ALTECH K7045C

K70
Enclosure
Series
The K70 series enclosures are small to medium in size and offer
cost effective solutions for many applications.
They can accommodate 8 to 32 terminals for field wire
connections. Pressure plate terminals are standard with both the
fixed and pluggable versions.
MATERIALS
Housing
Housing Shell: ABS
Housing Cover: Polycarbonate, 10% Glass Filled
Terminals
Pressure Plate: Chromated Steel
Terminal Screw: Chromated Steel
Connector Contact: Tin Plated Bronze
Printed circuit boards can be mounted in three ways:
• Vertically
• Horizontally
• Behind the Front Cover
Boards can be placed vertically (perpendicular to the DIN rail)
and/or horizontally (parallel with the DIN rail). Enclosures with
plug-in covers can accept an additional board mounted directly
behind the front cover. This board is ideal for mounting
indicating devices such as LEDs, LCDs for monitoring, switches
and potentiometers for setting and adjusting purposes. The
housing cover snaps onto the housing shell. Two tabs lock the
cover firmly in place. Removal of the cover is possible for service
and repair. Potting is possible.
Temperature Range: 60°C (140°F) UL94VO
Standard Color: Light Gray
PROTECTION
K7O enclosures have an IP10 rating (hand protected). By using
optional terminal covers the protection rating can be increased
to IP20 (finger protected). VBG4 and other European accident
prevention requirements are met.
CONSTRUCTION
The K70 enclosures are supplied as unassembled kits.
Each kit consists of a housing shell and a snap-on cover,
complete with integral terminals and terminal-to-board
connection provisions. Integral printed circuit board guides are
molded into the housing shell to save time when inserting
boards, to prevent misconnections and to keep the boards in
place. Integral tabs on the bottom of the shell further help to
hold the boards in place and eliminate lateral movement and
warpage.
The K70 housing covers have external and internal barriers
between terminals to increase creepage distance and to help
prevent accidental touching of live potentials that may be
present. Optional terminal covers that decrease the size of the
opening are available as accessories.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
4
TERMINALS
Pressure Plate terminals with either fixed or pluggable terminalto-board connections are offered in the K70 enclosures. The
pressure plate, which is captive to the terminal screw,
automatically rises when the screw is loosened. One or two
wires of equal or different sizes up to 2.5mm2 (14 AWG) can be
terminated in each terminal. The grooved corners of the
pressure plate ensure positive wire retention. The flat bottom of
the terminal extends to the inside of the enclosure and provides
the terminal-to-board connection. The terminal screws can be
turned by a flat tip or a #2 Phillips screwdriver.
For better retention,
the plug-in type
covers have captive
screws at the corners
that insert into brass
bushings, molded
into the housing
shell. The pluggable
versions are ideal
whenever quick
connections and
replacement are
important. They also
reduce the danger of
misconnected wires
and downtime.
Upon request, terminals can be loaded in selected positions
only.
MOUNTING
The K70 Enclosures mount easily by snapping onto standard
35mm DIN Rail. Many can also be panel mounted using corner
mounting holes which accept two M4 or M5 (#6 or #10)
screws. These mounting holes are molded into two corners of
the housing shell base and do not increase the height or width
of the enclosure, thus insuring a compact, high density
arrangement when multiple enclosures are installed adjacent to
each other. Enclosure types K7022.5A, K7022.5B and
K7022.5C have two integral pull-out tabs on the base of the
enclosure for panel mounting. (Refer to Enclosure Mounting
Procedures on page 19.)
TERMINAL-TO-BOARD CONNECTIONS
The K70 series offers fixed and pluggable terminal-to-board
connection possibilities.
Fixed Connections
Fixed terminal-to-board connections can be made by Wire
Jumper, Fast On tabs or Machine Solderable Pins (K7022.5C
only).
Fast On tabs, (2.8 x 0.8 mm) accept industry standard Fast On
connectors crimped onto wire jumpers.
Wire Jumper connections can also be made by soldering a
wire jumper between the center holes of the Fast On tab and
the printed circuit board(s).
Machine Solderable Pins (offered only with type
K7022.5C) can be removed from the enclosure and machine
soldered to the board in the same step as other components,
saving assembly time.
Pluggable Connections
Pluggable terminal-to-board connections are made by using
Card Edge connectors. They are an integral part of the covers
of K7075P, K70100P and K70150P and plug directly onto the
board(s). Solder Pins are also provided in these enclosures for
terminal-to-board connections when mounting an additional
board directly behind the front cover. A Wire Jumper can be
soldered to these pins as well.
MARKING
The K70 enclosures have an area on the front of the cover for
marking and mounting of components such as switches,
potentiometers, LEDs or LCD indicators. Custom imprinted
plates can be inserted as well, allowing imprinting of plates
separate from the enclosure, reducing cost and delays.
ACCESSORIES
• 35 x 7.5 mm DIN Rail
• Terminal Covers
• Pull-Out Panel Mounting Tabs.
CUSTOMIZATION
Enclosures can be
customized with cutouts
and holes for
potentiometers, switches,
LEDs, LCDs and other
devices. Using state of the
art machining, we can
punch, drill or cut to your
most exacting
specifications. Custom
colors and special markings
are also available. Please let
us know what your
requirements are.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
5
K70 Enclosure Series
8 Terminal
10 Terminal
Solder/Tab Connection
Solder/Tab Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
25A, 300V, 24-14 AWG
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
0.8Nm
Up to 60°C (140°F)
Glass-filled Polycarbonate
(2) Vertical
UL94 V-O
Recommended Torque:
0.8Nm
Temperature Range:
PCB Locations:
Up to 60°C (140°F)
Mounting:
(10) Vertical
Flammability Rating:
35mm DIN Rail or
panel mount
Color:
M3.5
Cover Material:
PCB Locations:
Flammability Rating:
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M2.5
Cover Material:
Terminal Type:
25A, 300V, 22-14 AWG
Mounting:
UL94 V-O
35mm DIN Rail or
panel mount
Color:
Light Gray
Light Gray
ORDERING INFORMATION
Part Number
Type
90.001
K7022.5A
ORDERING INFORMATION
Description
Double Level
Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
Part Number
90.010
Type
K7045C
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
K7022.5A/TC1,TC2
Accessories
DIN Rail
Terminal Cover**
Part Number
2511120/1M
90.010.1
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Type
TS35x7.5/1M
K7045C/TC1
(To convert to inches divide by 25.4.)
1
98
Din Rail
DIN Rail
97
55
17.0
5
17
45
2
1
9.5
66
70
35
1.4
71
48
77
89
80
75
35
3
41
1.5
2
2
51
Part Number
2511120/1M
90.001.1/90.001.2
1.5
Accessories
DIN Rail
Terminal Covers*
2
22.5
M4
112
5
1.5
9
9
12
88
114
116
1
5
5
5
4
12
20
27
15.5
97
82
1.5 thick
1.5 thick
22
.5
1.5
R1
51
unusable space
.5
unusable space
1.5
.5
5
R2 R1.
59
97
82
55
1.5 thick
1.5 thick
65.1
34
.5 5
R2 R1.
.5 5
R2 R1.
6
3
65.1
34
34
17
25
2
65.5
30°
5
87.5
1
1.5
3
12
22
2
1
(To convert to inches divide by 25.4.)
R1
1
PCB DRAWING
97
82
(To convert to inches divide by 25.4.)
19
PCB DRAWING
1.5
15.5
70
* Note: Need one of each Terminal Cover.
** Note: One piece Teminal Cover covers both sides.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
6
K70 Enclosure Series
12 Terminal
12 Terminal
Solder/Tab Connection
Solder Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
20A, 300V, 24-14 AWG
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
0.8Nm
Up to 60°C (140°F)
Glass-filled Polycarbonate
(2) Vertical
UL94 V-O
Recommended Torque:
0.8Nm
Temperature Range:
PCB Locations:
Up to 60°C (140°F)
Mounting:
(2) Vertical
Flammability Rating:
35mm DIN Rail or
panel mount
Color:
M3.5
Cover Material:
PCB Locations:
Flammability Rating:
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M2.5
Cover Material:
Terminal Type:
20A, 300V, 22-14 AWG
Mounting:
UL94 V-O
35mm DIN Rail or
panel mount
Color:
Light Gray
Light Gray
ORDERING INFORMATION
Part Number
Type
90.020
K7022.5B
ORDERING INFORMATION
Description
Double Level
Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
Part Number Type
Description
PCB Connection
90.030
K7022.5C Shrouded Double
Wire Jumper/
Level Terminals Machine Solderable Pins
ACCESSORIES
Accessories
DIN Rail
Terminal Covers*
Part Number
2511120/1M
90.020.1/90.020.2
ENCLOSURE DRAWING
Type
TS35x7.5/1M
K7022.5BTC1/TC2
(To convert to inches divide by 25.4.)
97
DIN Rail
Accessories
DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
99
94
90
18
1 2 3
2
5
Type
TS35x7.5/1M
18
2
1
(To convert to inches divide by 25.4.)
22
1.4
89
68.9
1.5
17
2
3 1
unusable space
6.4
5.6
53.7
5
6 4
47.2
6
R1
24.5
1.5 thick
4 6
5
2
25.6
70
63.4
55
* Note: Need one of each Terminal Cover.
5
1
25
70
26.5
5
1 3
2
unusable space
1.5
55
R1
6
1.5 thick
12
1
(To convert to inches divide by 25.4.)
33°
30°
5
PCB DRAWING
1.5
12
3
1
29
DIN Rail
1
2
71
3 2 1
22.5
48.4
40.6
1
87.5
89
80
35
12
M4
PCB DRAWING
6 5 4
1
88
22.5
M4
71
89
80
75
35
77
48
1.4
4 5 6
Ø1.
2
12
6.4
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
7
K70 Enclosure Series
12 Terminal
16 Terminal
Solder/Tab Connection
Pluggable Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
25A, 300V, 22-14 AWG
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
M3.5
Cover Material:
0.8Nm
Recommended Torque:
Glass-filled Polycarbonate
PCB Locations:
Temperature Range:
(5) Vertical
(1) Behind Cover
Flammability Rating:
Up to 60°C (140°F)
Flammability Rating:
Color:
0.8Nm
PCB Locations:
Up to 60°C (140°F)
Mounting:
UL94 V-O
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M3.5
Cover Material:
Terminal Type:
10A, 300V, 22-14 AWG
(7) Vertical (6) Horizontal
(1) Behind Cover
Mounting:
UL94 V-O
Color:
35mm DIN Rail
Light Gray
35mm DIN Rail or
panel mount
Light Gray
ORDERING INFORMATION
Part Number
90.040
Type
K7055
ORDERING INFORMATION
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Fast On
Part Number Type
90.050
K7075P
ACCESSORIES
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Solder Pin/ Card Edge
Part Number
2511120/1M
90.050.1
Type
TS35x7.5/1M
K7075P/TC1
ACCESSORIES
Accessories
DIN Rail
Terminal Covers*
Part Number
2511120/1M
90.040.1
ENCLOSURE DRAWING
Type
TS35x7.5/1M
K7055/TC1
Accessories
DIN Rail
Terminal Cover*
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
55
(To convert to inches divide by 25.4.)
3
DIN Rail
4
9
42
17
15
66
18
7
6
11
11
2
1.5
75
21
2
56
53
44
77
1.7
98
9
3
70
77
7
70
87
2
1
2
66
1.2
98
71
1.5
73
35
3
35
73
1
51
R7
DIN Rail
(To convert to inches divide by 25.4.)
5 min.
PCB DRAWING
(To convert to inches divide by 25.4.)
6.5
1
Ø1.3
59
1.5 thick
34
.5
R2
65
6.85
51
3
4
1.15
8.5
67.5
45
1.5 thick
42.3
1.5 thick
19
1.5 thick
Ø1.6
82.5
1.5 thick
* Note: Need two Terminal Covers.
1.5 thick
58
97
82.5
82.5
1.5 thick
65.5
47.2
43.5
26.1
8.7
62
2.4
88.7
4
68
65
64.8
97
82.5
70.5
3
8.5
.5
R2
1.5 thick
2
71
82
88.7
2
65
34
59
1
5
112
114
116
19
PCB DRAWING
3
9
112
114
116
5
* Note: Need two Terminal Covers.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
8
12
K70 Enclosure Series
16 Terminal
20 Terminal
Pluggable Connection
(DIN Rail Mount Only)
Solder/Tab Connection
TECHNICAL INFORMATION
Electrical:
10A, 300V, 22-14 AWG
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
Up to 60°C (140°F)
Glass-filled Polycarbonate
0.8Nm
PCB Locations:
Up to 60°C (140°F)
(10) Vertical
Flammability Rating:
Mounting:
UL94 V-O
Recommended Torque:
Temperature Range:
(7) Vertical (6) Horizontal
(1) Behind Cover
Color:
M3.5
Cover Material:
0.8Nm
PCB Locations:
Flammability Rating:
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M3.5
Cover Material:
Terminal Type:
25A, 300V, 22-14 AWG
Mounting:
UL94 V-O
35mm DIN Rail or
panel mount
Color:
35mm DIN Rail
Light Gray
Light Gray
ORDERING INFORMATION
Part Number Type
90.050.5
K7075P
ORDERING INFORMATION
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Solder Tab/ Card Edge
Part Number
2511120/1M
90.050.1
Type
TS35x7.5/1M
K7075P/TC1
ACCESSORIES
Part Number
Type
90.060
K7045D1
Description
Double Level
Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
Accessories
DIN Rail
Terminal Covers*
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
1
Accessories
DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
1
4
3
73
35
9
1.5
51
66
1.5
35
9
5
5
1.5
11
10
2
70
11
5
5
4
12
9
5
PCB DRAWING
20
124
126
27
(To convert to inches divide by 25.4.)
2
15.5
2.4
1.5 thick
.5
R2
.5
R1
1.5 thick
.5
1.5
15.5
R1
.5
51
R1
42.3
45
1.5 thick
1.5 thick
* Note: Need two Terminal Covers.
Ø1.6
82.5
97
82.5
6.85
1.5 thick
5
59
5
1.5 thick
19
4
1.5 thick
34
.5 .
R2 R1
.5 .5
R2 R1
97
82
3
65
65.1
34
88.7
82
88,7
1.5 thick
65
34
3
65.1
34
22
4
2
65.5
97
82
1
70.5
97
82
70.5
68
.5
17
2
(To convert to inches divide by 25.4.)
8.5
R2
55
DIN Rail
112
114
116
6.5
5 min.
1
1.5
66
57
53
18
77
70
PCB DRAWING
2
6
3
DIN Rail
1
41
7
9
75
2
13
113
44
3
45
71
98
2
1.5
unusable space
8.5
1.15
67.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
9
K70 Enclosure Series
20 Terminal
20 Terminal
Solder/Tab Connection
Solder/Tab Connection
TECHNICAL INFORMATION
Electrical:
25A, 300V, 22-14 AWG
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
0.8Nm
Up to 60°C (140°F)
Glass-filled Polycarbonate
(10) Vertical
UL94 V-O
Up to 60°C (140°F)
35mm DIN Rail or
panel mount
(4) Vertical (6) Horizontal
Mounting:
UL94 V-O
35mm DIN Rail or
panel mount
Color:
Light Gray
ORDERING INFORMATION
Part Number
Type
90.070
K7045D2
ORDERING INFORMATION
Description
Shrouded Double
Level Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
Part Number
Type
90.080
K70100A
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Fast On
ACCESSORIES
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
Accessories
DIN Rail
Terminal Cover**
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
1
2
3
2
Part Number
2511120/1M
90.080.1
1
45
100
9
7
Type
TS35x7.5/1M
K70100/TC1
(To convert to inches divide by 25.4.)
98
82
6
43
15
52
70
2
5
5
127
129
1
4
17
12
21
14
PCB DRAWING
(To convert to inches divide by 25.4.)
1
65.1
34
2
65.5
34
65
5
.5 R1.
R2
34
.5 .5
R2 R1
.5 .5
R2 R1
1.5 thick
1.5 thick
97
82
97
82
1.5 thick
51
1.5 thick
3
95.5
85.5
1.5 thick
52
1.5
1.5 thick
19
R1
1.5
15.5
.5
22
R1
.5
19
51
4
96
85.5
1.5 thick
59
97
82
19
.5 .5
R2 R1
(To convert to inches divide by 25.4.)
65.1
34
6
59
65.5
3
97
82.5
2
112
114
116
2
2
4
27
9
3
35
56
5
5
11
86
79
19
78
DIN Rail
14
20.4
51
66
77
2
9
PCB DRAWING
25
10
70
35
DIN Rail
35
1.5
73
41
85.5
Accessories
DIN Rail
Terminal Covers*
15.5
0.8Nm
PCB Locations:
Flammability Rating:
Light Gray
1
Recommended Torque:
Temperature Range:
Mounting:
Color:
M3.5
Cover Material:
PCB Locations:
Flammability Rating:
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M3.5
Cover Material:
Terminal Type:
25A, 300V, 22-14 AWG
unusable space
83.5
unusable space
* Note: Integral Terminal Covers.
** Note: Need two Terminal Covers.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
10
K70 Enclosure Series
20 Terminal
32 Terminal
Pluggable Connection
Pluggable Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 22-14 AWG
Pressure Plate
Housing Material:
Terminal Screw Size:
ABS
Glass-filled Polycarbonate
0.8Nm
Up to 60°C (140°F)
Glass-filled Polycarbonate
Up to 60°C (140°F)
ORDERING INFORMATION
Description
Single Level
Terminals
PCB Connection
Wire Jumper/
Solder Pin/ Card Edge
Part Number
Type
90.100
K70150P
Part Number
2511120/1M
90.080.1
Type
TS35x7.5/1M
K70100/TC1
Accessories
DIN Rail
Terminal Cover*
98
82
6
(To convert to inches divide by 25.4.)
150
DIN Rail
98
44
35
14
52
R7
15
8.1
3.4
6.5
70
3
66
(To convert to inches divide by 25.4.)
145.5
1
49
42.3
4
2
8.6
3
143
6.4
65.5
.5
R2
4
65
1.5 thick
82,5
59
1.5 thick
129
5
1.5 thick
Ø1.6
51
1.5 thick
8.6
136
19
82
81
1.5 thick
97
85.5
1.5 thick
97
6.6
126
133
19
15.5
65.5
34
46
5
65
42.3
4
2.6
95
91
4
3
19
83.5
59
1.5 thick
88
1.5 thick
52
8.6
84
1.5 thick
77.4
34
19
52
1.5 thick
1
3
PCB DRAWING
2
3.4
8.6
5
112
114
116
146
88.4
4
2
82
88.7
96
87.1
9
13
20
17
4
7
4
6
(To convert to inches divide by 25.4.)
5.5
2
2
3
14
1
1.5
7
2
14
112
114
116
35
56
2
9
5
24
17
11
1
9
11
86
79
19
77
7
77
17
70
25
Type
TS35x7.5/1M
K70150P/TC1
43
15
min5
Part Number
2511120/1M
90.100.1
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
73
100
9
73
35
PCB Connection
Wire Jumper/
Solder Pin/ Card Edge
82.5
ENCLOSURE DRAWING
PCB DRAWING
Description
Single Level
Terminals
ACCESSORIES
Accessories
DIN Rail
Terminal Covers*
DIN Rail
35mm DIN Rail or
panel mount
Light Gray
ACCESSORIES
7
Mounting:
UL94 V-O
ORDERING INFORMATION
Part Number
Type
90.090
K70100P
(9) Vertical (6) Horizontal
(1) Behind Cover
Color:
35mm DIN Rail or
panel mount
Light Gray
0.8Nm
PCB Locations
Flammability Rating:
Mounting:
UL94 V-O
Recommended Torque:
Temperature Range:
(4) Vertical (6) Horizontal
(1) Behind Cover
Color:
M3.5
Cover Material:
PCB Locations
Flammability Rating:
Terminal Screw Size:
ABS
Recommended Torque:
Temperature Range:
Pressure Plate
Housing Material:
M3.5
Cover Material:
Terminal Type:
10A, 300V, 22-14 AWG
51
* Note: Need two Terminal Covers.
* Note: Need two Terminal Covers.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
11
KO4070
Enclosure
Series
Economical, compact KO4070 enclosures are supplied as easy to
assemble kits. They are ideal for housing I/O circuits, relays, timers
and other small devices. Each kit consists of two identical housing
half shells and 4 to 16 machine solderable terminals with standard
or extended length pins.
MATERIALS
Housing Shell: Polycarbonate, 10% Glass Filled
Terminal: Tinned Bronze
Terminal Screw: Chromated Steel
Temperature Rating:
125°C (257°F) UL94 VO
Standard Color: Light Gray
PROTECTION
KO4070 enclosures have an IP20 rating (finger protected) and
meet VBG4 and other European accident prevention requirements.
CONSTRUCTION
The KO4070 enclosures consist of two housing shells that snap
together, and sectional, snap-together terminals. The maximum
preassembled number of terminals are part of the enclosure kit.
Potting is not recommended. Enclosures with removable center
cover sections are available upon request.
BOARD PLACEMENT
Each enclosure can accept two boards, each up to 1.5mm (.0625
in.) thick, inserted vertically (parallel to the DIN rail) facing the
terminals. These boards can be machine soldered to the terminals.
Enclosure types KO4074 through KO4079, accept larger boards
that can be screwed to the sidewalls of the housing shells
(vertically, perpendicular to the DIN rail) using molded-in standoffs
and 2 screws. Boards mounted on the sides can be 1mm (.04 in.)
thick and require a wire jumper connection.
TERMINALS
Box clamp design terminal blocks are used with the KO4070
series enclosures. Wire(s) to be terminated are squeezed between
the bottom of the clamp and the busbar for reliable, gastight
connections. The terminal blocks can be machine soldered to the
board in the same step as the other components to save time and
labor. Enclosures with extended length pins are available to
increase enclosure cavity for large components.
All terminals have funnel shaped wire openings to eliminate wire
fraying. The terminal screws can be turned with a flat tip or a #1
or #2 Philips screwdriver.
MOUNTING
The KO4070 series have integral mounting feet that snap onto
standard 35mm DIN rail. They cannot be panel mounted.
MARKING
Silk screen or attach label to the face of the enclosure.
Terminal
Assembly
Right Housing
Shell
PC Board
Left Housing
Shell
Terminal
Assembly
PC Board
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
12
KO4070 Enclosure Series
4 Terminal
6 Terminal
TECHNICAL INFORMATION
Electrical:
16A, 300V, 22-12 AWG
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Box Clamp
Housing Material:
16A, 300V, 22-12 AWG
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
Temperature Range:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
UL94 V-O
(2) Vertical, Parallel
0.8Nm
PCB Locations:
UL94 V-O
(2) Vertical, Parallel
Mounting:
Light Gray
ORDERING INFORMATION
Type
KO4071
Recommended Torque:
Color:
35mm DIN Rail
Part Number
91.001
M3.5
Temperature Range:
Flammability Rating:
Mounting:
Light Gray
Terminal Screw Size:
Up to 125°C (257°F)
PCB Locations:
Color:
Box Clamp
Housing Material:
Glass-filled Polycarbonate
Recommended Torque:
Terminal Type:
35mm DIN Rail
ORDERING INFORMATION
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Part Number
91.010
Type
KO4072
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
DIN Rail
Type
TS35x7.5/1M
25
20
20
25
1
75
35
3
2
12.5
60
(To convert to inches divide by 25.4.)
1
2
(To convert to inches divide by 25.4.)
3
5.4
.3
Ø1
7.1
Ø1
.3
2
4.35
54
33
1.5 thick
56
58
1.5 thick
7.1
54
33
1.5 thick
57
5.4
.3
Ø1
PCB DRAWING
72
1
68
7.1
PCB DRAWING
60
12.5
68
1.5 thick
60
35
1
10
10
10
5.4
10
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
13
KO4070 Enclosure Series
6 Terminal
8 Terminal
TECHNICAL INFORMATION
Electrical:
16A, 300V, 22-12 AWG
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Recommended Torque:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
(1) Vertical, Perpendicular
(2) Vertical, Parallel
PCB Locations:
UL94 V-O
(2) Vertical, Parallel
Color:
Mounting:
Light Gray
M3.5
Temperature Range:
PCB Locations:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Box Clamp
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-12 AWG
Mounting:
Light Gray
35mm DIN Rail
35mm DIN Rail
ORDERING INFORMATION
Part Number
91.020
Type
KO4074
ORDERING INFORMATION
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Part Number
91.030
Type
KO4073
Description
Standard Length Pins
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
25
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
DIN Rail
25
20
20
1
1
90
35
35
2
4
6
60
21
68
PCB DRAWING
60
68
12.5
PCB DRAWING
(To convert to inches divide by 25.4.)
(To convert to inches divide by 25.4.)
4
5.4
6
2
30.5
3.5
1.5
1
5.4
.3
Ø1
15
18
18
4x45°
86
63
1.5 thick
56
54
4.35
15
33
1
28
31.5
52.5
1.5 thick
27.5
1 thick
1
54
52
40
58
1.5 thick
56
54
33
1.5 thick
28
7.1
Ø1.3
10.8
2
2.5
4
4.35
7.1
1
Ø
1.
3
1
7.1
60
PCB Connection
Solder Pins
10
10
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
14
KO4070 Enclosure Series
8 Terminal
9 Terminal
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Recommended Torque:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
(2) Vertical, Perpendicular
(2) Vertical, Parallel
PCB Locations:
UL94 V-O
(1) Vertical, Perpendicular
(2) Vertical, Parallel
Color:
Mounting:
Light Gray
M3.5
Temperature Range:
PCB Locations:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Box Clamp
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-12 AWG
Mounting:
Light Gray
35mm DIN Rail
35mm DIN Rail
ORDERING INFORMATION
Part Number
91.040
Type
KO4077
ORDERING INFORMATION
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Part Number
91.050
Type
KO4075
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
Accessories
1 Meter DIN Rail
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
25
DIN Rail
Part Number
2511120/1M
(To convert to inches divide by 25.4.)
DIN Rail
20
Type
TS35x7.5/1M
20
25
1
75
60
35
35
1
2
28
3
60
21
20
26
Ø1.3
20
26
4x45°
15
18
Ø1.3
4
1
10.8
15
18
27.5
57
1 thick
2
54
33
1.5 thick
28
27.5
1
54
52
40
58
1.5 thick
56
54
33
28
1.5 thick
1
28
31.5
52.5
1.5
1
1
1.5
Ø1.3
1.5
thick
30.5
3.5
54
52
40
1
6
72
3.5
3
4.35
7.1
5.4
1
30.5
1.5 thick
7.1
16.2
6
(To convert to inches divide by 25.4.)
7.1
2
2.5
4
1
PCB DRAWING
(To convert to inches divide by 25.4.)
60
68
2.5
68
PCB DRAWING
6
6
28
31.5
52.5
4x45°
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
15
KO4070 Enclosure Series
12 Terminal
12 Terminal
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Recommended Torque:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
(1) Vertical, Perpendicular
(2) Vertical, Parallel
PCB Locations:
UL94 V-O
(2) Vertical, Perpendicular
(2) Vertical, Parallel
Color:
Mounting:
Light Gray
M3.5
Temperature Range:
PCB Locations:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Box Clamp
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-12 AWG
Mounting:
Light Gray
35mm DIN Rail
35mm DIN Rail
ORDERING INFORMATION
Part Number
91.060
Type
KO4076
ORDERING INFORMATION
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Part Number
91.070
Type
KO4078
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
Accessories
1 Meter DIN Rail
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
20
25
DIN Rail
Part Number
2511120/1M
25
DIN Rail
20
1
1
1
4x45°
28
31.5
52.5
Ø1.3
Ø1.3
5.4
20
2.5
4
16.2
26
27.5
72
1 thick
1
4.35
7.1
57
2
20
26
1.5
1
54
28
27.5
1 thick
1
40
54
52
86
63
1.5 thick
56
5.4
33
2
7.1
1
54
33
1.5 thick
30.5
3.5
7.1
1.5
3.5
18
6
16.2
Ø1.3
28
3
30.5
15
(To convert to inches divide by 25.4.)
54
52
40
6
1.5 thick
10.8
Ø1.3
60
68
4
4
2.5
1
PCB DRAWING
(To convert to inches divide by 25.4.)
7.1
PCB DRAWING
28
60
68
21
6
6
1.5 thick
4
15
18
3
75
90
35
35
1
28
31.5
1
4x45°
52.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
16
KO4070 Enclosure Series
16 Terminal
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
Temperature Range:
Recommended Torque:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
PCB Locations:
UL94 V-O
(2) Vertical, Perpendicular
(2) Vertical, Parallel
Color:
Mounting:
Light Gray
35mm DIN Rail
ORDERING INFORMATION
Part Number
91.080
Type
KO4079
Description
Standard Length Pins
PCB Connection
Solder Pins
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
DIN Rail
25
20
90
35
1
4
28
6
60
68
PCB DRAWING
(To convert to inches divide by 25.4.)
1
4
5.4
Ø1.3
27.5
1 thick
1
52
40
54
86
63
1.5 thick
54
33
1.5
1
2.5
4
2
30.5
3.5
56
5.4
1.5 thick
6
7.1
16.2
28
7.1
16.2
1
20
26
Ø1.3
20
26
28
4x45°
31.5
52.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
17
KU4000
Enclosure
Series
Versatile, compact enclosures are ideal for applications with space
constraints and for mounting within large international style
enclosures with 45mm (1.77 in.) cutouts, such as Altech's EK and
AK series nonmetallic enclosures. Small to medium in size,
KU4000 enclosures offer 8 to 64 terminals for field wire
connections. Pressure plate or spring cage terminals are standard.
The KU4000 series are equipped with double level terminals which
provide a maximum number of external connections in a minimum
amount of space. Standard enclosures are supplied as kits,
containing the base,cover and the maximum number of terminals.
MATERIALS
Housing
Housing Shell: Polycarbonate, 10% Glass Filled
Base: Polycarbonate, 10% Glass Filled
Terminals
Terminal Pins: Tinned Steel
Pressure Plate: Chromated Steel
Terminal Screws: Chromated Steel
Spring Clamps: Stainless Steel
Temperature Rating: 110°C (230°F) UL94VO
Standard Color: Light Gray
PROTECTION
KU4000 enclosures have an IP20 rating (finger protected) and
meet VBG4 and other European accident prevention requirements.
CONSTRUCTION
The KU4000 series housings are supplied as unassembled kits.
Each kit consists of a flat base, a housing cover
and 8, 16, 24, 32, 48 or 64 terminals. Double
level terminals keep the enclosure size to a
minimum, and yet, due to the innovative housing
design, relatively large
components can be
mounted inside.
The terminals are machine solderable and have straight or right
angle pins, depending on enclosure type (Type C has straight pins,
Type B has right angle pins). We can also supply enclosures with
fewer than the maximum number of terminals, please contact us
with your requirements.
The KU4000 series are available in five widths, and are supplied
with terminals in three standard positions:
• Terminals on top and bottom
• Terminals on one side only
• Terminals at both ends, the center area has no terminals.
Cover plugs are available as accessories and can be plugged into
unused screw holes and wire entries. Plugs are offered as sets,
consisting of one screw-hole cover and one wire entry cover (Refer
to Accessories in the Ordering Pages).
Integral printed circuit board guides are
molded into the housing cover to save
time when inserting boards. They also
prevent misconnections and keep the
boards from moving.
Printed circuit boards can be mounted in
three ways:
KU4011B
•Horizontally, parallel with the base
•Vertically, perpendicular to the base
•Vertically, parallel with the DIN rail
One large board can be mounted
against the base of the enclosure
(parallel with the base) using terminals
KU4012C
with straight solder pins. Boards can
also be mounted vertically (perpendicular to the base) by using
terminals with right angle solder pins, or vertically (parallel with the
DIN rail) by using a wire jumper connection.
(Refer to the Ordering Pages).
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
18
The face of the cover is 45mm
(1.77 in.) high, and can be
mounted into standard DIN
distribution systems which have
45mm cutouts like Altechs EK
and AK series of industrial
enclosures. Mount the KU4000
enclosures together with circuit
breakers and other DIN rail
EK Series Industrial Enclosure
mount devices which also meet
the 45mm standard. Removal of the housing cover is possible for
service and repair after disconnecting the wires. KU4000 covers
cannot be potted without taking special steps.
TERMINALS
Pressure plate terminals are standard for the KU4000 enclosure and
ensure a vibration proof connection. The pressure plate, which is
captive to the terminal screw, automatically rises when the screw is
loosened. One or two wires of equal or different sizes up to 2.5mm2
(14 AWG) can be terminated in each terminal. The grooved corners
of the pressure plate ensure positive retention of the wires. The flat
bottom of the terminal extends to the inside of the enclosure and
provides the terminal-to-board connection. The terminal screws can be
turned by a flat tip or a #2 Philips screwdriver.
The KU4000 series is also available with spring cage terminals. The
terminal is opened by appling
pressure with a screwdriver to open
Terminal Screw
the clamp. Once the wire is
Terminal Assembly
inserted, the screwdriver is
removed, creating a vibration proof
Screw Hole
connection to the wire.
Cover Plug
TERMINAL-TO-BOARD
CONNECTIONS
The KU4000 series offers several
fixed terminal-to-board connection
possibilities. (Refer to the Ordering
Pages for connection types.)
Solder Pins
PC Board in
Horizontal
Position
Wire Jumper connections can be made by soldering a wire
jumper between the center hole of the right angle solder pins and
the printed circuit board(s). Upon soldering, the board is installed
into the enclosure complete with terminals and other components.
All KU4000 terminals have Machine Solderable Pins, which can
be machine soldered to the board(s) in the same step as the other
components, saving assembly time.
MOUNTING
The KU4000 enclosures snap onto standard 35mm DIN rail or can
be panel mounted. Mount one or several enclosures together, or
mix them with other DIN rail mounted devices such as terminal
blocks, circuit breakers, etc. The choice is yours.
MARKING
The KU4000 series have large marking areas on the front of the
cover.
ACCESSORIES
• Cover Plugs for Screw Hole and
Wire Entries
• Screws for Mounting Printed
Circuit Board
• Pull-Out Panel Mounting Tabs
• 35mm DIN Rail
CUSTOMIZATION
We can supply the KU4000,
series enclosure kits with the
exact number of terminals to meet
your requirements. Enclosures
can also be customized with
cutouts and holes. Custom colors
and special markings are also
available.
Enclosure Mounting Procedures
DIN Rail Mounting
The top of the enclosure base has notches molded onto the sides.
The bottom of the base has one spring-loaded tab that is factory
installed into a molded guide for DIN rail mounting.
When mounting, tilt the bottom of the enclosure slightly away from
the rail until the notches grab onto the top flange of the DIN rail.
Push the bottom of the enclosure forward towards the DIN rail. The
spring-loaded tab will snap onto the bottom of the rail and hold the
enclosure firmly in place.
To remove the enclosure
from the DIN rail, insert a
screwdriver
into
the
exposed slot in the tab and
pull the tab down. Pull
enclosure forward and
remove from the rail.
Panel Mounting
To mount enclosures on a panel or any flat surface, at least one tab
must be in place on the top and on the bottom of the enclosure base
in the panel mount position. Standard enclosures are supplied with
one tab on the bottom for DIN rail mounting.
Install one or more additional tabs (see Accessories in the
Ordering Pages) into molded tab guides on the back of the
enclosure base. Move the pre-installed bottom tab from the DIN rail
position to the panel mount position.
To move the tab, insert a screwdriver under the spring pin, lift it and
pull the tab forward until it extends approximately 6mm(.25 in.) from
the enclosure. Release pin and lock the tab in the panel mount
position.
We can supply the enclosures already set up for panel mounting if
desired. (Please specify when ordering).
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
19
KU4000 Enclosure Series
8 Terminal
8 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Screw / Pressure Plate
16A, 300V, 22-14 AWG
Terminal Screw Size:
Housing Material:
M3.5
Glass-filled Polycarbonate
0.8Nm
Up to 125°C (257°F)
Mounting:
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.201
KU4001B
(1) Horizontal
UL94 V-O
Mounting:
Light Gray
0.8Nm
Max. PCB’s:
Flammability Rating:
(1) Vertical
UL94 V-O
Color:
M3.5
Recommended Torque:
Temperature Range:
Up to 125°C (257°F)
Max. PCB’s:
Flammability Rating:
Screw / Pressure Plate
Terminal Screw Size:
Housing Material:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
35mm DIN Rail or
optional panel mounting*
Light Gray
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.202
KU4001C
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
61
58
53
43
17.5
PMA/KU
(To convert to inches divide by 25.4.)
6
17.5
Type
TS35x7.5/1M
SHPC
46
3
36
55
35
99
90
35
99
90
1
16
12
1
R1
unused space
21.7
49.5
13.1
1.5 thick
58.4
38.1
8
2.1
Ø1.5
2.54
2.1
1)
76.8
1 thick
1.5
.4
Ø1
47
35.9
52.4
71.8
55.2
4
2.54
6.7
(To convert to inches divide by 25.4.)
6
45°
1
PCB DRAWING
13.7
(To convert to inches divide by 25.4.)
21.6
PCB DRAWING
1.5
57.6
76.8
81
M4
53
58
61
DIN Rail
M4
DIN Rail
13.7
2
2
8.5
13.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
20
KU4000 Enclosure Series
8 Terminal
8 Terminal
Vertical PCB
Spring Clamp
Horizontal PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 26-14 AWG
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
–
Recommended Torque:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
–
Flammability Rating:
UL94 V-O
(1) Vertical
ORDERING INFORMATION
Glass-filled Polycarbonate
–
Temperature Range:
Recommended Torque:
–
Flammability Rating:
Max. PCB’s:
(1) Horizontal
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Part Number
Type
91.502
KU4037C
Description
Straight Pins
ACCESSORIES
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
*Panel Mount Tab
ENCLOSURE DRAWING
61
58
53
43
17.5
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
17.5
3
6
46
35
99
1
90
Part Number
2511120/1M
93.001.5
35
ENCLOSURE DRAWING
Type
TS35x7.5/1M
PMA/KU
36
Part Number
2511120/1M
93.001.5
90
Accessories
1 Meter DIN Rail
*Panel Mount Tab
18
12
DIN Rail
53
58
61
M4
(To convert to inches divide by 25.4.)
6
2.54
2.54
6.7
2.1
2.1
unused space
21.7
49.5
1.5
13.7
57.6
76.8
81
13.1
1.5 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
1 thick
8
21.6
R1
4
71.8
55.2
52.4
35.9
PCB DRAWING
13.7
(To convert to inches divide by 25.4.)
45°
1
DIN Rail
2
Ø1.5
M4
PCB DRAWING
PCB Connection
Machine Solder
54
ACCESSORIES
99
Terminal Screw Size:
Color:
35mm DIN Rail or
optional panel mounting*
Part Number
Type
91.501
KU4037B
Spring Cage Clamp
Housing Material:
UL94 V-O
Mounting:
Light Gray
Terminal Type:
10A, 300V, 26-14 AWG
Up to 125°C (257°F)
Max. PCB’s:
Color:
TECHNICAL INFORMATION
Electrical:
2
8.5
13.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
21
KU4000 Enclosure Series
8 Terminal
8 Terminal
Tall Vertical PCB
Screw Clamp
Tall Vertical PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Up to 125°C (257°F)
(1) Vertical
–
Max. PCB’s:
UL94 V-O
(1) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.203
KU4001BT
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
–
Temperature Range:
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Spring Cage Clamp
Housing Material:
M3.5
Temperature Range:
Terminal Type:
10A, 300V, 26-14 AWG
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.503
KU4037BT
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.5
Type
TS35x7.5/1M
PMA/KU
PMA/KU
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
100
97
92
82
17.5
(To convert to inches divide by 25.4.)
100
97
92
82
17.5
1
35
99
90
35
99
90
1
12
12
1
PCB DRAWING
(To convert to inches divide by 25.4.)
40
1
DIN Rail
(To convert to inches divide by 25.4.)
40
R1
.5
R1
2.54
2.54
45.2
60.2
2.1
unused space
88
71.8
55.2
52.4
35.9
80.5
.5
R1
2.1
maximum pin
height 1.4mm
Ø1.
4
1 thick
1.5
38.1
58.4
Ø1.
4
71.8
55.2
52.4
35.9
R1
2.54
2.54
45.2
60.2
2.1
1 thick
80.5
2
1
1.4
M4
1.5
38.1
58.4
PCB DRAWING
DIN Rail
2
1.4
M4
2.1
unused space
88
maximum pin
height 1.4mm
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
22
KU4000 Enclosure Series
16 Terminal
16 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Screw / Pressure Plate
16A, 300V, 22-14 AWG
Terminal Screw Size:
Housing Material:
35mm DIN Rail or
optional panel mounting*
Light Gray
ORDERING INFORMATION
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.220
KU4002C
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
PMA/KU
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
61
58
53
35
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
7
35
46
3
1
2
12
Mounting:
Color:
35mm DIN Rail or
optional panel mounting*
Part Number
Type
91.240
KU4002B
(1) Horizontal
UL94 V-O
Mounting:
Light Gray
Max. PCB’s:
Flammability Rating:
(2) Vertical
UL94 V-O
0.8Nm
Up to 125°C (257°F)
Max. PCB’s:
Color:
Recommended Torque:
Temperature Range:
0.8Nm
Up to 125°C (257°F)
M3.5
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Terminal Screw Size:
Housing Material:
M3.5
Glass-filled Polycarbonate
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
36
55
35
99
90
35
99
90
16
16
53
DIN Rail
PCB DRAWING
7
R1
(To convert to inches divide by 25.4.)
Ø2.4
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
M4
DIN Rail
Ø4.2
1
M4
58
61
2.54
2.54
6.7
2.1
2.1
42.5
57.6
76.8
81
Ø1.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
1.5 thick
18.4
unused space
8.5
1.7
2
21.7
49.5
30.9
3x8.5=25.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
23
KU4000 Enclosure Series
16 Terminal
16 Terminal
Vertical PCB
Spring Clamp
Horizontal PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 26-14 AWG
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
UL94 V-O
(2) Vertical
Color:
ORDERING INFORMATION
Part Number
Type
91.540
KU4038B
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
Light Gray
PCB Connection
Machine Solder/
Wire Jumper
Part Number
Type
91.520
KU4038C
Accessories
1 Meter DIN Rail
*Panel Mount Tab
ENCLOSURE DRAWING
61
58
53
43
3
7
46
35
35
99
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
35
90
1
Part Number
2511120/1M
93.001.5
16
18
2
DIN Rail
PCB DRAWING
45°
7
R1
(To convert to inches divide by 25.4.)
Ø2.4
(To convert to inches divide by 25.4.)
Ø4.2
M4
53
58
61
DIN Rail
M4
1
PCB Connection
Machine Solder
36
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
35
PCB DRAWING
Description
Straight Pins
54
Part Number
2511120/1M
93.001.5
ENCLOSURE DRAWING
99
35mm DIN Rail or
optional panel mounting*
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab
90
(1) Horizontal
Mounting:
ORDERING INFORMATION
Description
Right Angle Pins
ACCESSORIES
12
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Color:
35mm DIN Rail or
optional panel mounting*
Terminal Type:
Spring Cage Clamp
Housing Material:
UL94 V-O
Mounting:
Light Gray
10A, 300V, 26-14 AWG
2.54
2.54
6.7
2.1
2.1
42.5
57.6
76.8
81
Ø1.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
1.5 thick
18.4
unused space
8.5
1.7
2
21.7
49.5
30.9
3x8.5=25.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
24
KU4000 Enclosure Series
16 Terminal
16 Terminal
Tall Vertical PCB
Screw Clamp
Tall Vertical PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
UL94 V-O
Glass-filled Polycarbonate
Up to 125°C (257°F)
Flammability Rating:
(2) Vertical
UL94 V-O
Mounting:
Light Gray
(2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.243
KU4002BT
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Temperature Range:
Max. PCB’s:
Color:
Spring Cage Clamp
Housing Material:
0.8Nm
Flammability Rating:
Terminal Type:
10A, 300V, 26-14 AWG
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.543
KU4038BT
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.5
Type
TS35x7.5/1M
PMA/KU
PMA/KU
(To convert to inches divide by 25.4.)
ENCLOSURE DRAWING
100
97
92
82
35
16
(To convert to inches divide by 25.4.)
100
97
92
82
35
1
30
12 16
35
99
90
99
90
35
1
1
PCB DRAWING
(To convert to inches divide by 25.4.)
40
1
DIN Rail
(To convert to inches divide by 25.4.)
40
.5
R1
2.54
2.54
45.2
60.2
2.1
unused space
88
71.8
55.2
52.4
35.9
80.5
.5
R1
2.1
maximum pin
height 1.4mm
Ø1.
4
1 thick
R1
1.5
38.1
58.4
Ø1.
4
71.8
55.2
52.4
35.9
R1
2.54
2.54
45.2
60.2
2.1
1 thick
80.5
2
1
1.4
M4
1.5
38.1
58.4
PCB DRAWING
DIN Rail
2
1.4
M4
2.1
unused space
88
maximum pin
height 1.4mm
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
25
KU4000 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Up to 125°C (257°F)
(4) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.280
KU4003B
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.260
KU4003C
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
PMA/KU
(To convert to inches divide by 25.4.)
ENCLOSURE DRAWING
72
DIN Rail
46
72
3
DIN Rail
(To convert to inches divide by 25.4.)
9
45
1.5 thick
42.5
57.6
76.8
81
1.5
38.1
58.4
76.8
47
Ø1
.4
1 thick
Ø2.4
R1
13.7
8
4
71.8
55.2
52.4
35.9
PCB DRAWING
Ø4.2
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
1.5 thick
2.54
6.7
2.1
2.1
21.7
49.5
unused space
8.5
2
13,7
Ø1.5
1
2.54
2
53
58
61
9
M4
29
36
16
max.2
69
55
99
90
35
1
M4
35
1
16
2
99
90
12
PMA/KU
(To convert to inches divide by 25.4.)
8
61
58
53
Type
TS35x7.5/1M
SHPC
unused space
52.1
7x8.5=59.5
65.5
68.6
unused space
2
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
26
KU4000 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Spring Clamp
Horizontal PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 26-14 AWG
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
UL94 V-O
(4) Vertical
Color:
ORDERING INFORMATION
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
(1) Horizontal
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Part Number
Type
91.560
KU4039C
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.5
ENCLOSURE DRAWING
61
58
53
43
72
(To convert to inches divide by 25.4.)
8
72
3
46
35
99
90
1
Type
TS35x7.5/1M
PMA/KU
36
Part Number
2511120/1M
93.001.5
35
Accessories
1 Meter DIN Rail
*Panel Mount Tab
54
ACCESSORIES
99
90
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Color:
35mm DIN Rail or
optional panel mounting*
Part Number
Type
91.580
KU4039B
Spring Cage Clamp
Housing Material:
UL94 V-O
Mounting:
Light Gray
Terminal Type:
10A, 300V, 26-14 AWG
12 16
18
DIN Rail
53
58
61
M4
2
M4
(To convert to inches divide by 25.4.)
2.1
2.1
21.7
49.5
unused space
8.5
2
13,7
2.54
2.54
6.7
Ø1.5
1.5 thick
42.5
57.6
76.8
81
Ø2.4
1.5
38.1
58.4
76.8
47
Ø1
.4
1 thick
13.7
8
R1
4
71.8
55.2
52.4
35.9
PCB DRAWING
Ø4.2
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
DIN Rail
52.1
7x8.5=59.5
65.5
unused space
2
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
27
KU4000 Enclosure Series
32 Terminal
32 Terminal
Tall Vertical
PCB Screw Clamp
Tall Vertical
PCB Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Up to 125°C (257°F)
(4) Vertical
–
Max. PCB’s:
UL94 V-O
(4) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.283
KU4003BT
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
–
Temperature Range:
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Spring Cage Clamp
Housing Material:
M3.5
Temperature Range:
Terminal Type:
10A, 300V, 26-14 AWG
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.583
KU4039BT
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
Part Number
2511120/1M
93.001.5
Type
TS35x7.5/1M
PMA/KU
PMA/KU
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
100
97
92
82
72
16
Accessories
1 Meter DIN Rail
*Panel Mount Tab
16
(To convert to inches divide by 25.4.)
100
97
92
82
72
1
35
99
90
35
12
1
40
2
1
PCB DRAWING
(To convert to inches divide by 25.4.)
1
DIN Rail
(To convert to inches divide by 25.4.)
40
R1
.5
R1
2.54
2.54
45.2
60.2
2.1
unused space
88
71.8
55.2
52.4
35.9
80.5
.5
R1
2.1
Ø1.
4
1 thick
1.5
38.1
58.4
Ø1.
4
71.8
55.2
52.4
35.9
R1
2.54
2.54
45.2
60.2
2.1
1 thick
80.5
PCB DRAWING
2
16
M4
DIN Rail
2
2
M4
1.5
38.1
58.4
99
90
1
2.1
unused space
88
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
28
KU4000 Enclosure Series
16 Terminal
16 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(2) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.250
KU4090B16
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Description
Straight Pins
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
18
16
2
55
101
66
66
43
54
59
62
DIN Rail
PCB DRAWING
Ø2.4
Ø4.2
R1
81
76.8
13.7
2.54
2.54
6.7
2.1
2.1
unused space
2
8.5
62
57.6
Ø1.5
42.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
4
34.8
33.8
1.5
1.5 thick
19
2
3x8.5=25.5
86.4
99.5
45
18
45°
(To convert to inches divide by 25.4.)
44
(To convert to inches divide by 25.4.)
43
54
59
62
19
M4
13.7
DIN Rail
71.8
55.2
52.4
35.9
3
84
62
99
90
35
47
16
35
55
84
62
99
90
35
46
105
1
1
PMA/KU
(To convert to inches divide by 25.4.)
105
PCB DRAWING
Type
TS35x7.5/1M
SHPC
1.5 thick
1
21.7
49.5
2max.
ENCLOSURE DRAWING
29
PCB Connection
Machine Solder
29
36
ACCESSORIES
Part Number
Type
91.230
KU4090C16
102
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
29
KU4000 Enclosure Series
16 Terminal
16 Terminal
Vertical PCB
Screw Clamp
with vent slots
Horizontal PCB
Screw Clamp
with vent slots
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
16A, 300V, 22-14 AWG
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Recommended Torque:
Up to 125°C (257°F)
0.8Nm
Flammability Rating:
(3) Vertical
Max. PCB’s:
UL94 V-O
Mounting:
Light Gray
M3.5
Temperature Range:
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Terminal Type:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
Description
91.255 KU4090B16V Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.235 KU4090C16V
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
PMA/KU
99
90
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
(To convert to inches divide by 25.4.)
ENCLOSURE DRAWING
105
Type
TS35x7.5/1M
SHPC
PMA/KU
35
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
(To convert to inches divide by 25.4.)
18
105
M4
PCB DRAWING
18
43
54
59
DIN Rail
(To convert to inches divide by 25.4.)
Ø2.4
Ø4.2
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
DIN Rail
43
54
59
13.7
M4
99
19
99
90
99
90
1
R1
2.54
2.54
6.7
2.1
2.1
unused space
2
8.5
1.5
44
34.8
33.8
1.5 thick
19
2
3x8.5=25.5
86.4
99.5
45
13.7
62
57.6
Ø1.5
42.5
81
76.8
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
1.5 thick
1
21.7
49.5
102
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
30
KU4000 Enclosure Series
24 Terminal
24 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(6) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.290
KU4090B24
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.270
KU4090C24
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
1
26
29
36
101
34
70
2
3
35
12
99
90
105
35
99
90
105
16
44
R1
.4
18
19.4
1 thick
2.1
2.54
1.5 thick
86.4
8.5
15x8.5 = 93.5
19
2
1.5 thick
1
unused space
21.7
2
1.5
99.5
9.2
9.7
8.3
2.5
R1
2.54
2.1
6.7
Ø1.5
Ø1
57.4
47
76.8
1.5
4
(To convert to inches divide by 25.4.)
45
26
6.3
30°
45°
14.9
13
PCB DRAWING
13.7 42.5
28.8
38.4
81
37.7
Ø2.4
(To convert to inches divide by 25.4.)
DIN Rail
Ø4.2
PCB DRAWING
43
54
59
62
DIN Rail
M4
43
54
59
62
19
M4
2 max.
2
16
102
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
31
KU4000 Enclosure Series
48 Terminal
48 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
16A, 300V, 22-14 AWG
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(6) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.330
KU4090B48
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Part Number
Type
91.310
KU4090C48
Description
Straight Pins
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
1
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
21
105
(To convert to inches divide by 25.4.)
DIN Rail
PCB DRAWING
21
45°
19
M4
R1
17
43
54
59
62
(To convert to inches divide by 25.4.)
13.7
M4
3
101
54
59
62
46
55
99
90
35
12
Ø2.4
99
90
35
2
DIN Rail
PMA/KU
(To convert to inches divide by 25.4.)
1
105
16
Type
TS35x7.5/1M
SHPC
29
36
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
1
PCB Connection
Machine Solder
max.2
ACCESSORIES
PCB DRAWING
Terminal Type:
2.54
6.7
2.1
2.1
21.7
49.5
unused space
42.5
57.6
76.8
81
1.5
15x8.5=93.5
99.5
45
86.4
8.5
2
19
13,7
1.5 thick
Ø1.5
2.54
44
Ø4.2
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
2
1.5 thick
unused space
1
102
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
32
KU4000 Enclosure Series
48 Terminal
48 Terminal
Vertical PCB
Spring Clamp
Horizontal PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 26-14 AWG
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
–
Recommended Torque:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
–
Flammability Rating:
UL94 V-O
(6) Vertical
Glass-filled Polycarbonate
–
Temperature Range:
Recommended Torque:
–
Max. PCB’s:
UL94 V-O
(1) Horizontal
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.530
KU4040B
Terminal Screw Size:
Flammability Rating:
Mounting:
Light Gray
Spring Cage Clamp
Housing Material:
Up to 125°C (257°F)
Max. PCB’s:
Color:
Terminal Type:
10A, 300V, 26-14 AWG
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Description
Straight Pins
ACCESSORIES
Part Number
2511120/1M
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.5
ENCLOSURE DRAWING
62
59
54
43
105
(To convert to inches divide by 25.4.)
105
3
21
35
35
99
90
1
Type
TS35x7.5/1M
PMA/KU
12
46
36
Accessories
1 Meter DIN Rail
*Panel Mount Tab
99
90
PCB Connection
Machine Solder
54
ACCESSORIES
Part Number
Type
91.510
KU4040C
18
16
PCB DRAWING
21
(To convert to inches divide by 25.4.)
Ø2.4
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
DIN Rail
13.7
2
M4
54
59
62
DIN Rail
M4
R1
2.54
6.7
2.1
2.1
42.5
57.6
76.8
81
1.5
unused space
86.4
8.5
2
15x8.5=93.5
99.5
13,7
1.5 thick
Ø1.5
2.54
44
Ø4.2
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
2
unused space
21.7
49.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
33
KU4000 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Screw Clamp
terminals on one side only
Horizontal PCB
Screw Clamp
terminals on one side only
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(8) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.320
KU4011B
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
PMA/KU
(To convert to inches divide by 25.4.)
11
13
140
46
34
3
99
90
35
99
90
35
42
140
Type
TS35x7.5/1M
SHPC
16
135
16
2
R1
Ø4.2
Ø2.4
19.4
1 thick
2.1
2.54
9.2
9.7
8.3
2.5
R1
2.54
2.1
6.7
1.5
57.4
.4
18
Ø1
47
76.8
1.5
44
4
120.4
1.5 thick
2
14
8.5
15x8.5=127.5
2
1.5 thick
1
unused space
21.7
(To convert to inches divide by 25.4.)
133.5
11
6.3
30°
45°
14.9
13
PCB DRAWING
136.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
34
45
37.7
DIN Rail
42.5
9.6
13.7
81
(To convert to inches divide by 25.4.)
43
54
59
62
14
M4
2.1
PCB DRAWING
DIN Rail
43
54
59
62
Ø1.5
M4
2max.
2
12
29
36
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
70
ACCESSORIES
Part Number
Type
91.300
KU4011C
KU4000 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Screw Clamp
terminals in corners only
Horizontal PCB
Screw Clamp
terminals in corners only
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
16A, 300V, 22-14 AWG
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(4) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.360
KU4012B
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
1
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
12
140
46
3
84
16
12
16
2.54
2.54
6.7
67
65
2
42.5
57.6
76.8
81
1.5 thick
120.4
8.5
2
2.1
2.1
62
44
Ø4.2
1.5
Ø1.5
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
14
13.7
12
3x8.5=25.5
133.5
1.5 thick
unused space
1
21.7
49.5
2max.
(To convert to inches divide by 25.4.)
13.7
PCB DRAWING
R1
1 thick
2
DIN Rail
Ø2.4
(To convert to inches divide by 25.4.)
43
54
59
62
14
M4
43
54
59
62
DIN Rail
45°
1
135
67
65
M4
PCB DRAWING
55
2
84
62
99
90
35
99
90
35
140
29
36
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
45
ACCESSORIES
Part Number
Type
91.340
KU4012C
136.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
35
KU4000 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Screw Clamp
with vent slots
Horizontal PCB
Screw Clamp
with vent slots
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
16A, 300V, 22-14 AWG
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O
Up to 125°C (257°F)
(1) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.365
KU4012BV
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
0.8Nm
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
ACCESSORIES
Part Number
Type
91.345
KU4012CV
Description
Straight Pins
PCB Connection
Machine Solder
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
(To convert to inches divide by 25.4.)
140
140
12
1
99
90
99
90
14
43
54
59
62
PCB DRAWING
(To convert to inches divide by 25.4.)
13.7
1
(To convert to inches divide by 25.4.)
12
45°
PCB DRAWING
43
54
59
62
M4
Ø2.4
M4
R1
2.54
6.7
2
unused space
42.5
57.6
76.8
81
14
13.7
1.5 thick
120.4
8.5
2
2.1
2.1
67
65
3x8.5=25.5
133.5
1.5 thick
1
21.7
49.5
136.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
36
45
2.54
62
44
Ø4.2
1.5
Ø1.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
KU4000 Enclosure Series
64 Terminal
64 Terminal
Vertical PCB
Screw Clamp
Horizontal PCB
Screw Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Up to 125°C (257°F)
0.8Nm
UL94 V-O
Up to 125°C (257°F)
(8) Vertical
0.8Nm
Max. PCB’s:
UL94 V-O
(1) Horizontal, (2) Vertical
Color:
35mm DIN Rail or
optional panel mounting*
Mounting:
Light Gray
ORDERING INFORMATION
Part Number
Type
91.400
KU4013B
Recommended Torque:
Flammability Rating:
Mounting:
Light Gray
M3.5
Temperature Range:
Max. PCB’s:
Color:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Flammability Rating:
Screw / Pressure Plate
Housing Material:
M3.5
Temperature Range:
Terminal Type:
16A, 300V, 22-14 AWG
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Part Number
Type
91.380
KU4013C
PCB Connection
Machine Solder
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
SHPC
PMA/KU
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
140
99
90
35
99
90
35
12
16
PMA/KU
(To convert to inches divide by 25.4.)
140
1
Type
TS35x7.5/1M
SHPC
46
10
3
55
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
Screw-hole and
91.201.1
Wire-Entry Cover Plug Set
*Panel Mount Tab
93.001.5
135
16
DIN Rail
Ø2.4
10
R1
(To convert to inches divide by 25.4.)
13.7
PCB DRAWING
(To convert to inches divide by 25.4.)
45°
1
43
54
59
62
14
M4
2max.
43
54
59
62
DIN Rail
PCB DRAWING
2
2
M4
29
36
ACCESSORIES
Description
Straight Pins
2.54
6.7
2.1
2.1
8.5
2
unused space
120.4
15x8.5=127.5
133.5
2
42.5
57.6
76.8
81
1.5 thick
14
unused space
1
21.7
49.5
1.5 thick
45
2.54
1.5
13.7
44
Ø4.2
Ø1.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
136.5
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
37
KU4000 Enclosure Series
64 Terminal
64 Terminal
Vertical PCB
Spring Clamp
Horizontal PCB
Spring Clamp
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 26-14 AWG
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
UL94 V-O
(8) Vertical
Color:
Terminal Screw Size:
–
Recommended Torque:
–
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
(1) Horizontal
Color:
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number
Type
91.600
KU4041B
Spring Cage Clamp
Housing Material:
UL94 V-O
Mounting:
Light Gray
Terminal Type:
10A, 300V, 26-14 AWG
Mounting:
Light Gray
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder/
Wire Jumper
Description
Straight Pins
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
PMA/KU
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.5
ENCLOSURE DRAWING
62
59
54
43
140
(To convert to inches divide by 25.4.)
140
3
10
35
99
90
1
Type
TS35x7.5/1M
PMA/KU
12
46
36
Part Number
2511120/1M
93.001.5
35
Accessories
1 Meter DIN Rail
*Panel Mount Tab
99
90
PCB Connection
Machine Solder
54
ACCESSORIES
Part Number
Type
91.610
KU4041C
18
16
DIN Rail
M4
2
M4
DIN Rail
10
R1
(To convert to inches divide by 25.4.)
13.7
PCB DRAWING
Ø2.4
1
(To convert to inches divide by 25.4.)
45°
PCB DRAWING
54
59
62
2.54
2.54
6.7
2.1
2.1
unused space
8.5
2
1.5 thick
120.4
15x8.5=127.5
133.5
2
42.5
57.6
76.8
81
1.5
13.7
44
Ø4.2
Ø1.5
1 thick
1.5
38.1
58.4
76.8
47
Ø1
.4
71.8
55.2
52.4
35.9
4
unused space
21.7
49.5
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
38
KO4700
Enclosure
Series
Ideal for industrial applications. Small to large in size, KO4700
enclosures can accommodate 8 to132 terminals for field wire
connections. Series KO4700 enclosures can be customized to the
exact number of terminals required. Standard enclosures are
equipped with the maximum number of terminal strips and
terminals.The KO4700 series are available with two types of
terminations for connecting external wires. The Pressure Plate type
terminals,with a center line spacing of 9mm (.35 in.) and the Box
Clamp design, which has a 5mm (.19 in.) center line spacing for
much higher density.
MATERIALS
Housing
Housing Shell: Polycarbonate, 10% Glass Filled
Cover: Polycarbonate, 10% Glass Filled
Cover Panel: Clear Polycarbonate or Glass Filled Polycarbonate
Terminals
Pressure Plate: Zinc Plated, Chromated Steel
Terminal Screw: Zinc Plated, Chromated Steel
Clamp: Nickel Plated Brass
Busbar: Tin Plated Bronze
Connector Contact: Beryllium Copper, Tin Plated
(gold plating available)
Temperature Rating:
125°C (257°F), UL94VO
Housing Shell Color: Black
Terminal Cover Color: Tan
PROTECTION
KO4700 enclosures have an IP20 rating (finger protected) and meet
VBG4 and other European accident prevention requirements.
CONSTRUCTION
The KO4700 enclosure series consists of a black housing shell and
a tan cover with integral terminals and terminal-to-board connections.
They are supplied unassembled.
The housing shell has molded printed circuit board
guides to save time when inserting printed circuit
boards, prevent misconnections and to keep the
boards from moving. Integral tabs on the bottom of
the shell further help to hold boards in place,
eliminating lateral movement. KO4700 housing
shells can be potted.
Printed circuit boards can be mounted in three ways:
• Behind the Front Cover
• Horizontally
• Vertically
Depending on the enclosure type,one board can be mounted directly
behind the front cover
(parallel to the DIN
Housing Shell
rail).Boards can also be
PC Board
mounted
horizontally
Wire Jumper
(parallel to the DIN rail) or
vertically (perpendicular to
Terminal
the DIN rail). (Refer to the
Cover
Ordering Pages for board
patterns and location of
board guides.)
The housing cover snaps onto the housing shell. Two keyed tabs lock
the cover firmly in place. Removal of the cover is possible for service
and repair.
COVER DESIGNS
Single piece, tan color covers are typically used with the smaller
enclosures. They incorporate terminals and connections to the inside
of the enclosure. In some of the smaller enclosures, the cover doubles
as a plug.
A printed circuit board can be mounted directly behind the front
cover. This board is ideal for mounting components used for setting,
adjusting and monitoring such as switches, potentiometer, LEDs and
LCDs. There is no interferance with any other boards mounted within
the enclosure.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
39
Terminal Screw
For better retention, the strips have captive screws at each end that
insert into brass bushings, molded into the housing shell. Up to four
terminal strips can be used per enclosure.The pluggable versions are
ideal whenever quick connections and replacement of boards and
devices is important. They also reduce the danger of misconnected
wires and downtime.
MOUNTING
The KO4700 Series enclosures are designed to be mounted on
standard 35 x 7.5mm DIN rail but will also fit on the 35 x15mm
DIN rail. The extra high enclosures should be mounted on the
deeper, 35 x 15mm DIN rail. (Refer to the Ordering Pages on the
following pages to determine the correct size rail for the enclosure
you select.)
KO4700 series enclosures
can also be panel mounted
using pull-out tabs on the
base of the enclosure. One TS35 x 7.5
TS35 x 15
tab is factory installed on
each enclosure. Up to a
total of 6 pull-out mounting tabs can be installed (See Accessories)
(Refer to page 19 for mounting instructions.)
Solder Pin
PC Board
TERMINAL-TO-BOARD CONNECTIONS
The KO4700 Series offers fixed and pluggable terminal-to-board
connection possibilities. (Please refer to the Ordering Pages on the
following pages for your selection.)
Fixed Connections
Fixed terminal-to-board connections can be made by Wire Jumper,
Fast On tabs, Solder tabs, or Machine Solderable Pins.
→
Box Clamp Termination
The box clamp terminal accepts wires up to 4mm2 (12 AWG).
When the terminal screw is tightened, the serrated bottom of the wire
protector pushes the wire to be terminated against the serrated
busbar. The busbar extends to the inside of the enclosure to provide
the terminal-to-board connection.
7.5mm
(.29 in.)
→
Wire Entry
Pluggable Connections
The pluggable terminal strips of the KO4700 series fit across the
width of the enclosure and plug directly into the board(s) by using a
Card Edge connector. Enclosures equipped with pressure plate
terminals also provide Solder Tabs for terminal-to-board connections
when mounting an additional board directly behind the front cover.
A Wire Jumper can be soldered to these tabs as well.
→
Pressure Plate Termination
This type of terminal consists of a pressure
plate (captive to the terminal screw) and
the terminal bottom. The pressure plate
rises automatically when the screw is
loosened. One or two wires, of equal or
different sizes up to 2.5mm2 (14 AWG)
can be terminated. The grooved corners
of the pressure plate ensure positive
retention of wire(s). The flat bottom of the
terminal extends to the inside of the
enclosure and connects the terminal to the
board(s) inside.
Machine Solderable Pins can be machine soldered to the
board in the same step as the other components, saving assembly
time. The metal parts of the terminals are supplied as separate strips
which snap into the terminal housing after soldering.
→
TERMINAL DESIGNS
Select from Pressure Plate or Box Clamp terminals with wire
protectors, and fixed or pluggable terminal-to-board connections.
(Please refer to the Ordering Pages). Removable fixed or pluggable
terminal strips can be replaced by terminal plugs if not all of the
external connections of the standard enclosure are needed. The
terminal screws used with both the pressure plate and box clamp
designs can be operated with a flat tip or a #1 or #2 Philips type
screwdriver.
Solder Tab can be hand soldered to the board.
15mm
(.59 in.)
Modular covers consist
of a one-piece tan frame
with matching flat front
panel. Some versions
have a front cover panel
that is removable and Removable Cover
Panel, Clear
offered in matching tan
Removable Cover
or clear.The front covers
Panel, Tan
can be custom imprinted
Card Edge
Connectors
or marking plates can
be produced and installed behind the transparent front cover panel.
MARKING
KO4700 enclosures have a flat center area on the cover for marking
and mounting of components. Several types have removable front
cover panels, which can be marked at a separate location.
Imprinted marking plates can be used in conjunction with the
transparent, removable cover panel.
ACCESSORIES
• Terminal Cover Strips
• Pull-Out Panel Mounting Tabs
• Screws for Mounting Printed Circuit Board
• 35 x 7.5mm DIN Rail
• 35 x 15mm DIN Rail
Fast On tabs, 2.8mm (.11in.) accept industry standard Fast On
connectors. Use with
Housing Shell CUSTOMIZATION
wire jumpers to connect
PC Board Enclosures can be customized to the
to board(s).
Terminal Carrier
exact number of terminals needed.
Dummy Insert
Wire Jumper
PC Board We can punch, drill or cut custom
Terminal Cover
cutouts and holes for potentiometers,
connections can also
Cover Frame switches, LEDs or LDCs. Custom
be made by soldering
Marking Plate
colors and special markings are
a wire jumper between
Front Panel Cover
also available. Please call us for
the center hole of the
further information.
Fast On tab and the
printed circuit board(s).
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
40
MODULAR ENCLOSURES
A new group of modular enclosures has been added to the KO4700 series. These enclosures can be ordered in a variety of terminal
arrangements allowing for many different customized configurations. Terminal sets are available in 3, 4 and 7 pole blocks as well as blank
blocks without terminals. High Current terminals are also available on some models. This new modular terminal design allows anywhere from
0 to 56 terminals for field wire connections.
The KO4700 modular enclosures have the same design features of the standard series as well as the same materials. The terminals are of the
box clamp style. The standard terminals feature pluggable connections while solder connections are used on the high current terminals. Printed
circuit board placement is horizontal (parallel to the DIN rail) or vertical (perpendicular to the DIN rail).
Base Housing
Shown KO4700 DIN Enclosure
28 Terminal Maximum
Pluggable Card Edge Connection
PCB Assembly
(not included)
Cover Frame*
Terminal Blocks
Cover Panel*
Ordering Information
The modular enclosures are ordered in separate pieces. A complete enclosure consists of a base, cover frame*, cover panel* and the
appropriate number of terminal blocks. Standard terminal blocks can be ordered as blank blocks with no termination points or with 3, 4, or
7 terminations. High current terminal blocks are available on some models. Theses blocks can also be ordered as blank blocks with no
terminations or with 3 terminations. (Please refer to the Ordering Pages on the following pages for a list of how many blocks should be ordered
per enclosure).
* High current versions have one piece center cover section instead of this two piece design.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
41
KO4700 Enclosure Series
8 Terminal
8 Terminal
Solder
Connection
Solder/Tab
Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polycarbonate
0.8Nm
Up to 125°C (257°F)
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O (V-2 Clear Panel)
90.201.1
KO4712
90.201.2
KO4712
ORDERING INFORMATION
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Machine
Solderable Pins
Machine
Solderable Pins
Machine
Solderable Pins
Part Number Type
90.202
KO4712B
90.202.1
KO4712B
90.202.2
KO4712B
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Wire
Jumper
Wire
Jumper
Wire
Jumper
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
ACCESSORIES
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.2
ENCLOSURE DRAWING
2
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Type
TS35x7.5/1M
PMA
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
22.5
17
(To convert to inches divide by 25.4.)
22.5
17
1
3.8
20
4.8
118
121
2
20
4.5
73
35
(To convert to inches divide by 25.4.)
1
34.8
118
121
Din Rail
65.4
34.8
35
1.5 thick
19.4
Ø1
65.4
3
4.8
PCB DRAWING
(To convert to inches divide by 25.4.)
67
5.4
3.8
Din Rail
PCB DRAWING
16.2
56
64
35
56
64
73
3
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
ORDERING INFORMATION
Part Number Type
90.201
KO4712
(2) Vertical
Mounting:
Color:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
0.8Nm
Max. PCB’s:
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
Recommended Torque:
Temperature Range:
(2) Vertical
(1) Behind cover
Color:
M3.5
Cover Material:
Max. PCB’s:
Flammability Rating:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Box Clamp
Housing Material:
M3.5
Cover Material:
Terminal Type:
16A, 300V, 22-12 AWG
unused spaceunused space
unused space
107.5
1.5 thick
80
1.5 thick
87
107.5
unused space
85
55.6
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
42
KO4700 Enclosure Series
10 Terminal
10 Terminal
Spring Clamp
Solder/Tab Connection
Solder/Tab
Connection
TECHNICAL INFORMATION
Electrical:
16A, 300V, 24-14 AWG
TECHNICAL INFORMATION
Electrical:
Terminal Type:
Spring Cage Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polycarbonate
–
Up to 125°C (257°F)
Recommended Torque:
0.8Nm
Temperature Range:
(2) Vertical
Max. PCB’s:
Up to 125°C (257°F)
Mounting:
UL94 V-O
M3.5
Cover Material:
Glass-filled Polycarbonate
Max. PCB’s:
Flammability Rating:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Pressure Plate
Housing Material:
–
Cover Material:
Terminal Type:
25A, 300V, 22-14 AWG
(2) Vertical
Flammability Rating:
Mounting:
UL94 V-O
35mm DIN Rail
Color:
35mm DIN Rail
Color:
Black Housing with Tan Cover
Black Housing with Tan Cover
ORDERING INFORMATION
Part Number Type
90.215
KO4761
ORDERING INFORMATION
Description
Solid Cover
PCB Connection
Wire Jumper/
Fast On
Part Number Type
90.230
KO4762
Description
Solid Cover
PCB Connection
Wire Jumper/
Fast On
Part Number
2511120/1M
Type
TS35x7.5/1M
ACCESSORIES
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
45
Accessories
1 Meter DIN Rail
ENCLOSURE DRAWING
8.7
2
63
70
73
34.4
107.5
79.5
1.5 thick
2
(To convert to inches divide by 25.4.)
1.5 thick
107.5
34.4
120
121
DIN Rail
79.5
PCB DRAWING
(To convert to inches divide by 25.4.)
2
64
70
33
41
45
120
121
2
Din Rail
PCB DRAWING
73
70
2
2
(To convert to inches divide by 25.4.)
unused space
63
unused space
65.4
65.4
unused space
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
43
KO4700 Enclosure Series
16 Terminal
16 Terminal
Solder
Connection
Solder/Tab
Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polycarbonate
0.8Nm
Up to 125°C (257°F)
Glass-filled Polycarbonate
Up to 125°C (257°F)
UL94 V-O (V-2 clear panel)
Black Housing with Tan Cover
KO4763A
90.292
KO4763A
35mm DIN Rail
Black Housing with Tan Cover
ORDERING INFORMATION
90.291
(2) Vertical
Mounting:
Color:
35mm DIN Rail
Part Number Type
90.290
KO4763A
0.8Nm
Max. PCB’s:
Flammability Rating:
Mounting:
UL94 V-O (V-2 clear panel)
Recommended Torque:
Temperature Range:
(2) Vertical
(1) Horizontal
Color:
M3.5
Cover Material:
Max. PCB’s:
Flammability Rating:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Box Clamp
Housing Material:
M3.5
Cover Material:
Terminal Type:
16A, 300V, 22-12 AWG
ORDERING INFORMATION
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Machine
Solderable Pins
Machine
Solderable Pins
Machine
Solderable Pins
Part Number Type
90.300
KO4763B
90.301
KO4763B
90.302
KO4763B
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Wire
Jumper
Wire
Jumper
Wire
Jumper
Part Number
2511120/1M
Type
TS35x7.5/1M
ACCESSORIES
ACCESSORIES
Part Number
2511120/1M
120
108
1
2
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
(To convert to inches divide by 25.4.)
120
108
1
2
5
58
64
70
58
64
70
73
5
2.5
PCB DRAWING
2
37.8
34.4
1
5
55.8
1.5 thick
40
43
2.5
34.4
5
55.8
32.4
2.5
39.5
2
5.4
1.5 thick
1.5 thick
91
91
1.5 thick
1.5 thick
121
(To convert to inches divide by 25.4.)
37.8
Ø1
Ø1
5.4
79.5
107.5
Ø2
Ø2
32.4
2.5
PCB DRAWING
(To convert to inches divide by 25.4.)
1.5
4
1
DIN Rail
79.5
107.5
DIN Rail
33
41
45
121
1.5
4
2.5
33
41
45
2.5
63
65.4
1.5 thick
unused space
40
43
63
65.4
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
44
39.5
ENCLOSURE DRAWING
Accessories
1 Meter DIN Rail
Type
TS35x7.5/1M
73
Accessories
1 Meter DIN Rail
KO4700 Enclosure Series
16 Terminal
20 Terminal
Pluggable
Connection
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
10A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polycarbonate
Up to 125°C (257°F)
Glass-filled Polycarbonate
Up to 125°C (257°F)
90.322
KO4763P
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
ORDERING INFORMATION
KO4763P
Mounting:
UL94 V-O (V-2 clear panel)
Black Housing with Tan Cover
90.321
(5) Vertical
(1) Horizontal behind cover
Color:
35mm DIN Rail
Part Number Type
90.320
KO4763P
0.8Nm
Max. PCB’s:
Flammability Rating:
Mounting:
UL94 V-O (V-2 clear panel)
Recommended Torque:
Temperature Range:
(2) Vertical
(1) Horizontal
Color:
M3.5
Cover Material:
0.8Nm
Max. PCB’s:
Flammability Rating:
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Pressure Plate
Housing Material:
M3.5
Cover Material:
Terminal Type:
10A, 300V, 22-14 AWG
ORDERING INFORMATION
Description
Solid Cover
PCB Connection
Card Edge
Part Number Type
90.350
KO4718P
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
Card Edge
90.351
KO4718P
Card Edge
90.352
KO4718P
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
ACCESSORIES
ACCESSORIES
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 2)
ENCLOSURE DRAWING
120
108
63
118
107
1
10
73
73
2.5
3
58
64
70
58
64
70
1
(To convert to inches divide by 25.4.)
21
Part Number
2511120/1M
90
80
Accessories
1 Meter DIN Rail
2
2.5
121
100
PCB DRAWING
(To convert to inches divide by 25.4.)
41
37.8
2
94
DIN Rail
(To convert to inches divide by 25.4.)
1
2
3
5.4
77.4
4
32
26
92.5
96.5
8.6
1.5 thick
90.5
88.5
3
3
10°
3.5
1.5
40
43
unused space
1.5 thick
1.5 thick
3.5
1.5 thick
82.5
107
Ø3.2
min.5
121
85
91
1
2.5
DIN Rail
min 5
PCB DRAWING
2.5
33
41
45
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
45
KO4700 Enclosure Series
22 Terminal
Solder
Connection
TECHNICAL INFORMATION
Electrical:
16A, 300V, 22-12 AWG
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Terminal Type:
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
38
Recommended Torque:
Glass-filled Polycarbonate
21
Cover Material:
0.8Nm
UL94 V-O (V-2 Clear Panel)
Color:
Black Housing with Tan Cover
Mounting:
35mm DIN Rail or
optional panel mounting*
69
ORDERING INFORMATION
Part Number Type
90.380
KO4713A
90.381
KO4713A
90.382
KO4713A
70
(5) Vertical
(1) Behind cover
90
80
Up to 125°C (257°F)
Flammability Rating:
64
Max. PCB’s:
58
Temperature Range:
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
75
PCB Connection
Machine
Solderable Pins
Machine
Solderable Pins
Machine
Solderable Pins
118
1
107
10
2
Type
TS35x7.5/1M
PMA
2.5
2.5
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
72
3
ACCESSORIES
121
DIN Rail
PCB DRAWING
1
(To convert to inches divide by 25.4.)
2
54
3
67.5
66
60
26
32
Ø2
Ø1
5.4
1.5
4
37.8
107
90.5
1.5 thick
1.5 thick
1.5 thick
Ø3.2
57.5
71.5
1.5
unused space
unused space
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
46
KO4700 Enclosure Series
22 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Terminal Type:
10A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
38
Recommended Torque:
Glass-filled Polycarbonate
21
Cover Material:
0.8Nm
Temperature Range:
Max. PCB’s:
70
64
Mounting:
UL94 V-O (V-2 clear panel)
Color:
58
(5) Vertical
(1) Behind cover
90
80
Up to 125°C (257°F)
Flammability Rating:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
ORDERING INFORMATION
Part Number Type
90.410
KO4713P
90.411
KO4713P
90.412
KO4713P
Description
Solid Cover
PCB Connection
Card Edge
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
Card Edge
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
69
75
118
1
Card Edge
107
10
ACCESSORIES
3
73
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 2)
2
2.5
2.5
121
DIN Rail
(To convert to inches divide by 25.4.)
1
2.2
3
67.5
66
60
32
5.4
min. 5
2
54
26
PCB DRAWING
88
107
1.5 thick
1.5 thick
1.5 thick
Ø3.2
57.5
71.5
unused space
1.5
unused space
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
47
KO4700 Enclosure Series
30 Terminal
Solder
Connection
TECHNICAL INFORMATION
Electrical:
16A, 300V, 22-12 AWG
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Terminal Type:
Box Clamp
63
Terminal Screw Size:
Glass-filled Polycarbonate
21
Housing Material:
M3.5
Cover Material:
Recommended Torque:
Up to 125°C (257°F)
90
Max. PCB’s:
(5) Vertical
(1) Behind Cover
Flammability Rating:
58
64
70
0.8Nm
Temperature Range:
80
Glass-filled Polycarbonate
Mounting:
UL94 V-O (V-2 clear panel)
Color:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
94
ORDERING INFORMATION
Part Number Type
90.440
KO4717A
90.441
KO4717A
90.442
KO4717A
100
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Machine
Solderable Pins
Machine
Solderable Pins
Machine
Solderable Pins
118
107
1
10
3
ACCESSORIES
72
2
Type
TS35x7.5/1M
PMA
2.5
2.5
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
121
DIN Rail
PCB DRAWING
1
(To convert to inches divide by 25.4.)
2
75.6
3
92.5
91
85
32
26
1.5
4
59.4
107
1.5 thick
90.5
Ø2
Ø1
5.4
1.5 thick
Ø3.2
1.5 thick
3
7
96.5
1.5
3.5
3.5
3
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
48
KO4700 Enclosure Series
30 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
10A, 300V, 22-12 AWG
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Terminal Type:
Box Clamp
63
Terminal Screw Size:
Glass-filled Polycarbonate
21
Housing Material:
M3.5
Cover Material:
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
(5) Vertical
(1) Behind Cover
58
64
70
Up to 125°C (257°F)
Flammability Rating:
80
Max. PCB’s:
90
Temperature Range:
Mounting:
UL94 V-O (V-2 clear panel)
Color:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
94
ORDERING INFORMATION
Part Number Type
90.470
KO4717P
90.471
KO4717P
90.472
KO4717P
100
Description
Solid Cover
PCB Connection
Card Edge
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
Card Edge
118
107
1
10
Card Edge
3
ACCESSORIES
2
Type
TS35x7.5/1M
PMA
73
Part Number
2511120/1M
93.001.2
2.5
2.5
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 2)
121
DIN Rail
1
(To convert to inches divide by 25.4.)
75.6
2.2
3
92.5
91
85
32
26
5.4
2
min.5
PCB DRAWING
88
107
1.5 thick
1.5 thick
Ø3.2
1.5 thick
3
7
96.5
1.5
3.5
3.5
3
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
49
KO4700 Enclosure Series
32 Terminal
Pluggable and
Solder Connection
ENCLOSURE DRAWING
TECHNICAL INFORMATION
Electrical:
(To convert to inches divide by 25.4.)
Terminal Type:
10A, 300V, 22-14 AWG
Screw/ Pressure Plate
Housing Material:
Terminal Screw Size:
M3.5
100
21
Glass-filled Polycarbonate
Cover Material:
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
UL94 V-O (V-2 clear panel)
70
64
58
(5) Vertical
(1) Behind cover
(1) Base Mount
90
Up to 125°C (257°F)
Flammability Rating:
44
Max. PCB’s:
80
Temperature Range:
Mounting:
Color:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
50
143
ORDERING INFORMATION
90.501
KO4719P
90.502
KO4719P
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
118
107
1
10
4
ACCESSORIES
3
73
Part Number Type
90.500
KO4719P
152
2
Part Number
2511120/1M
93.001.2
2.5
Type
TS35x7.5/1M
PMA
2.5
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
121
DIN Rail
(To convert to inches divide by 25.4.)
129
4
2
144.4
3
1.5 thick
3
1.5
3
32
26
143
137
4
50
3.5
50
134
149
3.5
t=1.5
b 107
b 90
a 86
8.6
a 103
1
min.5
PCB DRAWING
134
124
64
44
1.5 thick
Ø3.2
1.5 thick
Ø2.5
Ø5
50
3
unused space
a with base mount PCB
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
50
KO4700 Enclosure Series
42 Terminal
Pluggable and
Solder Connection
TECHNICAL INFORMATION
Electrical:
10A, 300V, 22-14 AWG
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
Terminal Type:
Screw/ Pressure Plate
Housing Material:
Terminal Screw Size:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
130
0.8Nm
Temperature Range:
8.6
Max. PCB’s:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
ORDERING INFORMATION
Part Number Type
90.530
KO4720P
90.531
KO4720P
90.532
KO4720P
125
Description
Solid Cover
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
PCB Connection
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
Card Edge/
Wire Jumper
10
3
Type
TS35x7.5/1M
PMA
2.5
2.5
Part Number
2511120/1M
93.001.2
73
2
121
(To convert to inches divide by 25.4.)
2
3
191.5
191
185
4
107
t=1.5
1.5 thick
90
1.5 thick
26
32
184.6
172
17
min.5
1
118
107
1
DIN Rail
PCB DRAWING
194
200
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
70
58
Mounting:
UL94 V-O (V-2 clear panel)
Color:
64
(5) Vertical
(1) Behind cover
Flammability Rating:
90
80
54
Up to 125°C (257°F)
21
Glass-filled Polycarbonate
Cover Material:
3.2
3.5
1.5
125
3
1.5
125
3
3.5
unused space
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
51
KO4700 Enclosure Series
42 Terminal
Pluggable and
Solder Connection
ENCLOSURE DRAWING
TECHNICAL INFORMATION
Electrical:
(To convert to inches divide by 25.4.)
Terminal Type:
Screw/ Pressure Plate
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
130
M3.5
Cover Material:
21
10A, 300V, 22-14 AWG
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Up to 125°C (257°F)
(11) Vertical
(1) Base Mount
Flammability Rating:
46
68
86
98
108
114
120
Max. PCB’s:
140
130
Temperature Range:
Mounting:
UL94 V-O
Color:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
194
200
ORDERING INFORMATION
Part Number Type
90.560 KO4722SP
Description
Solid Cover
118
107
2
PCB Connection
Card Edge/
Wire Jumper
4
ACCESSORIES
Type
TS35x15/1M
PMA
3
2.5
Part Number
CA701/15-S
93.001.2
123
5
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
DIN Rail
4
191.5
1.5 thick
2.5
¨
¨
2.5
a 86
b 90
1.5 thick
3
b 107
184.6
172
17.2
a 103
2
(To convert to inches divide by 25.4.)
min.5
PCB DRAWING
129
1.5
1.5
5
4
181.5
164
191.5
2.
Ø
¨
2.5
57
113
98
b 100
1.5 thick
5
a 96
5
1.5
.
Ø2
Ø5 1.5 thick
Ø5
unused space
2.5
a with base mount PCB
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
52
KO4700 Enclosure Series
50 Terminal
Solder
Connection
TECHNICAL INFORMATION
Electrical:
ENCLOSURE DRAWING
16A, 300V, 22-12 AWG
Box Clamp
Housing Material:
Terminal Screw Size:
100
M3.5
Cover Material:
21
Glass-filled Polycarbonate
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Max. PCB’s:
(5) Vertical
(1) Behind Cover
(1) Base Mount
UL94 V-O (V-2 Clear Panel)
90
80
Up to 125°C (257°F)
Flammability Rating:
44
58
64
70
Temperature Range:
Mounting:
Color:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
50
152
ORDERING INFORMATION
90.592
Description
Solid Cover
KO4716A
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
KO4716A
118
107
1
PCB Connection
Machine
Solderable Pins
Machine
Solderable Pins
Machine
Solderable Pins
147
10
4
3
2
73
Part Number Type
90.590
KO4716A
90.591
(To convert to inches divide by 25.4.)
Terminal Type:
2.5
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
PCB DRAWING
Part Number
2511120/1M
93.001.2
2.5
ACCESSORIES
DIN Rail
Type
TS35x7.5/1M
PMA
121
(To convert to inches divide by 25.4.)
1
129.6
2
144.4
a 86
b 90
1.5 thick
1.5 thick
3
50
1.5
134
3.5
3
3.5
50
a 103
b 107
1.5
5.4
2
Ø
Ø
1
4
70.2
148.8
32
26
143
137
1.5 thick
4
134
124
64
44
3
1.5 thick
Ø3.2
unused space
Ø2.5
Ø5
50
3
a with base mount PCB
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
53
KO4700 Enclosure Series
50 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
10A, 300V, 22-12 AWG
ENCLOSURE DRAWING
Box Clamp
Housing Material:
Terminal Screw Size:
100
M3.5
Cover Material:
21
Glass-filled Polycarbonate
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Up to 125°C (257°F)
(5) Vertical
(1) Behind cover
(1) Base Mount
Flammability Rating:
UL94 V-O (V-2 Clear Panel)
Mounting:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
50
152
ORDERING INFORMATION
Part Number Type
90.620
KO4716P
KO4716P
KO4716P
Description
Solid Cover
PCB Connection
Card Edge
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
Card Edge
118
107
1
10
4
3
2
Card Edge
2.5
DIN Rail
Type
TS35x7.5/1M
PMA
121
1
min. 5
(To convert to inches divide by 25.4.)
129.6
144.4
1.5 thick
a 103
b 107
a
1.5 thick
84
2.2
88
5.4
2
b
PCB DRAWING
Part Number
2511120/1M
93.001.2
2.5
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
147
73
Color:
90.622
44
58
64
70
Max. PCB’s:
90
80
Temperature Range:
90.621
(To convert to inches divide by 25.4.)
Terminal Type:
3
1.5
50
134
148.8
3
4
3.5
50
3.5
3
134
124
32
26
64
44
143
137
1.5 thick
1.5 thick
unused space
a with base mount PCB
Ø3.2
Ø2.5
Ø5
50
3
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
54
KO4700 Enclosure Series
66 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
ENCLOSURE DRAWING
Box Clamp
Terminal Screw Size:
Glass-filled Polycarbonate
130
M3.5
Cover Material:
Recommended Torque:
0.8Nm
Max. PCB’s:
Up to 125°C (257°F)
90
80
Temperature Range:
(5) Vertical
(1) Behind cover
Flammability Rating:
58
64
70
Glass-filled Polycarbonate
Mounting:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
125
ORDERING INFORMATION
Part Number Type
90.680
KO4721P
KO4721P
PCB Connection
Card Edge
Removable Cover
Panel, Tan
Removable Cover
Panel, Clear
Card Edge
10
3
2
2.5
Card Edge
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
1
Type
TS35x7.5/1M
PMA
121
DIN Rail
(To convert to inches divide by 25.4.)
172.7
2.2
2
191.5
107
89
5.4
Part Number
2511120/1M
93.001.2
min. 5
PCB DRAWING
118
107
1
2.5
KO4721P
Description
Solid Cover
194
200
73
UL94 V-O (V-2 Clear Panel)
Color:
90.682
21
10A, 300V, 22-12 AWG
Housing Material:
90.681
(To convert to inches divide by 25.4.)
Terminal Type:
1.5 thick
3.5
3.5
1.5
unused space
125
3
125
184.6
3
1.5
1.5 thick
3
32
26
191
185
1.5 thick
Ø3.2
unused space
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
55
KO4700 Enclosure Series
66 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
ENCLOSURE DRAWING
Terminal Type:
130
Box Clamp
21
10A, 300V, 22-12 AWG
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
Glass-filled Polycarbonate
0.8Nm
Temperature Range:
Max. PCB’s:
Up to 125°C (257°F)
46
68
86
98
108
114
120
Recommended Torque:
140
130
Cover Material:
(11) Vertical
(1) Base Mount
Flammability Rating:
Mounting:
UL94 V-O
Color:
200
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
Description
Solid Cover
6
PCB Connection
Card Edge
5
123
Part Number Type
90.710 KO4723SP
3
ACCESSORIES
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
2.5
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
194
118
107
1
ORDERING INFORMATION
DIN Rail
129
(To convert to inches divide by 25.4.)
min.5
184.6
172.7
191.5
5.4
1.5 thick
1.5 thick
¨
2.5
¨
2.5
a 85
b 89
2.2
3
b 107
1
a 103
PCB DRAWING
(To convert to inches divide by 25.4.)
1.5
1.5
5
6
181.5
164
191.5
5
Ø5
1.5 thick
a 122
b 126
57
113
98
5
2.
Ø
.
Ø2
1.5 thick
¨
2.5
Ø5
unused space
2.5
a with base mount PCB
1.5
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
56
KO4700 Enclosure Series
84 Terminal
Pluggable and
Solder Connection
ENCLOSURE DRAWING
Terminal Type:
10A, 300V, 22-14 AWG
Screw / Pressure Plate
Housing Material:
130
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
Recommended Torque:
0.8Nm
140
130
Glass-filled Polycarbonate
Temperature Range:
Max. PCB’s:
Up to 125°C (257°F)
(11) Vertical
(1) Base Mount
Flammability Rating:
Mounting:
Part Number Type
90.740 KO4722DP
Description
Solid Cover
PCB Connection
Card Edge/
Wire Jumper
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab (need 3)
126
147
¨
2.5
¨
1.5
1.5 thick
2.5
1.5 thick
2.5
t=1.5
4
191.5
b 100
min. 5
4
4
184.6
172
17.2
a 96
2
min.5
180
172
7.5
DIN Rail
(To convert to inches divide by 25.4.)
.5
R1
b 110
Type
TS35x15/1M
PMA
a 86
b 90
1
Part Number
CA701/15-S
93.001.2
137
118
2
4
1
7
5
6
ORDERING INFORMATION
194
83
123
Black Housing with Tan Cover
200
35mm DIN Rail or
optional panel mounting*
2.5
UL94 V-O
Color:
a 106
46
68
86
98
108
114
120
Cover Material:
PCB DRAWING
(To convert to inches divide by 25.4.)
21
TECHNICAL INFORMATION
Electrical:
1.5
191.5
1.5
7
6
181.5
164
b 126
57
Ø5 1.5 thick
a 122
5
a 110
b 114
.5
Ø2
2.
Ø
113
98
191.5
191.5
1.5 thick
Ø5
2.5
5
2.5
¨
1.5 thick
2.5
1.5
1.5
unused space
a with base mount PCB
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
57
KO4700 Enclosure Series
132 Terminal
Pluggable
Connection
TECHNICAL INFORMATION
Electrical:
ENCLOSURE DRAWING
Terminal Type:
130
Box Clamp
Housing Material:
21
10A, 300V, 22-12 AWG
Terminal Screw Size:
Glass-filled Polycarbonate
M3.5
Glass-filled Polycarbonate
0.8Nm
Temperature Range:
Max. PCB’s:
Up to 125°C (257°F)
46
68
86
98
108
114
120
Recommended Torque:
140
130
Cover Material:
(11) Vertical
(1) Base Mount
Flammability Rating:
Mounting:
1
4
2
7
5
6
ORDERING INFORMATION
Part Number Type
90.770 KO4723DP
Description
Solid Cover
PCB Connection
Card Edge
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
CA701/15-S
*Panel Mount Tab (need 3)
93.001.2
137
118
Type
TS35x15/1M
PMA
DIN Rail
83
123
Black Housing with Tan Cover
194
200
35mm DIN Rail or
optional panel mounting*
2.5
UL94 V-O
Color:
126
147
(To convert to inches divide by 25.4.)
172.7
5.4
5.4
191.5
2.5
a 96
1.5 thick
¨
1.5
¨
2.5
¨
a 104.5
1.5 thick
b 100
1.5 thick
5
2.5
4
.
R1
a 85
b 89
2.2
191.5
180
172.7
2.2
2
min. 5
min.5
184.6
7.5
1
b 108.5
PCB DRAWING
(To convert to inches divide by 25.4.)
1.5
1.5
5
6
181.5
164
7
191.5
191.5
5
1.5 thick
2.5
¨
¨
Ø5
2.5
b 114
1.5 thick
1.5 thick
2.5
Ø5
a 110
a 122
b 126
57
113
98
5
2.
Ø
.
Ø2
1.5
1.5
unused space
a with base mount PCB
b without base mount PCB
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
58
KO4700 Enclosure Series - Modular
6 Terminal
with 6 High Current Terminals
Solder Connection
TECHNICAL INFORMATION
Electrical:
40A, 300V, 18-8 AWG
Terminal Type:
Box Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Cover Material:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
Temperature Range:
0.8Nm
Max. PCB’s:
Up to 125°C (257°F)
(2) Vertical
(2) Horizontal
Flammability Rating:
Mounting:
UL94 V-O
Color:
Black Housing with Tan Cover
35mm DIN Rail or
optional panel mounting*
ENCLOSURE DRAWING
ORDERING INFORMATION
Part Number
90.815
Type
KO4734
(To convert to inches divide by 25.4.)
Description
Removable High Current
Wire Jumper Terminals
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
22.5
A
2
3
76
1.7
84
1
DIN Rail
A
109
118
121
20.8
2
3
64.2
29.6
77.9
29.6
R1
107
65
R1
65
1.5 thick
1.5 thick
107
1
(To convert to inches divide by 25.4.)
65
PCB DRAWING
1.5 thick
18
unused space
76
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
59
KO4700 Enclosure Series - Modular
14 Terminal Maximum
Pluggable Card Edge
Connection
TECHNICAL INFORMATION
Electrical:
see chart for Amperages,
300V, 22-12 AWG
COMPLETE ENCLOSURE CONSISTS OF
(1) Base Housing
(1) Cover Frame
(1) Cover Panel
(2) Terminal or blanking blocks
Terminal Type:
Box clamp
Terminal Screw Size:
Housing Material:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
Cover Material:
0.8Nm
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
(2) Vertical
(2) Horizontal
Up to 125°C (257°F)
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
Color:
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
ENCLOSURE DRAWING
ORDERING INFORMATION
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
Part Number
2511120/1M
93.001.2
A
2
2b
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab
22.5
1.7
Type
TS35x7.5/1M
PMA
DIN Rail
1.8
2.8
14.8
AMPERAGE CHART
1
84
94
90.803
90.804
90.807
90.800
A-A
15.8
14.8
1.7
KO4730P-C/S
(To convert to inches divide by 25.4.)
76
90.810.5
Description
Base Housing
Cover Frame
Cover Panel, Tan
Cover Panel, Clear
Cover Panel with terminal
release slots, Tan
Cover Panel with terminal
release slots, Clear
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
69.5
Type
KO4730H
KO4730F
KO4730P
KO4730P-C
KO4730P/S
4.4
3.8
Part Number
90.810
90.810.1
90.810.2
90.810.3
90.810.4
A
Inner Surface
118
121
Outer Surface
Max. Current Carrying Capacity of Terminal Blocks
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
4 pole
15A
28A
5A
8A
7 pole
15A top row
28A bottom row
5A top row
8A bottom row
1
20.8
16.2
5.4
1.5
2b
64.2
32.5
28
78
33
28
106
1.5 thick
1
5
1.5 thick
65.5
106
18
Inner Surface
1.5
10.8
R1
R1
1.5
thick
65.5
72.3
5
1
Outer Surface
2
5
(To convert to inches divide by 25.4.)
5
PCB DRAWING
3 pole
unused space
76
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
60
KO4700 Enclosure Series - Modular
20 Terminal Maximum
with 6 High Current Terminals
Pluggable Card Edge
Connection/ Solder Connection
TECHNICAL INFORMATION
Electrical:
see chart for Amperages,
300V, 22-12 AWG standard
18-8 AWG high current
COMPLETE ENCLOSURE CONSISTS OF
(1) Base Housing
(1) Center Cover
(2) Terminal or blanking blocks
(2) High current terminal blocks
Terminal Type:
Box clamp
Terminal Screw Size:
M3.5
Housing Material:
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Cover Material:
Max. PCB’s:
Glass-filled Polycarbonate
(2) Vertical
(2) Horizontal
Temperature Range:
Up to 125°C (257°F)
Mounting:
Flammability Rating:
35mm DIN Rail or
optional panel mounting*
UL94 V-O (V-2 Clear Panel)
Color:
Black Housing with Tan Cover
ENCLOSURE DRAWING
ORDERING INFORMATION
A
2
84
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
KO473xHCT
1a
2b
86
90.803
90.804
90.807
90.800
90.808
45
A-A
76
KO4731/5P-C/S
1.7
90.820.5
Description
Base Housing
Cover Frame
Cover Panel, Tan
Cover Panel, Clear
Cover Panel with terminal
release slots, Tan
Cover Panel with terminal
release slots, Clear
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
High Current Block, 3 terminals
69.5
Type
KO4735H
KO4735F
KO4731/5P
KO4731/5P-C
KO4731/5P/S
4.4
Part Number
90.825
90.825.1
90.820.2
90.820.3
90.820.4
(To convert to inches divide by 25.4.)
ACCESSORIES
Accessories
1 Meter DIN Rail
*Panel Mount Tab
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
3
36
1.7
41
DIN Rail
1b
A
Inner Surface
Outer Surface
AMPERAGE CHART
108
118
121
Max. Current Carrying Capacity of Terminal Blocks
3 pole
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
8A
5.85
1.5
High Current
15A top row
28A 28A bottom row
5A top row
8A 8A bottom row
40A
40A
(To convert to inches divide by 25.4.)
42.7
1a
7 pole
1b
2
42.7
Outer surface
2b
64.2
32.5
28
3.15
1.5
77.9
29.6
6
5
5
1.5
1.5
PCB DRAWING
15A
4 pole
65
40.7
1.5 thick
40.7
107
1.5 thick
1.5 thick
65
107
1.5 thick
R1
R1
72.3
3x5.4=16.2
65
65
72.3
2x5.4=10.8
Inner Surface
Inner surface
3x5.4=16.2
2x5.4=10.8
Outer Surface
1.5
3.15
1.5
1.5
5
5
76
1.5
unsued space
5.85
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
61
KO4700 Enclosure Series - Modular
28 Terminal Maximum
Pluggable Card Edge
Connection
TECHNICAL INFORMATION
Electrical:
see chart for Amperages,
300V, 22-12 AWG
COMPLETE ENCLOSURE CONSISTS OF
(1) Base Housing
(1) Cover Frame
(1) Cover Panel
(4) Terminal or blanking blocks
Terminal Type:
Box clamp
Terminal Screw Size:
Housing Material:
M3.5
Glass-filled Polycarbonate
Recommended Torque:
Cover Material:
0.8Nm
Glass-filled Polycarbonate
Max. PCB’s:
Temperature Range:
(2) Vertical
(2) Horizontal
Up to 125°C (257°F)
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
35mm DIN Rail or
optional panel mounting*
Color:
Black Housing with Tan Cover
ENCLOSURE DRAWING
Description
Base Housing
Cover Frame
Cover Panel, Tan
Cover Panel, Clear
Cover Panel with terminal
release slots, Tan
KO4731/5P-C/S Cover Panel with terminal
release slots, Clear
KO473xT/3
Terminal Block, 3 terminals
KO473xT/4
Terminal Block, 4 terminals
KO473xT/7
Terminal Block, 7 terminals
KO473xT/B
Blanking Block, 0 terminals
2a
A
65.2
90.803
90.804
90.807
90.800
2b
DIN Rail
1
1.7
90.820.5
(To convert to inches divide by 25.4.)
84
94
Type
KO4731H
KO4731F
KO4731/5P
KO4731/5P-C
KO4731/5P/S
76
Part Number
90.820
90.820.1
90.820.2
90.820.3
90.820.4
86
ORDERING INFORMATION
ACCESSORIES
A
1.7
41
121
A-A
Part Number
2511120/1M
93.001.2
Type
TS35x7.5/1M
PMA
4.4
69.5
Accessories
1 Meter DIN Rail
*Panel Mount Tab
118
Inner
surface
AMPERAGE CHART
Max. Current Carrying Capacity of Terminal Blocks
3 pole
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
15A
28A
5A
8A
3
7 pole
36
15A top row
28A bottom row
5A top row
8A bottom row
Outer
surface
(To convert to inches divide by 25.4.)
38.7
2x16.2
5.4
2a
1.5
64.2
2b
64.2
32.5
28
6.3
72.3
1
5
Outer Surface
1.5 thick
106
1
5
PCB DRAWING
4 pole
R1
1.5 thick
Inner Surface
11.7
65.5
5
1.5 thick
1
10.8
5.4
106
40.7
42.7
1.5
33.3
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
62
KO4700 Enclosure Series - Modular
34 Terminal Maximum
with 6 High Current Terminals
Pluggable Card Edge
Connection/ Solder Connection
COMPLETE ENCLOSURE CONSISTS OF
TECHNICAL INFORMATION
Electrical:
(1) Base Housing
(1) Center Cover
(4) Terminal or blanking blocks
(2) High current terminal blocks
Terminal Type:
see chart for Amperages,
300V, 22-12 AWG standard
18-8 AWG high current
Box clamp
Terminal Screw Size:
M3.5
Housing Material:
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Cover Material:
Max. PCB’s:
Glass-filled Polycarbonate
(3) Vertical
(2) Horizontal
(1) Parallel with cover
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
35mm DIN Rail or
optional panel mounting*
Color:
Black Housing with Tan Cover
ENCLOSURE DRAWING
ORDERING INFORMATION
Description
Base Housing
Center Cover
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
High Current Block, 3 terminals
(To convert to inches divide by 25.4.)
67.5
A
DIN Rail
84
Type
KO4732/6H
KO4736F
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
KO473xHCT
86
A
ACCESSORIES
2
Type
TS35x7.5/1M
PMA
27.5
1b
AMPERAGE CHART
Max. Current Carrying Capacity of Terminal Blocks
4 pole
7 pole
1a
8A
15A top row
28A 28A bottom row
5A top row
8A 8A bottom row
40A
Outer
surface
64.6
40A
(To convert to inches divide by 25.4.)
1.5
unused space
2X5.4=10.8
5
29.8
1.5 thick
R1
65
1.5 thick
25
65
51.5
48.5
25
30
65
1.5 thick
75.6
11.7
64.2
32.5
28
72.3
107
4.5
64.2
2
65.8
107
1a
1.5
5
29.6
1
1.9
Inner
surface
63.5
2.3
21.6
1.5
6.3
3X5.4=16.2
1.5
5
1b
15A
Inner
surface
High Current
1.8
PCB DRAWING
1
1.7
3 pole
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
3
A-A
76
67.4
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
107
118
121
6
Part Number
90.830
90.830.6
90.803
90.804
90.807
90.800
90.808
Outer
surface
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
63
KO4700 Enclosure Series - Modular
40 Terminal Maximum
with 12 High Current Terminals
Pluggable Card Edge
Connection/ Solder Connection
COMPLETE ENCLOSURE CONSISTS OF
TECHNICAL INFORMATION
Electrical:
(1) Base Housing
(1) Center Cover
(4) Terminal or blanking blocks
(4) High current terminal blocks
Terminal Type:
see chart for Amperages,
300V, 22-12 AWG standard
18-8 AWG high current
Box clamp
Terminal Screw Size:
M3.5
Housing Material:
Recommended Torque:
Glass-filled Polycarbonate
0.8Nm
Cover Material:
Max. PCB’s:
Glass-filled Polycarbonate
(4) Vertical
(2) Horizontal
(1) Parallel with cover
Temperature Range:
Up to 125°C (257°F)
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
35mm DIN Rail or
optional panel mounting*
Color:
Black Housing with Tan Cover
ENCLOSURE DRAWING
Description
Base Housing
Center Cover
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
High Current Block, 3 terminals
90
52.5
DIN Rail
A
10
A
2
ACCESSORIES
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
1b
Type
TS35x7.5/1M
PMA
76
63.5
Max. Current Carrying Capacity of Terminal Blocks
7 pole
Inner
surface
1a
High Current
2
4 pole
3
1
AMPERAGE CHART
3 pole
A-A
108
118
121
86
40A
29.6
1a
2
87.7
2X5.4=10.8
11.7
1.5
1.5 thick
R1
25
65
51.5
25
48.5
1.5 thick
Inner
surface
85.5
1.8
29.8
30
65
1.5 thick
67.4
75.6
4.7
1.5
5
107
4.5
64.2
32.5
28
107
1
6
(To convert to inches divide by 25.4.)
43.9
65
1b
8A
Outer
surface
40A
72.3
PCB DRAWING
15A
15A top row
28A 28A bottom row
5A top row
8A 8A bottom row
1.5
5
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
unused space
1.5
6.3
2
Outer
surface
3X5.4=16.2
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
64
84
Type
KO4737H
KO4737F
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
KO473xHCT
(To convert to inches divide by 25.4.)
86
Part Number
90.845
90.845.6
90.803
90.804
90.807
90.800
90.808
1.7
ORDERING INFORMATION
KO4700 Enclosure Series - Modular
42 Terminal Maximum
Pluggable Card Edge
Connection
COMPLETE ENCLOSURE CONSISTS OF
TECHNICAL INFORMATION
Electrical:
(1) Base Housing
(1) Cover Frame
(1) Cover Panel
(6) Terminal or blanking blocks
Terminal Type:
see chart for Amperages,
300V, 22-12 AWG
Box clamp
Terminal Screw Size:
Housing Material:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
Cover Material:
0.8Nm
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
(3) Vertical
(2) Horizontal
(1) Parallel with cover
Up to 125°C (257°F)
Flammability Rating:
Mounting:
UL94 V-O (V-2 Clear Panel)
35mm DIN Rail or
optional panel mounting*
Black Housing with Tan Cover
ENCLOSURE DRAWING
ORDERING INFORMATION
KO4732P-C/S
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
67.5
44
65.8
A-A
Type
TS35x7.5/1M
PMA
69.5
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
Max. Current Carrying Capacity of Terminal Blocks
3 pole
4 pole
15A
28A
5A
8A
Outer
surface
15A top row
28A bottom row
5A top row
8A bottom row
Outer Surface
64.2
32.5
28
3
72.3
6.3
1.5 thick
1.5 thick
R1
2x11.7
3x10.8
1.5
55.8
1
5
Inner Surface
1.5 thick
65.5
107
63.8
65.8
5.4
64.2
6
2
3x16.2
5.4
6.3
7 pole
(To convert to inches divide by 25.4.)
61.2
1
108
118
121
Inner
surface
4.4
AMPERAGE CHART
PCB DRAWING
3
1
A
2
ACCESSORIES
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
A
DIN Rail
64
90.803
90.804
90.807
90.800
(To convert to inches divide by 25.4.)
86
90.830.5
Description
Base Housing
Cover Frame
Cover Panel, Tan
Cover Panel, Clear
Cover Panel with terminal
release slots, Tan
Cover Panel with terminal
release slots, Clear
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
2
Type
KO4732/6H
KO4732F
KO4732P
KO4732P-C
KO4732P/S
76
65.2
Part Number
90.830
90.830.1
90.830.2
90.830.3
90.830.4
84
94
Color:
unused spaced
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
65
KO4700 Enclosure Series - Modular
56 Terminal Maximum
Pluggable Card Edge
Connection
TECHNICAL INFORMATION
Electrical:
see chart for Amperages,
300V, 22-12 AWG
COMPLETE ENCLOSURE CONSISTS OF
(1) Base Housing
(1) Cover Frame
(1) Cover Panel
(8) Terminal or blanking blocks
Terminal Type:
Box clamp
Terminal Screw Size:
Housing Material:
M3.5
Recommended Torque:
Glass-filled Polycarbonate
Cover Material:
0.8Nm
Max. PCB’s:
Glass-filled Polycarbonate
Temperature Range:
(4) Vertical
(2) Horizontal
(1ea.) Parallel with/
behind cover
Up to 125°C (257°F)
Flammability Rating:
UL94 V-O (V-2 Clear Panel)
Mounting:
35mm DIN Rail or
optional panel mounting*
ENCLOSURE DRAWING
Type
KO4733H
KO4733F
KO4733P
KO4733P-C
KO4733P/S
90.840.5
KO4733P-C/S
90.803
90.804
90.807
90.800
KO473xT/3
KO473xT/4
KO473xT/7
KO473xT/B
Description
Base Housing
Cover Frame
Cover Panel, Tan
Cover Panel, Clear
Cover Panel with terminal
release slots, Tan
Cover Panel with terminal
release slots, Clear
Terminal Block, 3 terminals
Terminal Block, 4 terminals
Terminal Block, 7 terminals
Blanking Block, 0 terminals
DIN Rail
90
52.5
A
3
76
63.5
Part Number
90.840
90.840.1
90.840.2
90.840.3
90.840.4
(To convert to inches divide by 25.4.)
1
108
2
A
ACCESSORIES
Max. Current Carrying Capacity of Terminal Blocks
4 pole
15A
28A
5A
8A
Max Amperage
of Terminal Blocks
Max Amperage
Per Terminal Point
1
2
6.3
6.3
64.2
32.5
20
82
75
1.5
78.3
32
26
106
1.5 thick
3x11.7
1.5 thick
3.2
1
5
5.4
1.5 thick
85
R1
85.5
87.5
Inner
Surface
4
64.2
6.3
1.5 thick
4x10.8
3
1
5
1.5
5.4
65.5
72.3
Outer
Surface
Outer
surface
15A top row
28A bottom row
5A top row
8A bottom row
(To convert to inches divide by 25.4.)
83.7
4x16.2
7 pole
8
PCB DRAWING
4
Inner
surface
4.4
AMPERAGE CHART
3 pole
118
121
A-A
Type
TS35x7.5/1M
PMA
69.5
Accessories
Part Number
1 Meter DIN Rail
2511120/1M
*Panel Mount Tab (need 2)
93.001.2
10
unused spaced
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
66
84
94
ORDERING INFORMATION
86
Black Housing with Tan Cover
1.7
Color:
KO4300 Enclosure Series
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to
medium in size ranging from 16 to 64 termnals. There are 4 widths available each having a short and tall version available.
MATERIALS
Housing Shell: Polycarbonate, 10% Glass Filled
Terminal Housing: Polyamide, 40% Glass Filled
Terminal: Tin-plated Steel
TEMPERATURE RATINGS:
Housing: 115°C (239°F) UL94VO
Terminal Housing: 290°C (554°F) UL94VO
Standard Color: Light Gray
PROTECTION
KO4300 series enclosures have an IP20 rating (finger protected) and meet VBG4 and other European accident prevention requirements.
CONSTRUCTION
The KO4300 enclosure series housings are supplied as unassembled kits. Each kit consists of a housing base, terminal cover side parts, terminal blocks
and a front plate. The double level terminal design keeps the enclosure width to a minimum freeing valuable DIN rail space. The terminals are machine
solderable with right angle pins. Integral printed circuit board guides are molded into the housing base to help with proper board insertion and
containment. Boards are mounted vertically in the enclosure, perpendicular to the DIN rail.
TERMINALS
Rising clamp screw terminals are used with the KO4300 series enclosures. Wires to be terminated are squeezed between the bottom of the rising clamp
and the terminal strip for reliable, gas-tight connections. The terminals can be machine soldered to the board in the same step as the other components to
save time and labor. All terminals have funnel shaped wire openings to eliminate wire fraying. The terminal screws can be turned with a flat tip or a #2
Philips screwdriver.
MOUNTING
The KO4300 series can easily be mounted on standard 35mm DIN rail by means of the integral mounting foot and DIN clip.
CUSTOMIZATION
Many custom options are available for the KO4300 series enclosures. Some of the available options are:
• Partial terminal loading
• Side ventilation slots
• Internal/External bus connections
• Machining of custom holes
• PCB grounding to the DIN rail
• RJ45 and DB9 openings in front plate
Side Parts
Terminal Block
PCB Assembly
(not included)
Front Plate
Shown KO4300 DIN Enclosure
16 Terminal, Vertical PCB
Base Housing
HOUSING ASSEMBLY
• Place all assemblies on a level surface
• Terminal blocks should be pre-assembled on the PCB
• Push the side parts over the terminal blocks ensuring that the guide pins of the terminal blocks slide into the holes of the side parts
• Snap the front plate onto the pre-mounted side parts
• Slide the PCB of the upper section into the guide groves of the base
• Slide the upper section into the base. Make sure that the wall areas overlap correctly and the guide element of the base slides
in the mating recess of the base.
• Push the assembly completely together so that the clips on the side parts snap into the recesses in the base
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
67
KO4300 Enclosure Series
16 Terminal
16 Terminal
Vertical PCB
Tall Vertical PCB
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Screw / Rising Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polyamide
0.8Nm
Recommended Torque:
Glass-filled Polyamide
0.8Nm
Temperature Range:
(2) Vertical
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Mounting:
Flammability Rating:
M3.5
Terminal Block Material:
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Rising Clamp
Housing Material:
M3.5
Terminal Block Material:
Terminal Type:
16A, 300V, 22-12 AWG
(2) Vertical
Mounting:
Flammability Rating:
35mm DIN Rail
UL94 V-O
35mm DIN Rail
UL94 V-O
Color: Light Gray
Color: Light Gray
ORDERING INFORMATION
Part Number Type
90.900
KO4323
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder
Part Number Type
90.910
KO4303
Description
Right Angle Pins
PCB Connection
Machine Solder
ACCESSORIES
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
DIN Rail
99.5
92
22.5
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
A-A
Accessories
1 Meter DIN Rail
Type
TS35x7.5/1M
22.5
A-A
A
121
113
A
16
16
35
90
35
90
2.4
2.4
1.5
1.5
A
A
Printed Circuit Board
Print area 20.5 x 43.6
PCB DRAWING
(To convert to inches divide by 25.4.)
(To convert to inches divide by 25.4.)
74.9
54.1
67.9
58.4
54.1
47.7
unused space,
no conducting material
38.2
38.2
5.2
33.9
1
4.6
16x1
1
1.5 thick
18.6
107
3x5=15
96
74.4
86
9.5
62.1
16x1
1.6
1.6
40.6
3x5=15
53.4
75
4.6
17.7
5
5
18.6
1.7
9.6
9.8
1
9.6
9.8
1
1.7
5.2
33.9
9.5
47.7
58.4
83.1
unused space,
no conducting material
74.9
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
1.6
67.9
1.6
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
61.6
PCB DRAWING
Print area 20.5 x 43.6
17.7
Printed Circuit Board
1.5 thick
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
68
KO4300 Enclosure Series
32 Terminal
32 Terminal
Vertical PCB
Tall Vertical PCB
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Screw / Rising Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polyamide
0.8Nm
Recommended Torque:
Glass-filled Polyamide
0.8Nm
Temperature Range:
(4) Vertical
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Mounting:
Flammability Rating:
M3.5
Terminal Block Material:
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Rising Clamp
Housing Material:
M3.5
Terminal Block Material:
Terminal Type:
16A, 300V, 22-12 AWG
(4) Vertical
Mounting:
Flammability Rating:
35mm DIN Rail
UL94 V-O
35mm DIN Rail
UL94 V-O
Color: Light Gray
Color: Light Gray
ORDERING INFORMATION
Part Number Type
90.920
KO4324
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder
Part Number Type
90.930
KO4304
Description
Right Angle Pins
ACCESSORIES
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Accessories
1 Meter DIN Rail
Type
TS35x7.5/1M
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
DIN Rail
A-A
21.1
99.5
92
45
121
113
A-A
16
A
21.1
45
A
2.4
35
90
35
2.4
1.5
90
1.5
A
PCB2
PCB DRAWING
(To convert to inches divide by 25.4.)
Print area 43.2 x 43.6
PCB1
(To convert to inches divide by 25.4.)
74.9
74.9
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
67.9
58.4
54.1
58.4
54.1
47.7
unused space,
no conducting material
47.7
38.2
38.2
5.2
33.9
9.8
1
9.6
1
16x1
1
1.5 thick
9.5
107
4.6
1.6
3x5=15
96
74.4
86
9.5
62.1
16x1
1.6
1.6
40.6
3x5=15
53.4
75
4.6
17.7
5
5
18.6
1.7
9.6
1
18.6
9.8
1.7
5.2
33.9
83.1
unused space,
no conducting material
67.9
1.6
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
17.7
PCB DRAWING
A
Print area 43.2 x 43.6
PCB1
PCB2
61.6
16
PCB Connection
Machine Solder
1.5 thick
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
69
KO4300 Enclosure Series
48 Terminal
48 Terminal
Vertical PCB
Tall Vertical PCB
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Screw / Rising Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polyamide
0.8Nm
Recommended Torque:
Glass-filled Polyamide
0.8Nm
Temperature Range:
(6) Vertical
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Mounting:
Flammability Rating:
M3.5
Terminal Block Material:
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Rising Clamp
Housing Material:
M3.5
Terminal Block Material:
Terminal Type:
16A, 300V, 22-12 AWG
(6) Vertical
Mounting:
Flammability Rating:
35mm DIN Rail
UL94 V-O
35mm DIN Rail
UL94 V-O
Color: Light Gray
Color: Light Gray
ORDERING INFORMATION
Part Number Type
90.940
KO4325
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder
Part Number Type
90.950
KO4305
Description
Right Angle Pins
PCB Connection
Machine Solder
ACCESSORIES
ACCESSORIES
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Accessories
1 Meter DIN Rail
Type
TS35x7.5/1M
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
A-A
Type
TS35x7.5/1M
(To convert to inches divide by 25.4.)
DIN Rail
A-A
99.5
92
67.5
34.7 21.1
121
113
67.5
34.7 21.1
A
A
1.5
1.5
90
90
35
35
2.4
2.4
PCB 3
PCB 3
PCB 2
PCB 2
A
PCB DRAWING
(To convert to inches divide by 25.4.)
Print area 61.5 x 43.6
(To convert to inches divide by 25.4.)
74.9
74.9
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
67.9
58.4
54.1
58.4
54.1
47.7
unused space,
no conducting material
47.7
38.2
38.2
5.2
33.9
9.8
1
9.6
1
16x1
1
1.5 thick
9.5
1.5 thick
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
70
107
4.6
1.6
3x5=15
96
74.4
86
9.5
62.1
16x1
1.6
1.6
40.6
3x5=15
53.4
75
4.6
17.7
5
5
18.6
1.7
9.6
1
18.6
9.8
1.7
5.2
33.9
83.1
unused space,
no conducting material
67.9
1.6
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
61.6
PCB DRAWING
A
PCB 1
Print area 61.5 x 43.6
17.7
PCB 1
KO4300 Enclosure Series
64 Terminal
64 Terminal
Vertical PCB
Tall Vertical PCB
TECHNICAL INFORMATION
Electrical:
TECHNICAL INFORMATION
Electrical:
Terminal Type:
16A, 300V, 22-12 AWG
Screw / Rising Clamp
Housing Material:
Terminal Screw Size:
Glass-filled Polycarbonate
Glass-filled Polyamide
0.8Nm
Glass-filled Polyamide
(8) Vertical
0.8Nm
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
(8) Vertical
Mounting:
Flammability Rating:
35mm DIN Rail
UL94 V-O
35mm DIN Rail
UL94 V-O
Color: Light Gray
Color: Light Gray
ORDERING INFORMATION
Part Number Type
90.960
KO4326
ORDERING INFORMATION
Description
Right Angle Pins
PCB Connection
Machine Solder
Part Number Type
90.970
KO4306
Accessories
1 Meter DIN Rail
Part Number
2511120/1M
ENCLOSURE DRAWING
Accessories
1 Meter DIN Rail
Type
TS35x7.5/1M
PCB Connection
Machine Solder
Part Number
2511120/1M
ENCLOSURE DRAWING
(To convert to inches divide by 25.4.)
DIN Rail
(To convert to inches divide by 25.4.)
A-A
99.5
92
90
16 21.1 21.1 21.1
121
113
90
16 21.1 21.1 21.1
A
A
2.4
1.5
35
PCB 4
A
Print area 82 x 43.6
PCB 3
PCB 2
PCB 1
PCB DRAWING
(To convert to inches divide by 25.4.)
A
Print area 82 x 43.6
(To convert to inches divide by 25.4.)
74.9
74.9
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
67.9
58.4
54.1
58.4
54.1
47.7
unused space,
no conducting material
47.7
38.2
38.2
5.2
33.9
9.8
1
9.6
1
1.5 thick
107
83.1
16x1
1
9.5
17.7
4.6
1.6
3x5=15
96
74.4
86
9.5
62.1
16x1
1.6
1.6
40.6
3x5=15
75
4.6
17.7
5
5
18.6
1.7
9.6
1
18.6
9.8
1.7
5.2
33.9
1.6
unused space,
no conducting material
67.9
61.6
reduced component
height 1.65mm solder side,
15.35mm component side
unused space
90
90
35
2.4
1.5
PCB 3
PCB 2
PCB 1
53.4
Type
TS35x7.5/1M
DIN Rail
A-A
PCB DRAWING
Description
Right Angle Pins
ACCESSORIES
ACCESSORIES
PCB 4
Recommended Torque:
Temperature Range:
Mounting:
Flammability Rating:
M3.5
Terminal Block Material:
Max. PCB’s:
Up to 115°C (239°F), Housing
290°C (554°F), Terminals
Terminal Screw Size:
Glass-filled Polycarbonate
Recommended Torque:
Temperature Range:
Screw / Rising Clamp
Housing Material:
M3.5
Terminal Block Material:
Terminal Type:
16A, 300V, 22-12 AWG
1.5 thick
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
71