□ -□□□ SR1307271KL□ -□□□ SR1307331KL□ -□□□ SR1307391KL□ -□□□ SR1307471KL□ -□□□ SR1307561KL□ -□□□ SR1307681KL□ -□□□ SR1307821KL□ -□□□ SR1307102KL□ -□□□ Inductance ( μH ) 1.5±20% 2.2±20% 2.7±20% 3.3±20% 4.7±20% 5.6±20% 6.8±20% 8.2±20% 10.0±20% 12.0±20% 15.0±20% 18.0±20% 22.0±20% 27.0±20% 33.0±10% 39.0±10% 47.0±10% 56.0±10% 68.0±10% 82.0±10% 100.0±10% 120.0±10% 150.0±10% 180.0±10% 220.0±10% 270.0±10% 330.0±10% 390.0±10% 470.0±10% 560.0±10% 680.0±10% 820.0±10% 1000.0±10% Q ref. 20 22 24 26 25 24 24 24 22 25 28 28 40 35 35 28 24 22 24 18 25 20 20 18 15 15 15 12 12 10 10 10 10 SRF Test Freq. ( Hz ) ( MHz ) L Q nom. 100K 7.960M 65.0 100K 7.960M 50.0 100K 7.960M 40.0 7.960M 38.0 100K 7.960M 36.0 100K 7.960M 28.0 100K 7.960M 26.0 100K 24.0 7.960M 100K 22.0 2.520M 100K 20.0 2.520M 100K 2.520M 17.0 100K 2.520M 16.0 100K 15.0 2.520M 100K 11.0 2.520M 100K 10.0 2.520M 100K 9.0 2.520M 100K 7.5 2.520M 100K 7.2 2.520M 100K 7.0 2.520M 100K 6.0 2.520M 100K 5.8 0.796M 100K 5.5 0.796M 100K 4.5 0.796M 100K 4.0 0.796M 100K 3.8 0.796M 100K 0.796M 3.5 100K 0.796M 3.2 100K 0.796M 2.5 100K 0.796M 2.2 100K 0.796M 2.0 100K 0.796M 1.6 100K 0.796M 1.5 100K 0.252M 1.4 100K 1). □：Packaging information… A：Bulk B：Taping Reel 2)."":Reference code 3). Inductance Test Freq. at 100KHz / 0.1V. 4). Irms Base on △T = 40℃ max. 5). Isat Base on △L/L0A = 10％ typ. □□□ AR-001A RDC ( mΩ ) max. 5.0 6.0 8.0 8.7 10.0 15.0 17.0 19.0 21.0 30.0 34.0 36.0 47.0 60.0 65.0 75.0 82.0 100.0 120.0 140.0 180.0 210.0 250.0 280.0 360.0 410.0 520.0 600.0 720.0 880.0 1000.0 1300.0 1600.0 Irms (A) Isat (A) 9.50 9.00 8.20 7.50 7.00 6.50 6.00 5.80 5.60 4.80 4.50 4.20 3.60 3.30 3.10 2.90 2.70 2.50 2.30 2.10 1.90 1.80 1.60 1.50 1.30 1.20 1.10 1.00 0.90 0.85 0.80 0.75 0.65 20.00 18.00 16.00 15.00 13.00 11.00 10.50 9.80 9.20 8.00 7.50 7.00 6.50 5.50 5.00 4.60 4.20 3.80 3.50 3.20 3.00 2.80 2.60 2.30 2.10 1.80 1.60 1.50 1.40 1.30 1.20 1.10 1.00 SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 3 PROD. NAME ABC'S DWG NO. SMD POWER INDUCTOR SR1307□□□□L□-□□□ ABC'S ITEM NO. Inductance（uH） Ⅵ﹒INDUCTANCE VS. DC CURRENT CURVE： 103 7 5 102 3 2 331 102 7 5 101 3 2 330 101 7 5 100 3 2 2R7 100 10-1 2 3 5 7 100 2 3 5 7 101 2 3 DC Current (A) AR-001A 5 7 102 SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 4 PROD. ABC'S DWG NO. SMD POWER INDUCTOR NAME SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅶ﹒PACKAGING INFORMATION： ( 1 ) Configuration T Cover tape N B A 2.0±0.5 ∮C ∮C D G Embossed Carrier ※Carrier tape width : D P:20 m/m 4 m/m End Start 101 101 101 101 101 Leader no component 200 m/m min. Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 24 330 B 21±0.8 C 13±0.5 D 24 G 26 +0 N 50 -0 T 30.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Series SR1307 AR-001A Outer : Carton Q'TY (pcs) G.W. (gw) Style 400 1,800 13 - 24 Q'TY (pcs) 1,600 G.W. (Kg) 9.5 Size (cm) 40 x 40 x 24 SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 5 PROD. ABC'S DWG NO. SMD POWER INDUCTOR NAME SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅷ﹒DWGING NUMBER EXPRESSION： S R 1 3 0 7 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001A Inner package A T.B.D. B T / R ( Reel package ) Inner package Q'TY T.B.D. 400 pcs Remark SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 6 PROD. ABC'S DWG NO. SMD POWER INDUCTOR NAME SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅸ﹒RELIABILITY TEST： Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 95% of the terminal electrode Shall be covered With fresh solder. Preheat : 155℃ / 4 hours. Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5℃ Flux : Rosin Dip time : 5±0.5 seconds Electrical oharacteristics shall not change more than ±20% Room temp. 15 minutes -40 ℃ 30 minutes Room temp. 15 minutes +105 ℃ Total : 50 cycles Humidity test Temperature : 40±2℃ Humidity : 90±5% Time : 1000 hours High temp. Resistance test Temperature : 105±5℃ Applied current : Per spec. Time : 96 hours AR-001A 30 minutes SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 7 PROD. NAME ABC'S DWG NO. SMD POWER INDUCTOR SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅹ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 OC ____ ____ Polyamideimide Polyamide Modified Epoxy ____ ____ Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Modified Polyester Polyurethane 287806002 Mtl Dsg Coat Typ E174837 ANSI Type Temp Class MW81-C MW75C MW35C ___ ___ 220 130 200 180 200 ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ 180 180 MW26C MW79 ____ ____ ____ ____ ____ ____ BC Coat Typ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane 155 155 A not-for-profit organization dedicated to public safety and committed to quality service Page 1 of 2 Mark Dsg 220 200 155 155 130 155 155 155 180 155 155 155 OC ANSI Type Temp Class Polyamide ____ ____ ____ Nylon Polyamide MW80C MW2-C ___ MW75C MW28-C MW28-C 155 105 130 130 130 130 @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. or 榮星電線 , material designation or marked designation on packaed or reel, and Marking: Company name or trademarks Recognized Component Mark. See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AR-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000 SPECIFICATION FOR APPROVAL REF : 20090728-A PAGE: 8 PROD. NAME ABC'S DWG NO. SMD POWER INDUCTOR SR1307□□□□L□-□□□ ABC'S ITEM NO. Ⅹ﹒UL CARD： OBMW2 Magnet Wire-Comporent October 06, 2005 ELEKTRISOLA (MALAYSLA) SDN BHD JALAN DAMAI SATU JANDA BAIK 28750 BENTONG, PAHANG DARUL MAKMUR MALAYSIA Coating Type Mtl Dsg Estersol 180 Mark Dsg E180 BC Amldester 200 Polysol-N 155 A200 PN155 Polyesterimide (solderable) Polyesterimide Polyurechane Polysol 155 P155, G155 Polyurechane Polysol 155g Polysol 155p Polysol 160 Polysol 180 Pg155 Pp155,Gp155 P160 P180,G180 Polyurechane Polyurechane Polyurechane Polyurechane Polysol 170 Polysol-N 180 Polysol P155p P170 or G170 PN180 P155p Polyurechane Polyurechane OC ____ ____ Nylon ____ ____ ____ ____ ____ ____ Nylon ____ E143312 ANSI Typ Temp Class MW-77 180 MW-74 MW-80, MW-28 MW-79, MW-75 MW-75 MW-79 MW-79 MW-82 MW-79 MW-79 MW-83 MW-79 200 155, 130 155, 130 130 155 155 180 155 155 180 155 Marking：Company name, material designation or marked designation and factory identification on package ok reel See General Information preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. AR-001A