SPECIFICATION FOR APPROVAL PAGE: 1 REF : PROD. NAME ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS: A B A : 2.80 ±0.20 m/m B : 3.30 ±0.20 m/m C : 1.35 ±0.15 m/m D : 0.90 typ. E : 0.90 typ. m/m m/m F1 : 1.30 ref. m/m F2 : 3.00 ref. m/m G : 0.65 ref. m/m H : 2.10 ref. m/m I : 1.20 ref. m/m J : 1.00 ref. m/m R : 1.00 ref. m/m F2 I I J R OR G H G F1 Ⅱ﹒SCHEMATIC DIAGRAM: 1.24 typ. ( PCB Pattern Suggestion ) Ⅲ﹒MATERIALS: a﹒Core:Ferrite DR core b﹒Core:Ferrite RI core c﹒Wire :Enamelled copper wire ( Class H ) d﹒Adhesive :Epoxy resin e﹒Terminal:Ag/Ni/Sn f﹒Remark:Products comply with RoHS' requirements Peak Temp:260℃ max. Max time above 230℃ :50sec max. Max time above 200℃ :70sec max. Temperature Rising Area Preheat Area +4.0℃ / sec max. 150 ~ 200℃ / 60 ~ 120sec Reflow Area +2.0 ~ 4.0℃ / sec max. Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅳ﹒GENERAL SPECIFICATION: a﹒Temp. rise :40℃ typ. b﹒Storage temp.:-40℃ ----+125℃ c﹒Operating temp.:-40℃----+105℃ d﹒Resistance to solder heat:260℃.10 secs. Temperature ( ℃ ) 50sec max. 150 70sec max. 100 50 0 AR-001A 230℃ 200 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL PAGE: 2 REF : PROD. NAME ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅴ﹒ ELECTRICAL CHARACTERISTICS: DWG No. Inductance ( μH ) Q ref. SU20131R0YP□-□□□ SU20132R2YP□-□□□ SU20133R3YP□-□□□ SU20134R7YP□-□□□ SU20136R8YP□-□□□ SU2013100YP□-□□□ SU2013150YP□-□□□ SU2013220YP□-□□□ SU2013330YP□-□□□ SU2013470YP□-□□□ 1.0 ± 30 % 2.2 ± 30 % 3.3 ± 30 % 4.7 ± 30 % 6.8 ± 30 % 10.0 ± 30 % 15.0 ± 30 % 22.0 ± 30 % 33.0 ± 30 % 47.0 ± 30 % 9 10 10 10 10 12 12 12 12 14 1). Test Freq. SRF ( MHz ) ( MHz ) typ. 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 180 100 80 72 60 40 30 25 20 15 RDC ( mΩ ) max. typ. 48 90 105 165 255 395 650 950 1400 2200 65 120 135 220 330 520 850 1250 1820 2860 Irms Isat ( mA ) ( mA ) Marking typ. typ. 2200 1450 1000 900 800 670 460 400 300 250 :Packaging Information… A:Bulk B:Taping Reel □□□ 2)."":Reference code 3). Inductance Test Freq. :100KHz /0.1V 4). Irms base on Temp. rise 40℃ typ. 5). Isat base on △L / L0A=35% typ. @ Inductance VS. DC Current Curve 10 2 7 5 470 3 Inductance(uH) 2 10 1 7 5 100 3 2 10 0 7 5 1R0 3 2 10 -1 10 -2 2 3 5 7 10 -1 2 3 5 7 10 0 DC Current (A) AR-001A 2 3 5 7 10 1 1600 950 860 750 600 450 400 350 250 230 A C E F G H I J K L SPECIFICATION FOR APPROVAL PAGE: 3 REF : PROD. NAME ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅵ﹒PACKAGING INFORMATION: ( 1 ) Configuration T Cover Tape N B A 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D 4 m/m P:8 m/m End Start Leader no component 200 m/m min. Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 07 - 12 178 B 21±0.8 C D 13 12 G 14 +0 N 50 -0 T 16.5 ( 3 ) Q'TY & G.W. Per package Inner : Reel Series SU2013 AR-001A Q'TY (pcs) 1,200 G.W. (gw) 120 Outer : Carton Style 07 - 12 Q'TY (pcs) 48,000 G.W. (Kg) Size (cm) 4.8 42 x 41 x 24 SPECIFICATION FOR APPROVAL PAGE: 4 REF : PROD. NAME SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅶ﹒DWGING NUMBER EXPRESSION: S U 2 0 1 3 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1:Product Classification P:Lead Free Standard products comply with RoHS' requirements 1 ~ 9:Lead Free Special products comply with RoHS' requirements Appendix code 2:Package Information Code AR-001A Inner package A T.B.D. B T / R ( Reel package ) Inner package Q'TY T.B.D. 1,200 pcs Remark SPECIFICATION FOR APPROVAL PAGE: 5 REF : PROD. NAME SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅷ﹒RELIABILITY TEST: Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 95% of the terminal electrode Shall be covered With fresh solder. Preheat : 155℃ / 4 hours. Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5℃ Flux : Rosin Dip time : 5±0.5 seconds Electrical oharacteristics shall not change more than ±20% Room temp. 15 minutes -40 ℃ 30 minutes Room temp. 15 minutes +105 ℃ Total : 50 cycles Humidity test Temperature : 40±2℃ Humidity : 90±5% Time : 1000 hours High temp. Resistance test Temperature : 105±5℃ Applied current : Per spec. Time : 96 hours AR-001A 30 minutes SPECIFICATION FOR APPROVAL REF : PROD. NAME PAGE: 6 SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU2013□□□□P□-□□□ ABC'S ITEM NO. Ⅸ﹒UL CARD: August 27, 1999 OBMW2 Magnet Wire-Comporent E143312 ELEKTRISOLA (MALAYSLA) SDN BHD IALAN DAMN SATU IANDA BAIK 28750 BENTONG, PAHANG DARUL MAKMUR MALAYSIA Coating Type Mtl Dsg Mark Dsg BC Estersol 160 E180 Amldester 200 Polysol-N 155 A200 PN155 Polyesterimide (solderable) Polyesterimide Polyurechane Polysol 155 P155 Polyurechane Polysol 155g Polysol 155p Polysol 160 Polysol 180 Polysol 170 Polysol-N 180 Pg155 Pp155,Gp155 P160 P180 P170 or G170 PN180 Polyurechane Polyurechane Polyurechane Polyurechane Polyurechane Polyurechane OC ____ ____ Nylon ____ ____ ____ ____ ____ ____ Nylon ANSI Typ Temp Class MW-77 180 MW-74 MW-80, MW-28 MW-79, MW-79 MW-79 MW-79 MW-79 MW-79 MW-79 ____ 200 155, 100 155, 130 130 155 155 155 156 180 Marking:Dompany name/nateriel designation or marked designation and factory identification on package ok reel See General Information preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. AR-001A