Slide Potentiometers for Fader Control of Mixers Motor-driven Master Type（Motor N Fader, Motor K Fader） RS□□N1□M/RSA0K1□V Series Provides a superior operational feel with high-speed tracking in motor drive mode. Typical Specifications Rotary Potentiometers Specifications Slide Potentiometers Items Motor N fader Motor K fader Total resistance tolerance ±20% Maximum operating voltage 10V DC, 200V AC（Travel：60mm） 10V DC, 500V AC （Travel：100mm） Operating force 0.3 to 1.3N Operating life 30,000cycles Operating temperature range General-use Rated voltage of motor Mixer Maximum current of motor 0.15 to 0.65N CP type : 300,000cycles −10℃ to ＋60℃ 10V DC 800mA or less（at 10V DC） Product Line Number of Travel resistor elements （mm） Type Lever type Total Length of resistance lever （kΩ） （mm） Resistance taper Terminal style Touch Minimum sense packing unit track （pcs.） Products No. Drawing No. Lead RS60N11M9A05 1 For PC board RS60N11M9A08 2 RSA0N11M9A06 3 For PC board RSA0N11M9A07 4 Connector RSA0K11V900S 5 60 Motor N Fadar 9-T （T-bar） Singleunit 100 Motor K Fadar （CP type） 8.2 10 1B Lead With 100 Note Products other than those listed in above products are also available. Please contact us for details. Refer to P.441 for product varieties. 438 Slide Potentiometers for Fader Control of Mixers Motor-driven Master Type（Motor N Fader, Motor K Fader） RS□□N1□M/RSA0K1□V Series Dimensions Unit:mm No. Style Rotary Potentiometers 54 52.5 2-M3 80 Slide Potentiometers 17 t=1.2 8.2 60 18.5 18.5 14.5 1.5 1.5 8 4 21 1 23T A B 1 8.2 0.5 Terminal No. General-use PC board mounting hole dimensions 2-M3 t=1.2 18.5 1.5 8 18.5 1.5 2-¿2 holes 36.65 43.65 6-¿1.5 holes A B 9.55 26 8.2 4 60 8.2 2 1 T 3 2 8 14.5 11.25 3.75 52.5 80 18 54 Mixer t=1.2 18.5 14.5 1.5 8 3 23T A B 1 8.2 4 439 Slide Potentiometers for Fader Control of Mixers Motor-driven Master Type（Motor N Fader, Motor K Fader） RS□□N1□M/RSA0K1□V Series Dimensions Unit:mm No. PC board mounting hole dimensions Style Rotary Potentiometers Slide Potentiometers 74 120 72.5 t=1.2 2-M3 1.5 18.5 26 8.2 4 100 8.2 4 1 T 3 2 General-use Mixer 3T side（3T側） 18.5 (14.5) Travel（移動距離） (8) 100±1 Mounting surface（取付面） 0.3 0.3 (12.4) 2.5X3=7.5 (75) Terminal No. 440 A 12.5 B 43.4 3 1 G 2 (37) (39.5) 20.3 (9.6) (13.7) (3.5) 39 7 33.5 5 1.5 1.2 2-(¿2) 1T side（1T側） 16 max. (2) 4 8.2 M3 2- 120±0.2 15 max. 83 2-¿2 holes 56.65 63.65 6-¿1.5 holes A B 8 1.5 8 11.25 3.75 18 18.5 14.5 29.55 Motor-driven Master Type Slide Potentiometer Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Products Specifications Travel Type Model （mm） 60 Touch sense track RS60N11M For PC board for auto dipping Lead Motor N fader Single-unit Terminal Rotary Potentiometers Slide Potentiometers RSA0N11M 100 Motor K fader CP type Fader Terminal：Connector Motor Terminal：Lead RSA0K11V Available RS60N12M 60 Printed wiring for auto dipping Lead Motor N fader Dual-unit （Servo＋ Audio track） RSA0N12M 100 Motor K fader CP type Fader Terminal：Connector Motor Terminal：Lead RSA0K12V Unit:mm Lever Types General-use 9-T （T-Bar） Configuration code Mixer t=1.2 18.5 14.5 Dimensions 1.5 8.2 4 8 Total Resistance Variety 50 10F Total resistance（kΩ） 100 250 F Motor K fader: Only 10kΩ Resistance Taper Servo Resistance taper 1B Audio 15A 1B 10A Circuit Diagram Motor Servo track ＋ − − ＋ Touch sense track ＋ ＋ Notes 1. marked are specifications recommended by ALPS. 2. Products other than those listed in the above list are also available. Please contact us for details. Refer to P.442, 443, 502 for resistance taper. 441 Motor-driven Master Type Slide Potentiometer（Motor N Fader） Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample Part Number Rotary Potentiometers R S 6 0 N 1 1 M T 0 B 1 0 3 Slide Potentiometers Travel (mm) 60 60 A0 100 Number of resistor elements Single-unit 1 Dual-unit 2 General-use Mixer Touch sense track Code Touch sense track T0 Without T1 With Resistance taper A 15A D 10A For dual-units specify the taper of the audio track. Servo track will always be 1B taper. 80 70 60 50 40 30 ) 1B 1B B 90 B( Resistance taper Output volt.across term.1-2 100 (%) J Input volt. across term. 1-3 G 100 Code A( 20 10 0 15 A) 0A) D(1 10 Term."1" 20 30 40 50 60 70 Rotation travel (%) Total resistance Code Total resistance（kΩ） 103 10 503 50 104 100 254 250 Note marked are specifications recommended by ALPS. 442 80 90 100 J Term."3" Motor-driven Master Type Slide Potentiometer（Motor K Fader） Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample part number R S A 0 K 1 2 V T 1 A 1 0 3 Rotary Potentiometers Slide Potentiometers Number of resistor elements Single-unit 1 Dual-unit 2 Type CP type V General-use Mixer Touch sense track Code Touch sense track T0 Without T1 With Resistance taper A 15A D 10A Appoint the taper of audio track in the case of dual-unit. Servo track is surely 1B taper. 80 70 60 50 40 30 ) 1B 1B B 90 B( Resistance taper Output volt.across term.1-2 100 (%) J Input volt. across term. 1-3 G 100 Code A( 20 10 0 15 A) 0A) D(1 10 Term."1" 20 30 40 50 60 70 Rotation travel (%) Total resistance Code Total resistance（kΩ） 103 10 80 90 100 J Term."3" Note marked are specifications recommended by ALPS. 443 Slide Potentiometers Control of Mixers List of Varieties Master type Low-profile master type Motor-driven master type Item RS□□K□□ RS□□N1 RS□□N11S RS6011□Y RSA0K1□V RS□□N1□M Rotary Potentiometers Slide Potentiometers Photo Outlined specifications 60 （RS60N11） 100 （RSA0N11） 60 （RS60N11S） 60（RS6011SY） 60 （RS60N11M） 100 （RSA0K11V） 60 （RS60N12） 100 （RSA0N11S） 60（RS6011DY） 100 （RSA0N11M） 100 （RSA0K12） 100 （RSA0N12） 60 （RS60K11） （RSA0K11） Travel（mm） 100 Number of resistor Single-unit Dual-unit Single-unit Dual-unit elements Single-unit （CP type） Dual-unit Single-unit Single-unit Electrical Performance Mechanical Performance Total resistance （kΩ） 10, 50, 100, 250 RS□□N1 ：10, 50, 100, 250 RS□□N11S：10, 50, 100, 250 RS6011□Y ：10, 20, 50 RS□□N1□M：10, 50, 100, 250 RSA0K1□V ：10 Resistance taper 15A, 1B RS□□N1 ：15A, 1B, 10A RS□□N1□S：15A, 1B, 10A RS6011□Y ：15A, 1B, 10A Single-unit：1B Dual-unit ：Servo 1B Audio 15A, 1B, 10A Standard：0.1 to 0.6N RS□□N1□ Single-unit：0.05 to 0.8N Dual-unit：0.05 to 0.9N RS6011□Y 0.1 to 2.0N RS□□N11S 0.05 to 0.8N Operating force Stopper strength RS□□N1□M 0.3 to 1.3N Mixer RSA0K1□V, Single-unit：0.15 to 0.65N 100N Lever pushpull strength 100N 50N Soldering Lever deviation （mm） ※Both Side 2（2×L） 25 Lever deviation 0.5mm max.（One side） Manual 手はんだ soldering 350℃ max. 3s max. Dip ディップはんだ soldering 260℃ max. 5s max. RS□□N1□M（Lead type）, RSA0K1□V：not available Environmental Performance Cold −30±2℃ for 96h Dry heat 70±2℃ for 240h Damp heat 40±2℃, 90 to 95％RH for 96h Page General-use 424 428 434 435 438 ● Slide Volume Control Operations Cautions ……………………………………………………………………………444, 445 Notes 1. Attenuation is specified for residual resistance. 2. "L" in the "Lever Wobble" column of the above table indicates the length of lever. 3. Products other than those listed in the above list are also available. Please contact us for details. 423