104-AIO16-16W PC/104 16-Bit High Speed MULTIFUNCTION ANALOG I/O K E Y F E AT U R E S : FAC T ORY OP T IONS: ■ 500kHz sampling rate supported by wide data bus ■ FIFO up to 64K samples ■ 16 single-ended or 8 differential inputs ■ Programmable amplifier with gains of 1, 10, 100, and 1000 ■ 11 software/hardware selectable ranges ■ +5VDC only operation ■ Unique channel by channel programmable gain of 1, 2, 5, and 10 ■ 0 to 70°C and -40 to +85°C versions available ■ 1024 sample data FIFO for A/D ■ Auto calibration ■ Two 12-bit D/A outputs and 16 digital I/O The 104-AIO16-16W is a high-speed, 16bit resolution board which provides speeds up to 500kHz for 16 single-ended or eight true differential analog input channels. This multifunction board features an excellent price/performance value for precision PC/104-based data acquisition, control, or signal analysis of standalone environmental test stations, compact production test equipment, portable testers, avionics and other applications. The 104-AIO16-16W features 11 standard analog input ranges and a filtered, extremely quiet front end. The module also offers on-board hardware oversampling for additional noise reduction. In addition to direct data transfers, the board’s ability to trigger the A/D in real time assures synchronized sampling that is unaffected by other computer operations—an essential requirement for signal, vibration and transient analysis where high data rates must be sustained for short periods of time. The 500kHz sampling rate is supported by a 1024-sample FIFO (optional, 2, 4, 32, and 64K samples) for reducing processor overhead. Sixteen parallel bits of digital I/O and two 12-bit D/A outputs allow for a complete, high-performance data acquisition solution. S O F T WA R E The 104-AIO16-16W is supported for use in most operating systems and includes a free DOS, Linux and Windows 95/98/Me/ NT/ 2000/XP/2003 compatible software package. This contains sample programs and source code in "C" and Pascal for DOS, and Visual Basic, Delphi, C++ Builder, and Visual C++ for Windows. Also included is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from any user level via an open source kernel driver. Advanced Digital Logic, Inc. 4411 Morena Blvd. Suite 101 San Diego, CA 92117 Email: [email protected] Website: www.adlogic-pc104.com Tel: (858) 490-0597 Fax: (858) 490-0599 104- AI O16 -16W 16-Bit High Speed PC/104 MULTIFUNCTION ANALOG I/O Block Diagram & Pin Configuration ���������� ����������������� ����������������� ���� ����������������� ����������������� ���� ����������������� ����������������� ���� ����������������� ����������������� ���� ����������������� ����� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ����������������� ����������������� ���� ������������������ ������������������ ���� ������������������ ������������������ ���� ������������������ ������������������ ���� ����� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ����� ����� ����� ����� ����� ����� �� ��� ����������� ��������� �������� �������� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Specifications A/D Digit al I/O Inputs 16 single-ended or 8 differential Number of I/O 16, programmable as inputs or outputs in groups of 8 Resolution 16-bit resolution Input voltage Bipolar ranges ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V Logic low: 0.0V min, 0.8V max; Logic high: 2.0V min, 5.0V max Unipolar ranges 0-1V, 0-2V, 0-4V, 0-5V, 0-10V Input current ±1µA max Sampling rate 500kHz Outputs Type Logic low: 0.0V min, 0.55V max; Logic high: 2.4V min, 5.0V max Successive approximation Overvoltage protection -37V to +52V Output current Logic low: 24mA max sink; Logic high: 24mA max source Nonlinearity ±4 LSB, monotonic A/D FIFO 1024 16-bit wide samples (optional 2, 4, 32, and 64K) Count er/T imer s Calibration Offset and gain values stored in EEPROM Type Trigger Source Software selectable: external trigger, programmable timer, program command, A/D start, single scan start A/D Pacer clock 16 or 32-bit Clock Frequency 10MHz D/A 82C54 Gener al Outputs 2 Resolution 12-bit resolution Ranges 0-5V, 0-10V Power required +5V at 190mA typ (using optional DC/DC converter) Relative accuracy ±2 LSB Diff. Nonlinearity ±0.2 LSB Settling time/Update rate 8µs/100kHz Output current 5mA Calibration Gain values stored in EEPROM Power required (using ±12V and +5V) +12VDC - 25mA typical, -12VDC - 25mA typical, +5VDC - 65mA typical Operating Temperature 0 to +70°C, optional -40 to +85°C Storage Temperature -50 to +120°C Humidity 5% to 90% RH, non-condensing Ordering Guide 104-AIO16-16W 16-bit, High-Speed, 16-channel A/D with 12-bit D/A Advanced Digital Logic, Inc. 4411 Morena Blvd. Suite 101 San Diego, CA 92117 Email: [email protected] Website: www.adlogic-pc104.com Tel: (858) 490-0597 Fax: (858) 490-0599 © Copyright 2006 Advanced Digital Logic, Inc. Specifications subject to change without notice.