RoHS Power Chip Shielded Inductors Tolerance (%) Dimensions: Inches (mm) Test Freq. KHz, 1V (Ω) Max. Allied Part Number Inductance (µh) RDC Rated Current (A) PCS5D18-1R0T-RC 1.0 30 10 .038 2.80 PCS5D18-1R5T-RC 1.5 30 10 .038 2.50 PCS5D18-3R3T-RC 3.3 30 10 .056 1.90 PCS5D18-4R1T-RC 4.1 30 10 .057 1.95 PCS5D18-4R7T-RC 4.7 30 10 .076 1.60 PCS5D18-5R4T-RC 5.4 30 10 .076 1.60 PCS5D18-6R2T-RC 6.2 30 10 .096 1.40 PCS5D18-6R8T-RC 6.8 30 10 .100 1.35 PCS5D18-8R9T-RC 8.9 30 10 .116 1.25 PCS5D18-100T-RC 10 30 10 .124 1.20 PCS5D18-120T-RC 12 30 10 .153 1.10 PCS5D18-150T-RC 15 30 10 .196 0.97 PCS5D18-180T-RC 18 30 10 .210 0.85 PCS5D18-220T-RC 22 30 10 .290 0.80 PCS5D18-270T-RC 27 30 10 .330 0.75 PCS5D18-330T-RC 33 30 10 .386 0.65 PCS5D18-390T-RC 39 30 10 .520 0.57 PCS5D18-470T-RC 47 30 10 .595 0.54 PCS5D18-560T-RC 56 30 10 .665 0.50 PCS5D18-680T-RC 68 30 10 .840 0.43 PCS5D18-820T-RC 82 30 10 .978 0.41 PCS5D18-101T-RC 100 30 10 1.20 0.36 PCS5D18 Features • Shielded SMD Power Inductor • Available in magnetically shielded • Low DC resistance • Ideal for DC-DC converter applications Electrical Inductance Range: 1µh to 100µh Tolerance: 30% over entire range Also, available in tighter tolerances Operating Temp: -30ºC ~ +100ºC Rated Current: Current at which inductance drop by 35% of intial value or ∆ T=40ºC lower, whichever is lower Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec. +/- 1 sec. Test Equipment (L): HP4284A LF Impedance Analyzer (RDC): Chen Hwa 502BC Rated Current: HP4284+HP42841A or Chen Hwa 1061 + Chen Hwa 301A Physical Packaging: 2000 pieces per 13 inch reel. Marking: EIA Inductance Code All specifications subject to change wtihout notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/30/08 15 www.alliedcomponents.com