ADVANTECH EKI

EKI-6311G
802.11 b/g Wireless Access
Point/Client Bridge
Features
NEW
 IEEE 802.11 b/g compatible
 IEEE 802.3 af Power over Ethernet (PoE) support
 High speed data rates (up to 54 Mbps)  Output power up to 19dBm (80mW)
 Point-to-Point, Point-to-Multipoint wireless connectivity
 WEP/WPA/WPA2/ IEEE 802.1 x authentication support  WDS (Wireless Distribution System) support
 IP65 compliance protects against dust and water
 Multi-SSID (up to 4 SSID) support
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-6311G features enhanced wireless transmission capabilities to provide a reliable wireless environment for industrial building systems. Moreover, a detachable antenna can
collocate with any high gain antenna to enhance wireless connections even further. To protect wireless connections, EKI-6311G can encrypt transmissions through 64/128-bit WEP
data encryption and also supports WPA2/WPA/802.1x for powerful security authentication.
Specifications
Networking Information
 Topology
 Operation Mode
General
 Chipset  Data Rates
 Standards
 Certifications Atheros solution
802.11 b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE802.11 b/g, IEEE802.1x, IEEE802.3, IEEE802.3u
IP65, FCC Part 15B
CE EN60950/EN300328/EN301489-1-17
 Interface
 Security
RF Information
 Frequency Band
2.400 ~ 2.484 GHz
 Media Access Protocol Carrier sense multiple access with collision avoidance
(CSMA/CA)
 Modulation Technology
802.11b:
Direct-Sequence Spread Spectrum (DSSS)
DBPSK @ 1Mbps
DQPSK @ 2Mbps
CCK @ 5.5 and 11Mbps
802.11g:
Orthogonal Frequency Division Multiplexing (OFDM)
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
6-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
 Receive Sensitivity
2.412~2.472G (IEEE802.11g)
-92dBm@6Mbps
-76dBm@54Mbps
2.412 ~ 2.472G (IEEE802.11b)
-92dBm@11Mbps
-96dBm@1Mbps
 Transmit Output Power IEEE802.11g: 14dBm+-2
(Typical) IEEE802.11b: 17dBm+-2
 Antennas
5dBi dipole antenna x 2 (external)
 RF Connector
SMA female
Power
 Power Consumption  Power Input Max. 12 W
Active Ethernet (Power over Ethernet): 48 VDC/0.375A
Industrial Ethernet Solutions
 IP Auto-configuration
Infrastructure, Ad-hoc
Point-to-Point/ Point-to-Multipoint AP/Client Bridge/
WDS Repeater
1 x 10/100 Mbps RJ-45 LAN Port (Auto Switch)
IEEE802.1x / RADIUS Client (EAP-MD5/TLS/TTLS,
PEAP) Support in AP Mode
IEEE802.1x Supplicant (EAP-MD5/TLS/TTLS, PEAP)
support in Client Bridge Mode
WEP 64/128 bits
WPA/WPA2 Personal
PSK (Pre Share Key) with TKIP/AES
WPA/WPA2 Enterprise
EAP-MD5/TLS/TTLS authenticator with TKIP/AES
MAC address filtering
Layer2 Isolation
VLAN tunneling support
Hide SSID in beacons
DHCP client/server
Management
 Remote Configuration Web-based configuration (HTTP)
Telnet configuration
 Firmware Upgrade
Upgrade firmware via web-browser
Physical
 Dimensions (L x W x H) 209.1 x 165.4 x 61.5 mm
 Weight
500g
Environment
 Operating Temperature -10 ~ 60° C (14 ~ 158° F)
 Storing Temperature - 40 ~ 85° C (-40 ~ 185° F)
 Humidity 5 ~ 95% (non-condensing)
Ordering Information
 EKI-6311G
 EKI-6311G/EU
802.11b/g Wireless AP/Client Bridge (US)
802.11b/g Wireless AP/Client Bridge (EU)