BCM5464 PRODUCT Brief ® QUAD-PORT 10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER S U M M A R Y F E AT U R E S Four fully integrated 10BASE-T/100BASE-TX/ • 1000BASE-T Gigabit Ethernet transceivers • GMII, RGMII, SGMII, and SerDes MAC interface options • 1-Gbps line-side SerDes with GMII/RGMII MAC interface Fully compliant with IEEE 802.3, 802.3u, and 802.3ab • standards • 0.13-micron CMOS—low-power and cost • Supports copper or fiber in GMII and RGMII modes • Low-power • 750 mW per port • Advanced power management • Trace matched output impedance • Line-side loopback • Low EMI emissions • Cable plant diagnostic • Cable plant analyzer function detects cable plant impairments • Link quality indication LED • Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity • Automatic MDI/MDIX crossover at all speeds cable-sourced electrostatic discharge (CESD) • Robust tolerance • Support for jumbo packets up to 10 KB • IEEE 1149.1 (JTAG) boundary scan • Package: 354-pin BGA O F B E N E F I T S Low-power, quad-port integration enables single-row, • high port density switches • Lowers system costs by eliminating PCB layers required for routing high density solutions • Reduced I/O pin requirements with RGMII (over 50%), SGMII (over 75%), and SerDes (over 80%) • Clock timing can be adjusted to eliminate board trace delays required by the RGMII specification • Lowers MAC/switch costs by reducing the number of pins required to interface to the PHY Provides compatibility with IEEE standard devices • operating at 10, 100, and 1000 Mbps at at half-duplex • • • • • and full-duplex Requires no airflow or heatsink Lowers system BOM cost and simplifies system design Eases system level debug Enables use of low cost magnetics, even in high density (48+) designs Cable diagnostic function characterizes cable plant condition and immediately indicates cabling issues • Prevents erroneous equipment return due to bad cable plants • Prevents manufacturing fall-out due to bad cable plants Over 4 kV of CESD tolerance prevents equipment • damage and return Operates with larger packets for wider range of packet • protocol support and improved efficiency Ease of manufacturing with JTAG support, simplified • power supply, and multiple MAC interfaces BCM5464 BCM5464 BCM5464 BCM5464 10/100/1000BASE-T Gigabit Ethernet Transceiver BROADCOM PROPRIETARY & CONFIDENTIAL 2x8 RJ-45s 10/100/1000Mbps Ethernet Switch BCM5464 System Diagram with integrated magnetics B C M 5 4 6 4