Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series 9.5mm width potentiometer ideal for various types of control. Rotary Potentiometers Typical Specifications Items Specifications Total resistance tolerance ±20% Maximum operating voltage 50V AC ,10V DC Slide Potentiometers 300±5° (For shaft movable type, 300 +10° ) − 5° Total rotational angle Rotational torque 2 to 25mN・m Operating life 15,000cycles Operating temperature range − 20℃ to +70℃ Metal Shaft Product Line Single-shaft without switch type Number of resistor elements Mounting direction Shaft type Length of the shaft (mm) Center detent Without Total resistance (kΩ) Resistance taper 10 15A RK097111080J 20 1B RK0971110909 Minimum order unit (pcs.) 50 15 Drawing No. Insulated Shaft Knob Operating RK097111050B 15A With Products No. 1,200 RK0971110D7F 10 RK097111020N 50 1B Single-unit Horizontal type Without 100 RK09711100WY 1 Flat 15A RK097111080R 10 RK0971110D88 With 20 50 1B RK09711100F8 800 100 RK09711100Q2 Without 25 15A RK097111091M 1B RK0971110D57 10 Note Products other than those listed in above products are also available. Please contact us for details. 327 Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series Product Line Single-shaft without switch type Number of resistor elements Mounting direction Shaft type Length of the shaft (mm) Rotary Potentiometers Slide Potentiometers Center detent Total resistance (kΩ) With 20 20 Dual-unit for tone Resistance taper 25 Drawing No. RK0971210Z2M 800 1B RK09712100AV RK0971210097 15A 15 Flat Products No. 1B 50 Horizontal type Minimum order unit (pcs.) RK09712200MC 2 1,200 Without 10 Dual-unit for vol. 20 3B RK09712200MY 15A RK09712200HA 3B 20 15A Total resistance (kΩ) Resistance taper 800 RK097122008T RK09712200MT Single-shaft with rotary switch type Metal Shaft Insulated Shaft Knob Operating Number of resistor elements Mounting direction Shaft type Length of the shaft (mm) Center detent Minimum order unit (pcs.) 20 Products No. Drawing No. RK0971111Z0P 15 50 RK0971111Z32 15A Single-unit 3 Horizontal type RK09711110AL Flat 20 700 Without 10 1B RK09711110EL 15 Dual-unit for vol. RK0971221Z05 3B 20 4 RK0971221Z11 20 Single-shaft push-on push-off switch type Number of resistor elements Mounting direction Shaft type Length of the shaft (mm) Center detent Total resistance (kΩ) Resistance taper Minimum order unit (pcs.) 20 Products No. Drawing No. RK097111201V 15A Single-unit 700 Horizontal type Flat 5 RK097111202Q 1B Without 15 Dual-unit for tone RK097111202P 10 25 RK097121200C 15A 600 20 50 3B Total resistance (kΩ) Resistance taper 6 RK097122200G Single-shaft momentary push(0.5mm travel)switch type Number of resistor elements Mounting direction Shaft type Single-unit Dual-unit for tone Dual-unit for vol. Horizontal type Length of the shaft (mm) Center detent 15 With 20 Without 3B 10 Flat Minimum order unit (pcs.) 1B 700 Products No. Drawing No. RK0971114D0B 7 RK0971214Z06 8 15A RK0971224Z01 Note Products other than those listed in above products are also available. Please contact us for details. Refer to P.333, 334, 335 for product varieties. 328 Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series Product Line Single-shaft momentary push(1.5mm travel)switch type Number of resistor elements Mounting direction Shaft type Single-unit Horizontal type Flat Length of the shaft (mm) Center detent Total resistance (kΩ) Without 10 Minimum order unit (pcs.) Resistance taper 20 Products No. RK0971114Z07 1B 700 9 RK0971114Z0T 15A 25 Drawing No. Rotary Potentiometers Slide Potentiometers Single-shaft with push-lock mechanism type Number of resistor elements Mounting direction Shaft type Length of the shaft (mm) Center detent Total resistance (kΩ) Resistance taper 10 1B RK097111T065 15A RK097111TZ17 Without Minimum order unit (pcs.) Products No. Drawing No. 100 Single-unit 700 Horizontal type RK097111T064 10 Flat 10 RK097111TD2M 25 1B With Dual-unit for tone 100 RK097111TD44 Metal Shaft RK097121TD57 10 600 15A Dual-unit for vol RK097122T017 11 Without 50 3B RK097122TZ0A Insulated Shaft Knob Operating Single-shaft, dual-unit with push-lock mechanism and pull-lock mechanism type Number of Mounting resistor elements direction Singleunit Mechanism specifications Horizontal The pull lock section type Shaft type Length of the shaft (mm) Center detent Total resistance (kΩ) Resistance taper Minimum order unit (pcs.) Products No. Drawing No. Flat 30 With 50 1B 400 RK098122TE04 12 Center detent Total resistance (kΩ) Resistance taper Minimum order unit (pcs.) Products No. Drawing No. RK0972210C07 13 The normal section Dual-shaft, dual-unit without switch type Number of Mounting resistor elements direction Singleunit Horizontal type shaft Shaft type Length of the shaft (mm) The outer shaft Slotted 10 The inner shaft Flat 20 The outer shaft Slotted 15 1B 15A Without The inner shaft Flat 25 The outer shaft Slotted 15 The inner shaft Flat 25 10 700 RK097221005C 14 15C RK097221004C Note Products other than those listed in above products are also available. Please contact us for details. Refer to P.333, 334, 335 for product varieties. Refer to P.363 for attached parts. 329 Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series Dimensions Photo 25 10 12 20 7 12 R 1 C1 R1 15 5 7 × Slide Potentiometers L1 LB R Single-shaft, single-unit RK0971110 Rotary Potentiometers Style 4.5 No. Unit:mm PC board mounting hole dimensions (Viewed from mounting side) R 2 L1 LB R 15 5 7 G 20 7 12 G 3 R ! Single-shaft, single-unit with rotary switch RK0971111-5R1211 Knob Operating Insulated Shaft 25 10 12 20 7 12 15 5 7 Metal Shaft L1 LB R Single-shaft, dual-unit RK0971210(For tone) RK0971220(For vol.) 15 5 7 20 7 12 R 4 G ! 330 L1 LB R Single-shaft, dual-unit with rotary switch RK0971221-5R1211(For vol.) Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series Dimensions No. Unit:mm Photo Single-shaft, single-unit with push-on push-off switch RK0971112-5R2412 PC board mounting hole dimensions (Viewed from mounting side) Style L1 LB R 20 7 10 Rotary Potentiometers 25 10 12 5 G ! " L1 LB R 15 5 7 C F #$ G 6 ! " Single-shaft, single-unit with momentary push switch travel 0.5mm RK0971114-5R4211 + . Metal Shaft Insulated Shaft Knob Operating ! " G 8 Single-shaft, dual-unit with momentary push switch travel 0.5mm RK0971214-5R4211(For tone) RK0971224-5R4211(For vol.) × 7 ) , R # A D 20 7 10 Single-shaft, dual-unit with push-on push-off switch RK0971212-5R2412(For tone) RK0971222-5R2412(For vol.) Slide Potentiometers R # #$ ! " 331 Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged type RK097/RK098 Series Dimensions No. Unit:mm Photo Single-shaft, single-unit with momentary push switch travel 1.5mm RK0971114-5R4611 Rotary Potentiometers Slide Potentiometers PC board mounting hole dimensions (Viewed from mounting side) Style L1 LB R 20 7 10 25 10 12 R #$ 5 9 Mounting surface 5 5 # G 5-ø1 holes ! " Single-shaft, single-unit with push-lock mechanism RK097111T Insulated Shaft G 10 Knob Operating Metal Shaft !"# $# % & '!$$# G 11 Single-shaft, dual-unit with push-lock mechanism RK097121T(For tone) RK097122T(For vol.) !"# $# % & '!$$# 332 × () ! "# #$""% 12 ± & Single-shaft, dual-unit with push-lock mechanism and pull-lock mechanism RK098122T Metal Shaft Potentiometer 9mm Size Metal Shaft Multi-ganged Type RK097/RK098 Series Dimensions Unit:mm No. Photo PC board mounting hole dimensions (Viewed from mounting side) Style Dual-shaft, dual-unit RK0972210 Rotary Potentiometers Slide Potentiometers G 13 Dual-shaft, dual-unit RK0972210 Metal Shaft G Insulated Shaft Knob Operating 14 Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Dimensions of Terminal Unit:mm ※ !" ※ #! $ % & % & ' ※ ( ! % + !& & + !& & ) * ! ! Dimensions of Bushings Unit:mm M6 M7 M9 Y Y X X x 8 x 6 Bushing 0.8 Dimensions 0.8 M6G0.75 Y M7G0.75 Applications For single-shaft only A Y 2 M9G0.75 Detail A For single and dual-shaft For dual-shaft only 333 9mm Size Metal Shaft Multi-ganged Type Potentiometer Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Total Resistance Variety Rotary Potentiometers Slide Potentiometers 10 20 50 100 15A 1B 3B 15C Total resistance(kΩ) Resistance Taper Resistance taper Note Can be fitted with center-taps. Single-shaft Dimension Flat type Unit:mm Style(Shaft diameter:φ6) Insulated Shaft Knob Operating R Metal Shaft Detail dimensions 5 7 20 7 12(10) 25 10 12 30 10 12 Detail dimensions R LB Models in parenthesis apply to those with a push-on switch and those with a push-on, push-off switch. G Style(Shaft diameter:φ3.5) R L1 15 R L1 LB 15 5 7 20 7 12(10) 25 10 12 30 10 12 Models in parenthesis apply to those with a push-on switch and those with a push-on, push-off switch. G Dimension of Dual-shaft Type Applications Both switchless and rotary switch models are available. Flat type for inner shaft, slotted type for outer shaft Style(Inner-shaft:φ6 Unit:mm Outer-shaft:φ8) R G Style(Inner-shaft:φ3.5 Detail dimensions R L1 L2 LB R1 R2 20 10 5 8 4 25 15 7 8 5 30 20 10 8 5 35 25 10 8 5 Outer-shaft:φ6) R R G Note marked are specifications recommended by ALPS. 334 Detail dimensions L1 L2 LB R1 R2 20 10 5 8 4 25 15 7 8 5 30 20 10 8 5 35 25 10 8 5 Refer to P.338, 502 for resistance taper. 9mm Size Metal Shaft Multi-ganged Type Potentiometer Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Shaft Dimensions of with Push-lock Mechanism Rotary Potentiometers Detail dimensions Unit:mm R A R 10 (5.7) 4.5 10 (10.7) 7 10 (15.7) 12 ※L1 LB 25 30 35 Slide Potentiometers ※Dimensions in unlocked state ! G Example of uses Metal Shaft Insulated Shaft Knob Operating Shaft Dimensions of with Push-lock Mechanism and with Pull-lock Mechanism Detail dimensions R G Unit:mm A R 10 (5.7) 4.5 10 (10.7) 7 10 (15.7) 12 ※L1 LB 25 30 35 ※Dimensions in unlocked state ! "# #$ "" % Example of uses Note marked are specifications recommended by ALPS. 335 9mm Size Metal Shaft Multi-ganged Type Potentiometer Specification for Switches Mechanical Characteristics Switch type Rotary Potentiometers Slide Potentiometers 5R1211 Pole-position Rating SPST 3A 16V DC Rotary switch 5R1212 Operating force Changeover angle (travel) 50mN・m max. 50°max. 12±8N 1.5mm 4 +4 −2 N 0.5mm 5±2N 1.5mm 1A 16V DC SPDT Push-on Push-off switch Momentary push switch Metal Shaft 5R2412 3A 16V DC 5R2421 DPST 5R4211 SPST 0.5A 12V DC 5R4611 Electrical Characteristics Insulated Shaft Knob Operating Model Contact resistance Insulation resistance Voltage proof 5R1211, 5R1212 5R2412, 5R2421 5R4211, 5R4611 100mΩfor initial period, 200mΩafter operating life 100MΩ min. Measured with a 250V DC insulation tester 300V AC 1 minute min. Durability Operating life under load 5R1211,5R1212 5R2412,5R2421 5R4211 The switch under a rated resistance load shall be subjected to a total of 10,000 cycles of operation at a speed of 600 to 1,000 cycles per hour. The contact resistance after testing should not exceed 200mΩ. 5R4611 The switch under a rated resistance load shall be subjected to a total of 20,000 cycles of operation at a speed of 600 to 1,000 cycles per hour. The contact resistance after testing should not exceed 200mΩ. Note The operating current should be 10mA or greater. 336 9mm Size Metal Shaft Multi-ganged Type Potentiometer Configuration Chart Bushing Outer-shaft control section Inner-shaft actuator Rotary Potentiometers Slide Potentiometers Single-unit Bal. Outer-shaft variety Dual-unit Single-unit Dual-unit Tone/Prefader Bal./Vol. Vol./Tone Metal Shaft Inner-shaft variety Insulated Shaft Normal Vol./Tone Pull Bal./Tone Knob Operating Pull operation Rotary switch With switch Push-on push-off switch 0.5mm travel Momentary push switch 1.5mm travel Note The single-shaft type product lineups are the same as those in the inner-shaft variety. 337 9mm Size Metal Shaft Multi-ganged Type Potentiometer Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample Part Number Rotary Potentiometers R K 0 9 7 1 1 1 0 F 1 5 C 0 B 1 0 3 Slide Potentiometers Model type Model type Code 111 Single-shaft single-unit 121 Single-shaft dual-unit for tone 122 Single-shaft dual-unit for vol. Switch specifications Code Switch specifications 0 Without switch Metal Shaft 1 With rotary switch 2 With push-on push-off switch Insulated Shaft 4 With momentary push switch(0.5mm travel) T With push-lock mechanism Knob Operating *Push on switch 1.5mm stroke is individually specified. Shaft type Code Shaft type F Flat(shaft diameter : 6) *Shaft diameter 3.5 is individually specified. Length of the shaft(L1) (mm) Code Length of the shaft Code Length of the shaft 15 15 25 25 20 20 30 30 Code Detent Code Detent C0 Without 11 11 C1 Center 31 31 Code Resistance taper Detent *The resistance taper for rotary switches are individually defined. B:For tone & general(model type : 111,121) V:For vol.(model type : 111,122) 60 50 40 30 10 0 Total resistance 10 Term."1" Total resistance Code J 70 20 A) 15 A( 20 30 40 50 100 Output volt.across term.2-3 100 (%) Input volt. across term. 1-3 G 15C 80 vo l.c on B tro (1 l)( B) 3B ) C 3B 90 V( 1B V 100 G 100 (%) B 15A Output volt.across term.1-2 A Resistance taper Input volt. across term. 1-3 Code J Resistance taper 60 Rotation travel (%) 70 J 80 90 100 Term."3" 90 80 70 60 50 40 30 C(1 5C ) 20 10 100 90 Term."1" 80 70 60 50 40 30 Rotation travel (%) J Total resistance (kΩ) Code 103 10 503 50 203 20 104 100 (kΩ) Notes 1. marked are specifications recommended by ALPS. 2. The above specification is only applicable to the one-shaft single-unit model and dual-unit ganged model. 338 20 10 0 Term."3" Metal Shaft Potentiometers List of Varieties 9mm size metal shaft snap-in Type Number of drive shafts 9mm size metal shaft multi-ganged Single-shaft Model 11mm size metal 11mm size metal 16mm size metal shaft low-profile shaft reflow shaft Dual-shaft RK0971 RK0981 RK09L1 Single-shaft RK0972 RK117111 RK1631□1 RK1631□A RK119 Rotary Potentiometers Slide Potentiometers Photo Fixing method of bushing The bushing can be screwed down Bushing screw clamp Bushing guide type Bushing screw clamp Terminal mounting Horizontal type Vertical type Horizontal type Vertical type Horizontal type Attached switch Without Push-on push-off switch※1 Momentary push switch Without Rotary switch ※1 Momentary push switch※1 Gang error applicable to Dual-unit parts for audio volume control purposes −40dB to 0dB 3dB max. −40dB to 0dB 3dB max. Solder heat resistance Manual soldering 350℃ max. 3s max. Dip soldering 260±5℃, 5±1s 350±10℃ 3 +10 s 350℃ max. 3s max. Motor terminal : 350$max 2s max. Metal Shaft Reflow soldering Please see P.347 Operating emperature range −10℃ to +70℃ −20℃ to +70℃ Rated power −30℃ to +70℃ −40℃ to +85℃ −10℃ to +70℃ 0.05W Electrical performance R≦10kΩ 10kΩ< R<50kΩ 50kΩ≦ R Residual resistance Maximum attenuation (Volume control) R≦10kΩ 50Ωmax. R≦10kΩ 20Ωmax. 10kΩ<R≦50kΩ 80Ωmax. 10kΩ<R≦50kΩ 30max. 50kΩ<R 50kΩ<R Nominal total resistance of 0.2% or less Nominal total resistance of 0.1% or less 20Ωmax. 30Ωmax. Nominal total resistance of 0.1% or less 5kΩ≦R< 10kΩ 10kΩ≦R< 50kΩ 50kΩ≦R<100kΩ 100kΩ≦R 100MΩ min. 250V DC 100MΩ min. 500V DC Voltage proof 300V AC for 1minute 500V AC for 1minute Mechanical Environmental performance performance 0.5N・m(With push-lock mechanism type: 0.4N·m) Push-pull strength Vibration Knob Operating 70dB min. 80dB min. 90dB min. 100dB min. Insulation resistance Stopper strength Insulated Shaft 80N max. 0.5N・m 0.9N・m 100N max. 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively −20℃±2℃ for 96h Cold −30±2℃ for 96h −40±2℃ for 240h −20±2 for 96h Dry heat 70±2℃ for 96h 85±2℃ for 240h 70±2℃ for 96h Damp heat 40±2℃, 90 to 95%RH for 96h 60±2℃, 90 to 95%RH for 240h 40±2℃, 90 to 95%RH for 96h 343 348 Page ページ 323 327 339 Push-on Switch Specifications Items RK097 RK117 Contact arrangement Travel(mm) Operating force(N) Rating Contact resistance Operating life RK119 Single pole and single throw(Push on) 0.5 4 +4 −2 1.5 0.5 5±2 6±3 0.5A 12V DC 1.5 0.5±0.3 5±2 3A 16V DC 1.5±0.5 4±2 0.1A 5V DC (1mA 5V DC min.ratings) 100mΩfor initial period;200mΩafter operating life 10,000 times 20,000 times 10,000 times 20,000 times min. min. min. min. 100,000 times min. 20,000 times min. ● Metal Shaft Potentiometers Attached Parts …………………………………………………………………………363 ● Metal Shaft Potentiometers Cautions ……………………………………………………………………………364, 365 Notes 1. ※1. For the switch attached, the single-shaft or inner shaft of the dual-shaft type can be chosen. 2. The operating temperature range for automotive applications can be raised upon request. Please contact us for requirements of this kind. 321 Metal Shaft Potentiometers Attached Parts The following parts are included with the product. Unit:mm Applicable products Bearing screw diameter Hexagonal nut Rotary Potentiometers Flat washer Slide Potentiometers 11 2 ø14 0.5 ø9.1 RK09L RK168 RK097 RK203 M9 M9G0.75 Metal Shaft 11 2 ø14 0.5 ø8.1 RK271 Insulated Shaft Knob Operating M8 M8G0.75 11 2 ø12 0.5 ø7.2 RK097 RK098 RK163 M7 M7G0.75 8 2 ø10 0.5 ø6.2 RK097 RK098 M6 M6G0.75 363