Adapter for Motorola MC145158-2 SOIC DW-to-20-Pin PLCC FEATURES •A cost-effective means of upgrading to SOJ or SOIC without changing your PCB layout. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •OPERATING TEMPERATURE: 221ºF [105ºC] MOUNTING CONSIDERATIONS •Standard surface mount CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS: INCHES [MILLIMETERS] ORDERING INFORMATION 20-301550-X 0 Plating Sn Pin Length 1 = Pin 1112610-T 2 = Pin 1112578-T ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS SOIC PLCC PAD 1 2 2 3 3 4 4 5 5 7 6 8 7 9 8 10 9 12 10 13 11 14 12 15 13 17 14 18 15 19 16 20 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18079 Rev. AA