revision for dwg # 1PB-P2AFx ch.no. - - date description original design revised by Philipp E. 1 2 n29 mm Up tp six switch contacts can be installed. 11/5/2007 [1.1 in] rev 6 5 4 3 ITEM DESCRIPTION max. 4 mm [.16 in] 1* Plastic Flush Operator (Momentary) 2* 3* 4* 5 Rubber Gasket Mounting Nut Mounting Bracket Panel 20 mm [.8 in] 44 mm [1.7 in] 68 mm [2.7 in] 92 mm [3.6 in] 5** Switch Contacts * = Push button is supplied with rubber gasket, mounting nut and mounting bracket (ITEM 1,2,3 and 4) ** = Switch Contacts must be ordered separatly unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel 11 mm [.4 in] CAT. NO. P2AF1 P2AF2 P2AF3 P2AF4 P2AF6 P2AF7 2PRG1 P2MN P2BRK S1 S2 S3 S4 COLOR MIN. QTY. MAX. QTY. White 1 1 Black 1 1 Green 1 1 Red 1 1 Blue 1 1 Yellow 1 1 Black 1 1 Black 1 1 Black 1 1 Green 1 6 Red 1 6 Green/Gray 1 6 Red/Gray 1 6 22 mm Thermoplastic Enclosure Flush Momentary Operator P2AFx (x=color) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/5/2007 drawing no.: rev.: 1PB-P2AFx scale: - sheet: 1 of: 1