ADAM-5017UH ADAM-5018 ADAM-5018P RoHS ADAM-5017UH 8-ch Ultra High Speed Analog Input Module 7-ch Thermocouple Input Module 7-ch Thermocouple Input Module with Independent Input Range RoHS ADAM-5018 COMPLIANT 2002/95/EC COMPLIANT 2002/95/EC RoHS ADAM-5018P COMPLIANT 2002/95/EC Specifications Specifications Specifications General General General Certifications Connectors Certifications Connectors Certifications Connectors CE 1 x Plug-in screw terminal (# 14 ~ 22 AWG) Power Consumption 2.2 W (max.) Analog Input Accuracy ±0.1% or better 200 kHz Bandwidth 8 differential Channels Differential Non-linear ±1 LSB Voltage: 2 MΩ Input Impedance Current: 120Ω (Build-in 12Ω. register for Current Input) Integral Non-linear ±1 LSB mV, V, mA Input Type ±10 V, +0 ~ 10 V, Input Range 0 ~ 20 mA, +4 ~ 20 mA Configured by User Low pass filter 12-bit Resolution Depends on base unit Sampling Rate ADAM-5000/485 & 5000E: 100 Samples/sec max (Total): one ADAM-5017UH installed ADAM-5000/TCP: 100 Samples/sec max (Total) :one ADAM-5017UH installed ADAM-5510 : 200K Samples/sec max (Single Channel): one ADAM-5017UH installed ADAM-5550 : 1K Samples/sec per channel: one ADAM-5017UH installed *Depending on the performance of client server or controller Signal Input 200 kHz for both voltage and current inputs Bandwidth Protection Isolation Voltage 3,000 VDC Note: 1) The voltage difference between any two pins must not exceed 15 V 2) Distinct range settings allowed on each channel Note: Not support ADAM-5510KW series CE, FM 1 x Plug-in screw terminal (# 14 ~ 22 AWG) Power Consumption 0.63 W (max.) Accuracy Bandwidth ±0.1% or better 13.1 Hz @ 50 Hz 15.72 Hz @ 60 Hz 7 differential Channels 92 dB min CMR @ 50/60 Hz 2 MΩ Input Impedance ±15 mV, ±50 mV, ±100 mV, lnput Range ±500 mV, ±1 V, ±2.5 V, ±20 mA mV, V, mA,thermocouple lnput Type 16-bit Resolution 10 samples/sec. (total) Sampling Rate ±25 PPM/ ° C Span Drift Zero Drift ±6 μV/ ° C T/C Type and Temperature Range J 0 ° ~ 760° C K 0° ~ 1,370° C T -100° ~ 400° C E 0° ~ 1,000° C R 500° ~ 1,750° C S 500° ~ 1,750° C B 500° ~ 1,800° C Protection Fault and Overvoltage Protection Isolation Voltage Withstands overvoltage up to ±35 V 3,000 VDC Ordering Information ADAM-5018 Ordering Information ADAM-5017UH Thermocouple Input Thermocouple Input 8-ch Ultra High Speed Analog Input Module PC-based Controllers & I/O Modules CE 1 x Plug-in screw terminal (# 14 ~ 22 AWG) Power Consumption 0.63 W (max.) 7-ch Thermocouple Input Module Accuracy Bandwidth ±0.1% or better 13.1 Hz @ 50 Hz 15.72 Hz @ 60 Hz Channels 7 differential with Independent Input Range CMR @ 50/60 Hz 92 dB min Input Impedance 20 MΩ. (Build-in 120 Ω Register for Current Input) lnput Range and Types Thermocouple J 0 ~ 760° C K 0 ~ 1,370° C T -100 ~ 400° C E 0 ~ 1,000° C R 500 ~ 1,750° C S 500 ~ 1,750° C B 500 ~ 1,800° C Current mode ±20 mA, 4 ~ 20 mA Voltage ±15 mV (0.2%), ±50 mV, ±100 mV, ±500 mV ±1 V, ±2.5 V Resolution 16-bit Sampling Rate 10 samples/sec. (total) Span Drift ±25 PPM/°C Zero Drift ±6 μV/°C High Common Mode 200 VDC Protection Fault and Withstands overvoltage up Overvoltage to ±35 V Protection Isolation Voltage 3,000 VDC Filter function Yes Built-in TVS/ESD Protection Note: Not support ADAM-5510KW series Ordering Information ADAM-5018P 7-ch Thermo. Input Module w/ Ind. Input Range