8 7 5 6 4 3 2 1 REVISIONS REV. ECN/E-R A B MATERIAL: D DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 AMPHENOL PART NUMBER CONFIGURATION U77 - A X 4 1 M - X 0 8 1 PACKAGING 1 = TRAY PACKAGING CAGE: COPPER ALLOY PLATING OPTION 2: 2.54 um MIN. NICKEL D PLATING OPTIONS 2 = NICKEL PLATING 3 = MATTE TIN PLATING PLATING OPTION 3: 3.81 um MIN. MATTE TIN OVER 1.27um MIN. NICKEL NUMBER OF PORTS 2 = 2 PORTS 4 = 4 PORTS 6 = 6 PORTS PACKAGING: TRAY PACKAGING TEMPERATURE RANGE: -40C TO +85C C C P/N U77-A641M-X081 SHOWN DATE CODE PART NUMBER B B P/N U77-A441M-X081 SHOWN P/N U77-A241M-X081 SHOWN UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 4:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 1 OF 6 1 8 7 5 6 4 3 2 1 REVISIONS ECN/E-R REV. A B D PART NUMBER DIM"A" DIM"B" U77-A241M-X081 28.75 33.75 U77-A441M-X081 57.25 62.25 U77-A641M-X081 85.75 90.75 DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 D DIM"B" DIM "A" U77-A641M-X081 SHOWN C C U77-A241M-X081 SHOWN B B U77-A441M-X081 SHOWN UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 1:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 2 OF 6 1 8 7 4 5 6 3 2 1 REVISIONS REV. ECN/E-R A B D PART NUMBER U77-A241M-X081 DIM"C" 29.70 DIM "D" 34.25 U77-A441M-X081 58.20 62.75 U77-A641M-X081 86.70 91.25 DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 D 38.90±0.30 A (10.15) 10.40±0.10 CL OF CONNECTOR GUIDE PINS PER SPEC. PCB C C 0.25±0.10 (OPENING BELOW PCB) A 3.50 1.57 35.40 MAX DIM "C"±0.10 SECTION A-A SCALE 2 : 1 RECOMMENDED BEZEL DESIGN (ONE SIDE CAGE MOUNTING) B B DIM "D" MIN A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 1:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 3 OF 6 1 8 7 4 5 6 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. REV. ECN/E-R A B DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 PATTERN REPEATS FOR EACH PORT. SPACING BETWEEN PORTS IS 14.25mm. APPLIES TO ALL GANGED LAYOUTS 26.18 21.38 16.58 11.93 7.13 0 0.95±0.05 (12 PLCS) 0.1 M X Z S 2.33 D THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 2.00±0.10 C 37.10 35.00 32.50 C 12.05±0.10 30.90 27.50 25.00 22.80 20.00 B 15.00 1.55±0.05 0.05 L X Z S 1.05±0.05 0.1 S X Y DETAIL B SCALE 4 : 1 1.55±0.05 0.05 L -V- -W3.80 1.05±0.05 (12 PLCS) 0.1 M X Z S 10.00 0 11 20 B 2.00 (TYP.) (SEE NOTES 2) 2.00±0.05(20 PLCS) 0.06 L V W 4.10 PIN 1 4.50 (BSC) (SEE NOTE 1) 19.93 22.83 25.33 28.50 5.68 8.58 11.08 14.25 0 0.50±0.03(20 PLCS) 0.06 L V W CROSS-HATCH AREA DENOTES COMPONENTS AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 0.80 3.40 3.80 9.60 DETAIL C SCALE 4 : 1 RECOMMENDED PCB DESIGN (P/N: U77-A241M-X081) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 DO NOT SCALE DRAWING THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 7 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES X.X 0.38 X.XX 0.25 8 B 10 X Y X W S 2.00 (TYP.) (SEE NOTES 2) 4.10 0 C 3.40 5.00 -Z- D 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 2:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 4 OF 6 1 8 7 4 5 6 3 2 1 REVISIONS REV. ECN/E-R A NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. B DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 D 54.68 49.88 45.08 40.43 35.63 30.83 26.18 21.38 16.58 11.93 7.13 0 2.33 D 0.95±0.05(20 PLCS) 0.1 M X Z S THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 37.10 35.00 32.50 C C 30.90 27.50 25.00 22.80 20.00 1.05±0.05 0.1 S X Y 15.00 -Z10.00 1.05±0.05(25 PLCS) 0.1 M X Z S 5.00 B 0 B 0 (BSC) (SEE NOTE 1) 48.43 51.33 53.83 57.00 37.08 39.58 42.75 34.18 22.83 25.33 28.50 19.93 5.68 8.58 11.08 14.25 X 0 Y RECOMMENDED PCB DESIGN (P/N: U77-A441M-X081) A CROSS-HATCH AREA DENOTES COMPONENTS AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 2:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 5 OF 6 1 8 7 4 5 6 3 2 1 REVISIONS ECN/E-R REV. NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. A B DESCRIPTION DATE PROPOSAL UPDATED MAR26/09 APPROVED JUL14/09 D 83.18 78.38 73.58 68.93 64.13 59.33 54.68 49.88 45.08 40.43 35.63 30.83 26.18 21.38 16.58 11.93 7.13 0 2.33 D 0.95±0.05(28 PLCS) 0.1 M X Z S THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 37.10 35.00 32.50 C 30.90 27.50 C 25.00 22.80 1.05±0.05 0.1 S X Y 20.00 15.00 -Z- 1.05±0.05(38 PLCS) 0.1 M X Z S 10.00 5.00 0 0 B B (BSC) (SEE NOTE 1) X RECOMMENDED PCB DESIGN (P/N: U77-A641M-X081) 76.93 79.83 82.33 85.50 62.68 65.58 68.08 71.25 48.43 51.33 53.83 57.00 34.18 37.08 39.58 42.75 19.93 22.83 25.33 28.50 5.68 8.58 11.08 14.25 0 Y UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING CROSS-HATCH AREA DENOTES COMPONENTS AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 03554 DATE ChigowX MAR14/09 DESIGNED CHECKED J.SI A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ASSEMBLY WITH ELASTOMERIC GASKET MAR26/09 QA APPD SIZE IE APP'D A3 DWG APP'D SCALE A.G MAR26/09 2 DWG. NO. 1:1 REV. P-U77-AX41M-X081 SHEET PROJECT B 6 OF 6 1