RoHS PCI60 Power Chip Inductors Dimensions: 0.730 Max (18.54) 0.500 (12.70) 0.100 (2.54) 0.280 Max (7.11) 1st 0.600 (15.24) Max Inches (mm) 2nd 0.110 (2.79) 3rd 0.100 (2.54) 0.118 (3.00) 0.490 (12.45) * Notice of marking change see “Marking” below. Features Allied Part Number Inductance (µh) Tolerance (%) SRF (MHz) TYP DCR Max. (Ω) Isat (A) Irms (A) PCI60-1R0M-RC 1.0 20 80 .011 20 8.6 PCI60-2R2M-RC 2.2 20 80 .014 16 7.1 PCI60-3R3M-RC 3.3 20 60 .016 14 6.2 PCI60-5R6M-RC 5.6 20 40 .022 12 5.3 PCI60-100M-RC 10 20 30 .032 10 4.3 PCI60-150M-RC 15 20 22 .036 8.0 4.0 PCI60-220M-RC 22 20 20 .047 7.0 3.5 PCI60-330M-RC 33 20 15 .066 5.5 3.0 PCI60-470M-RC 47 20 9 .087 4.5 2.6 PCI60-680M-RC 68 20 8 .13 3.5 2.3 PCI60-101M-RC 100 20 7 .19 3.0 1.8 PCI60-151M-RC 150 20 6 .25 2.6 1.5 PCI60-221M-RC 220 20 5 .38 2.4 1.2 PCI60-331M-RC 330 20 4 .56 1.9 1.0 Marking: Notice: We will be changing our marking PCI60-471M-RC 470 20 3 .85 1.4 0.82 • High saturation current rating up to 20 Amps • Very low DCR for low power loss • Designed with high heat resistant materials for reflow operation • Wrap around terminals for excellent solder quality and inspection • Flat top for pick and place assembly • Non standard values available Electrical Inductance Range: 4.7µh to 1000µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to + 85ºC Inductance Drop: 20% typical at the rated Isat.0 to 2000) x 10 -6°C. Temperature Rise: ∆T=40ºC rise typical at Irms. Physical system to the 4 character EIA code for inductance and tolerance. For example: “101K” for 100µh 10%. PCI60-681M-RC 680 20 2.5 1.20 1.2 0.72 Packaging: 250 pieces per 13 inch reel. PCI60-102M-RC 1000 20 2.0 1.80 1.0 0.56 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/23/09 www.alliedcomponents.com