Slide Switch 0.7(H)mm, 1.5mm-travel Surface Mount Type SSAD Series Low-profile design of 6.7×3.2×0.7mm, height reduced by 50% (compared to our conventional models). Typical Specifications Detector Items Specifications Rating（max.） （min.） / （Resistive load） Contact resistance （Initial performance/After lifetime） Push 1mA 5V DC/50BA 3V DC Slide 100mΩmax./150mΩmax. Operating force Rotary 1（＋1, −0.5）N Without load Encoders 10,000cycles Operating life With load 10,000cycles（1mA 5V DC） Dual-in-line Package Type Product Line Travel Actuator （mm） direction Operating section Changeover Ground Location thickness Poles Positions Soldering timing terminal lug （mm） 0.65 1.5 Power Minimum order unit （pcs.） Without 1 Horizontal 2 Not specified With 0.85 Reflow Products No. Drawing No. CustomProducts SSAD120100 1 SSAD110100 2 20,000 With Small size General Use type Taping Specification(Taping Packaging) Big size General Use type Unit:mm Reel Size Number of packages（pcs.） ¿380 TACT SwitchTM 1 reel 1 case /Japan 1 case /export packing 5,000 10,000 20,000 Tape width （mm） Other Use type 16 17.4 Notes 1. Products other than those listed in the above chart are also available. Please contact us for details. 2. Please place purchase orders per minimum orders units (integer). 117 Slide Switch 0.7(H)mm, 1.5mm-travel Surface MountType SSAD Series Dimensions Unit:mm No. PC board mounting hole and land dimensions （Viewed from the direction A） Style Detector Terminal No.q 7.5 6.7 4.5 0.12 0.4 1.82 Slide 5.3 3.2 Rotary 0.6 4.7 3.7 Encoders 0.8 C 1 1 0. 0.9 1.5 2.3 1 Power Dual-in-line Package Type 6.5 A 8.5 TACT SwitchTM 0.65 0.7 Travel 1.5 0.05 CustomProducts 7.8 7.5 6.7 4.5 0.12 Terminal No.q 4.7 3.2 Big size General Use type 0.4 1.82 Small size General Use type PC board mounting face 5.3 0.6 3.7 2.3 0.8 2 1 1 1.3 Travel 6.5 A 2-0.8 0.05 2- C 0. 2 0.5 0.7 0.85 8.5 4 Circuit Diagram（Viewed from Direction A） 1 118 C 2 1.2 2 0.18 les ho .9 ø0 2- 4 0. C 1.5 1.5 Other Use type 0.18 Push Slide Switches List of Varieties Series SSAG SSAH SSAD SSSS8 SSSS7 SSSS2 SSSS9 SSSF SSSU SSSB SSST SSAA SSAC SSAB ※ ※ ※ ※ ※ Photo Detector Push Travel （mm） Outline Actuator specificat direction ions Number of poles W Dimensions （mm） 1.5 1.5 2 Horizontal Vertical Horizontal Horizontal 2 D 9.5 3 6.7 11.2 8.8 3.2 2.6 3 Vertical 1 2 4 13 14 2 16.5 24.5 1.5 Horizontal 1.9 2 Vertical Horizontal 2 4 1 1 2 2 1 29 13 12.4 9.5 9 Slide Rotary Encoders 4.7 7 9 4.3 6 5.5 4.2 Power 5 8.5 12 3.5 5 5.2 8.5 Dual-in-line Package Type 3.5 H Operating temperature range 1.15 0.9 0.7 –10℃ to ＋60℃ 10mA 5V DC Rating （max.） （ / min.） （Resistive load） 1mA 5V DC 1.4 2 –40℃ to ＋85℃ –10℃ to ＋60℃ TACT SwitchTM 0.3A 4V DC 0.3A 6V DC 0.1A 12V DC Electrical performance Mechanical performance Durability Cold Environmental performance –40±2℃ for 96h CustomProducts 30mΩ max. 25mΩ max. 20mΩ max. 70mΩ 25mΩ 100mΩ 30mΩ max. max. max. max. 100MΩ min. 100MΩ min. 100V DC 500V DC 500V AC 100V AC for for 1minute 1minute 100MΩ min. 500V DC 500V AC for 1minute 5N for 1minute 3N for 1minute 50N 30N 20N 10N 30N Static force 10N 10,000cycles 60mΩ max. 10,000cycles 45mΩ max. 10,000cycles 80mΩ max. 10,000cycles 65mΩ max. 5N for 1minute 30N Small size General Use type 40N Big size General Use type 5N 10N 10,000cycles 10,000cycles 10,000cycles 40mΩ max. 100mΩ max. 45mΩ max. 10,000cycles 5,000cycles 10,000cycles 10,000cycles 200mΩ max. 60mΩ max. 130mΩ max. 65mΩ max. 1,000cycles 60mΩ max. Other Use type 10,000cycles 80mΩ max. 85±2℃ for 96h 40±2℃, 90 to 95%RH for 96h Soldering 350±5℃ 3s max. 300±5℃ 5s max. 260±5℃ 350±10℃ 300±10℃ 350±10℃ 3s max. 4s max. 5s max. 5s max. 260±5℃ 260±5℃ 5–10 s 3±1s 350±10℃ 3＋10s 260±5℃ 10±1s 350±10℃ 300±10℃ 300±10℃ 350±10℃ 3＋10s 3＋10s 3s max. 2s 260±5℃ 260±10℃ 260±10℃ 260±5℃ 5–10 s 10±1s 5±1s 10±1s Please see P.154 1-2 1-3 0.3A 30V DC 0.1A 12V DC 0.1A 30V DC 1mA 5V DC 0.1A 12V DC –20±2℃ for 96h Dry heat Damp heat Manual soldering Dip soldering Reflow soldering 0.1A 30V DC 50BA 3V DC Initial contact 100mΩ 200mΩ max. 70mΩ max. resistance max. Insulation 100MΩ min. 100V DC resistance Voltage 100V AC for 1minute proof Robustness 3N for 1minute of terminal Operating 10N 20N Robustness direction 10N 5N 10N of actuator Pulling Static force direction Operating life without load 10,000cycles 10,000cycles 10,000cycles 100mΩ max.※2 Operating life without 500mΩ max. 300mΩ max. 10,000cycles 200mΩ max. 10,000cycles 130mΩ max.※2 load Load:as rating ● Poles-positions ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ― ● ● ● 1-4 ● ● 2-2 ● ● ● ● ● ● ― ● ● 2-3 ● ● ● ● ● ● ― ● ● ● ● ● 135 139 143 146 147 150 2-4 ● 4-2 Page 4 Vertical Horizontal 1 2 1 9.05 3 112 115 117 119 123 126 130 152 ● Slide Switches Soldering Conditions ………………………………………………………………………………………154 ● Slide Switches Cautions ………………………………………………………………………………………………………155 Note ※The operating temperature range for automotive applications can be raised upon request. Please contact us for requirements of this kind. 111 Slide Switches Soldering Conditions Example of Reflow Soldering Condition 1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple 0.1 to 0.2φ CA（K）or CC（T）at soldering portion（copper foil surface）. A heat resisting tape should be used for fixed measurement. Detector 3. Temperature profile Push Temperature (˚C ) 300 Slide Rotary Encoders Power Dual-in-line Package Type A max. B 200 C 100 Room temperature Time (s) Pre-heating D max. TACT SwitchTM CustomProducts ※ 20 max. E max. F Series（Reflow type） Small size General Use type Vertical 1-pole, 3-positions Big size General Use type Horizontal 1-pole, 2-positions Vertical 1-pole, 2-positions Other Use type A（℃） 3s max. B（℃） C（℃） D（s） 150 120 E（s） F（s） 250 SSSS2 200 Horizontal 1-pole, 3-positions 2-poles, 3-positions 240 SSSS7 250 SSAH, SSAG 260 230 SSAD 240 220 255 200 240 220 1-pole, 2-positions 1-pole, 3-positions（1.5mm） Horizontal SSSS8 1-pole, 3-positions（2mm） 1-pole, 4-positions 2-poles, 2-positions Vertical Notes 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. 3. ※SSAH and SSAG only 40's. 154