BOSER HS

HS-2606
Eden Embedded Engine Board
•CompactFlash•PCMCIA•Mini PCI•
•CRT/Panel•TV-Out•LAN•Audio•
•ATA/33/66/100•4 COM•USB2.0•WDT•
Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
TTrraaddeem
maarrkkss
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.6, February 26, 2008
Table of Contents
Chapter 1
General Description ..................................1
1.1 Major Features ....................................................................... 2
1.2 Specifications ........................................................................ 3
1.3 Board Dimensions................................................................. 4
Chapter 2
Unpacking ..................................................5
2.1 Opening the Delivery Package............................................. 5
2.2 Inspection............................................................................... 5
Chapter 3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
3.22
Hardware Installation ..............................7
Before Installation ................................................................. 7
Board Layout ......................................................................... 8
Jumper List ............................................................................ 9
Connector List ....................................................................... 9
Configuring the CPU ............................................................. 9
System Memory ................................................................... 10
CMOS Data Clear................................................................. 10
Power and Fan Connectors................................................ 10
System Front Panel Control ............................................... 11
VGA Controller .................................................................... 11
TV-Out Connector ............................................................... 13
Ethernet Connector............................................................. 13
Audio Connectors ............................................................... 14
PCI E-IDE Drive Connector................................................. 15
Serial Port Connectors ....................................................... 16
USB Connector.................................................................... 16
Keyboard/Mouse Connectors ............................................ 17
Watchdog Timer .................................................................. 17
GPIO Function ..................................................................... 18
Mini PCI Slot......................................................................... 19
CompactFlash Connector................................................ 19
PCMCIA Connector ............................................................. 19
Chapter 4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
Chapter 5
5.1
5.2
5.3
5.4
Award BIOS Setup ................................. 21
Starting Setup...................................................................... 21
Using Setup ......................................................................... 22
Main Menu............................................................................ 23
Standard CMOS Features................................................... 24
Advanced BIOS Features ................................................... 25
Advanced Chipset Features............................................... 26
Integrated Peripherals ........................................................ 28
Power Management Setup ................................................. 30
PnP/PCI Configurations...................................................... 31
Frequency/Voltage Control ................................................ 32
Software Utilities..................................... 33
VGA Driver Installation ....................................................... 33
LAN Driver Installation........................................................ 43
Audio Driver Installation..................................................... 53
USB2.0 Driver Installation .................................................. 59
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity. To
avoid damaging chips from electrostatic discharge, observe the following
precautions:
Do not remove boards or integrated circuits from their anti-static packaging
until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This helps to discharge any static
electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR clip
of the strap to the end of the shielded wire lead from a grounded object.
Please wear and connect the strap before handle the product to ensure
harmlessly discharge any static electricity through the strap.
Please use an anti-static pad when putting down any components or parts or
tools outside the computer. You may also use an anti-static bag instead of
the pad. Please inquire from your local supplier for additional assistance in
finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.
Chapter 1
General Description
The HS-2606 is a 100/133MHz FSB VIA CLE266/VT8235
chipset-based board designed for Mini PCI Local Bus VIA Eden 1GHz
Embedded CPU. These features combine and make the HS-2606 and
ideal all-in-one industrial single board computer. Additional features
include and enhanced I/O with CF, PCMCIA, CRT/Panel, audio, LAN
TV-Out, 4 COM, and USB2.0 interfaces.
Its onboard ATA/33/66/100 to IDE drive interface architecture allows
the HS-2606 to supports data transfers of 33, 66 or 100MB/sec. To one
IDE drive connection. Designed with the VIA CLE266/VT8235 core
logic chipset, the board supports VIA Eden 1GHz Embedded CPU. The
VIA CLE266 integrated S3 3D supports CRT display up to 1400 x 1050
@ 60Hz, and panel display up to 1400 x 1050.
HS-2606 offers PCMCIA connector and CompactFlash reader in
addition. +7~+26V wide range single DC power in can make HS-2606
suitable for all kinds of environments even more.
1
System memory is also sufficient with the one 200-pin SO-DDR socket
that can supports up to 1GB.
Additional onboard connectors include 4 USB2.0 port providing faster
data transmission. And one external RJ-45 connector for 10/100 Based
Ethernet use.
1.1
Major Features
The HS-2606 comes with the following features:
VIA Eden ESP10000 1GHz embedded CPU
One SO-DDR socket with a max. capacity of 1GB
VIA CLE266/VT8235 chipset
Winbond W83697UF super I/O chipset
VIA CLE266 graphics controller
RealTek RTL8139DL Ethernet controller
AC97 3D audio controller
Fast PCI ATA/33/66/100 IDE controller
CF, PCMCIA, 4 COM, 4 USB2.0
TV-Out function
+7~+26V wide range single DC power in
2
1.2
Specifications
CPU: VIA Eden processor 1GHz
Memory: One SO-DDR socket supports up to 1GB
Chipset: VIA CLE266/VT8235
I/O Chipset: Winbond W83697UF
CompactFlash: One, Type I/II IDE interface adapter
PCMCIA: Two PC Card or CardBus slots
PCI Slot: One, Type I mini PCI slot
VGA: VIA CLE266 integrated S3 3D supports AGP Bus and Hardware
MPEG-2
TV-Out: Supports PAL or NTSC TV system
Ethernet: RealTek RTL8139DL 10/100 Based LAN
Audio: AC97 3D audio controller
IDE: One 2.0-pitch 44-pin IDE connector
Serial Port: 16C550 UART-compatible RS-232 x 4 serial ports with
16-byte FIFO
USB: 4 internal USB2.0 ports
Keyboard/Mouse: PS/2 6-pin Mini DIN
BIOS: Award PnP Flash BIOS
Watchdog Timer: Software programmable time-out intervals from
1~255 sec.
CMOS: Battery backup
Power In: +7~+26V wide range single DC power in
Temperature: 0~+60°C (operating)
Dimensions: 14.5(L) x 10.2(W) cm
3
1.3
4
Board Dimensions
Chapter 2
Unpacking
2.1
Opening the Delivery Package
The HS-2606 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Saftey instructions in front of this manual describe anti-static
precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-2606 delivery package
contains the following items:
HS-2606 Board x 1
Utility CD Disk x 1
Cables Package x 1
Jumper Bag x 1
User’s Manual
5
NO.
1
2
3
4
5
6
Cables Package
Description
4-pin power cable x 1
MIC/Audio cable x 1
8-pin USB split type cable x 1
PS/2 KB/MS transfer cable x 1
RS-232 cable x 4
IDE flat cable x 1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.
6
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-2606. This chapter also contains information related to
jumper settings of switch, and watchdog timer selection etc.
3.1
Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1.
Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper.
2.
Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3.
Keep the manual and diskette in good condition for future
reference and use.
7
3.2
8
Board Layout
3.3
Jumper List
Jumper
JBAT1
JP3
3.4
Default Setting
Clear CMOS: Normal Operation
Panel Voltage Select: +3.3V
Setting
Page
Short 1-2
Short 1-2
10
11
Connector List
Connector
Definition
Page
CN1
CN2
CN3
CN4
CN5/CN7/CN8/CN9
CN6
CN10
CN11
CN12
CN13
DIM1
FN1
J1
J3
J4/J5
JP1
JP2
LCD1
P1
PC1
4-pin Power In Connector
2-pin ATX Power In Connector
PS/2 6-pin Mini DIN KB/MS Connector
RJ-45 Connector
COM 1~COM 4 Connector (5x2 header)
15-pin CRT Connector
RCA Connector
IDE Connector
CompactFlash Connector
6-pin KB/MS Header
SO-DDR Socket
Fan Power In Connector
Line In Connector
GPIO Connector
USB Connector
System Front Panel Control
MIC In/Audio Out Connector
44-pin Panel Connector
PCMCIA Connector
Mini PCI Connector
10
10
17
13
16
11
13
15
19
17
10
10
14
18
16
11
14
11
19
19
3.5
Configuring the CPU
The HS-2606 embedded with a VIA Eden ESP10000 1GHz embedded
CPU, user don’t need to adjust the frequently and check speed of the
CPU.
The new VIA Eden ESP10000 processors based on the Nehemiah
core build on the VIA Eden platform lineup, enabling improved digital
media performance with ultra low power consumption.
9
3.6
System Memory
The HS-2606 provides one 200-pin SO-DDR socket at locations DIM1.
The maximum capacity of the onboard memory is 1GB.
3.7
CMOS Data Clear
The HS-2606 has a Clear CMOS jumper on JBAT1.
JBAT1: Clear CMOS
Options
Settings
1
Normal Operation (default)
Clear CMOS
Short 1-2
Short 2-3
3
IMPORTANT: Before you turn on the power of your system, please
set JBAT1 to Short 1-2 for normal operation.
3.8
Power and Fan Connectors
HS-2606 provides one 4-pin power connector at CN1. And one 2-pin
ATX power in at CN2. Connector FN1 onboard HS-2606 is a 3-pin fan
power output connector. And HS-2606 supports +5V fan only.
CN2: 2-pin ATX Power In Control
PIN Description
1
2
PS_ON
5VSB
1 2
CN1: 4-pin DC Power In Connector
PIN Description
1
2
3
4
+7~+26V
GND
GND
+7~+26V
1
4
FN1: Fan Power In Connector
10
PIN
Description
1
2
3
GND
+5V
N/C
1
3
3.9
System Front Panel Control
JP1: System Front Panel Control
PIN Description
1
3
5
7
9
11
13
15
VCC
GND
N/C
Speaker
GND
Reset Switch
330Ω Pull +5V
HDD LED
PIN
Description
2
4
6
8
10
12
14
16
330Ω Pull +5V
GND
LAN Link LED
GND
PW Button
GND
LAN TX/RX LED
GND
Connector JP1 Orientation
Speaker
Reset
Button
HDD LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PWR LED
LAN Link
LED
PWR
Button
LAN TX/
RX LED
3.10 VGA Controller
The HS-2606 provides two connection methods of a VGA device. CN6
offers a single standard CRT connector while LCD1 is the 44-pin panel
connector. VIA CLE266 VGA chipset shared main memory 8/16/32MB,
and provides high quality DVD video playback. HS-2606 also provides
Hardware MPEG-2.
CRT resolution is up to 1400 x 1050 @60Hz, Panel resolution is up to
1400 x 1050. And LCD at 32bpp is not supported with SXGA + Panel.
11
CN6: 15-pin CRT Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
Red
Blue
GND
GND
N/C
N/C
HSYNC
SCL
Green
N/C
GND
GND
GND
SDA
VSYNC
2
4
6
8
10
12
14
1
6 11
5 10 15
LCD1: 44-pin Panel Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
N/C
GND
VLCD
ENPVEE
GFPD0
GFPD2
GFPD4
GFPD6
GFPD8
GFPD10
GFPD12
GFPD14
GFPD16
GFPD18
GFPD20
GFPD22
N/C
SHFLCK
GFPDEN
GND
N/C
N/C
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
N/C
GND
ENAVDD
GND
GFPD1
GFPD3
GFPD5
GFPD7
GFPD9
GFPD11
GFPD13
GFPD15
GFPD17
GFPD19
GFPD21
GFPD23
N/C
GFPVS
GHPHS
FPBKLP
N/C
N/C
1
43
2
44
NOTE: Please set the proper voltage of your panel use JP3 before proceeding
on installing it.
12
The HS-2606 has an onboard jumper that selects the working voltage
of the flat panel connected to the system. Jumper JP3 offers two
voltages setting for the user.
JP3: Panel Voltage Select
Options
Settings
1
+3.3V (default)
+5V
Short 1-2
Short 2-3
3
3.11 TV-Out Connector
The HS-2606 can supports TV-Out function which input could be up to
800 x 600 graphics resolutions. World Wide Video standards are
supported including NTSC-M (North America, Taiwan), NTSC-J
(Japan), PAL-B, D, G, H, I (Europe Asia), PAL-M (Brazil), PAL-N
(Uruguay, Paraguay) and PAL-NC (Argentina).
CN10: RCA Connector (for TV-Out function)
PIN Description
1
2
3
4
SPDIFO
GND
GND
GND
3.12 Ethernet Connector
The HS-2606 provides two external RJ-45 interface connectors.
Please refer to the following for its pin information.
CN4: RJ-45 Connector
PIN Description
1
2
3
4
5
6
7
8
TX+
TXRX+
R/C GND
R/C GND
RXR/C GND
R/C GND
8
1
13
3.13 Audio Connectors
The HS-2606 has an onboard AC97 3D audio controller. The following
tables list the pin assignments of the Line In/Audio Out connector.
JP2: MIC In/Audio Out Connector
PIN Description PIN Description
1
3
5
7
AOUTL
GND
MIC IN
GND
2
4
6
8
AOUTR
GND
N/C
GND
1
2
7
8
J1: Line In Connector
PIN Description PIN Description
1
3
14
LINE R
GND
2
4
GND
LINE L
1
4
3.14 PCI E-IDE Drive Connector
CN11 is a standard 44-pin 2.0-pitch connector daisy-chain driver
connector serves the PCI E-IDE drive provisions onboard the HS-2606.
A maximum of two ATA/33/66/100 IDE drives can be connected to the
HS-2606 via CN11.
CN11: IDE Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
Reset
DATA 7
DATA 6
DATA 5
DATA 4
DATA 3
DATA 2
DATA 1
DATA 0
GND
PDREQ
IOW#
IOR#
PIORDY
RPDACKInterrupt
RPDA1RPDA0RPCS1HDD Active
VCC
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
GND
DATA 8
DATA 9
DATA 10
DATA 11
DATA 12
DATA 13
DATA 14
DATA 15
N/C
GND
GND
GND
GND
GND
N/C
PATA66
RPDA2RPCS3GND
VCC
N/C
43
44
1
2
15
3.15 Serial Port Connectors
The HS-2606 offers NS16C550 compatible UARTs with Read/
Receive 16-byte FIFO serial ports and internal 10-pin headers.
CN5/CN7~CN9: COM 1~COM 4 Connector (5x2 Header)
PIN Description PIN Description
DCD
RXD
TXD
DTR
GND
1
3
5
7
9
DSR
RTX
CTX
RI
N/C
2
4
6
8
10
9
1
10
2
3.16 USB Connector
The HS-2606 provides two 8-pin connectors, at location J4 and J5, for
four USB2.0 ports to the HS-2606.
J4/J5: USB2.0 Connector
16
PIN
Description
PIN
Description
1
3
5
7
VCC
BD2-/ BD0BD2+/ BD0+
GND
2
4
6
8
VCC
BD3-/BD1BD3+/BD1+
GND
3.17 Keyboard/Mouse Connectors
The HS-2606 offers two possibilities for keyboard/mouse connections.
The connections are via CN3 for an external PS/2 type
keyboard/mouse OR CN13 for 6-pin header.
CN3: PS/2 6-pin Mini DIN KB/MS Connector
PIN
Description
1
2
3
4
5
6
Keyboard Data
Mouse Data
GND
+5V
Keyboard Clock
Mouse Clock
6
4
5
3
2
1
CN13: 6-pin Keyboard/Mouse Connector
PIN
Description
1
2
3
4
5
6
Keyboard Clock
Keyboard Data
Mouse Clock
Mouse Data
+5V
GND
6
1
3.18 Watchdog Timer
Once the Enable cycle is active a Refresh cycle is requested before the
time-out period. This restarts counting of the WDT period. When the
time counting goes over the period preset of WDT, it will assume that
the program operation is abnormal. A System Reset signal will restart
when such error happens.
The following sample programs show how to enable, disable and
refresh the watchdog timer:
17
;---------------------------------------------------------------;Enter the WDT function mode, interruptible double-write
;---------------------------------------------------------------MOV
DX, 4EH
MOV
AL, 87H
OUT
DX, AL
OUT
DX, AL
;---------------------------------------------------------------;Configuration logical device 8, configuration register CRF30
;---------------------------------------------------------------MOV
DX, 4EH
MOV
AL, 07H
OUT
DX, AL
;point to Logical Device Number Reg.
MOV
DX, 4FH
MOV
AL, 08H
OUT
DX, AL
;select logical device 8
MOV
DX, 4EH
MOV
AL, 30H
OUT
DX, AL
;select CRF30
MOV
DX, 4FH
MOV
AL, 01H
OUT
DX, AL
;update CRF30 with value 01H
MOVDX, 4EH
MOV
AL, F3H
OUT
DX, AL
;select CRF3 (select WDTO count mode)
MOV
DX, 4FH
MOV
AL, 00H
OUT
DX, AL
;update CRF3 with value 00H (bit 2:0=second; 1=minute)
MOV
DX, 4EH
MOV
AL, F4H
OUT
DX, AL
;select CRF4 (WDTO Time-out value)
MOV
DX, 4FH
MOV
AL, 05H
OUT
DX, AL
;update CRF4 with value 05H
Bit[7:0] = 00 Time-out Disabled
01 Time-out occurs after 1 second/minute
02 Time-out occurs after 2 second/minute
.
.
ff Time-out occurs after 255 second/minute
3.19 GPIO Function
The HS-2606 offers four general purpose I/O ports with the following
capabilities:
I2C/SMB Support
Thermal Detect
Notebook Lid Open/close Detect
Battery Low Detect
J3: GPIO Connector
PIN Description PIN Description
1
3
18
GPIO8
GPIO10
2
4
GPIO9
GPIO11
1
4
3.20 Mini PCI Slot
HS-2606 supports a mini PCI connector at location PC1. The
peripheral component with standard TypeI mini PCI can be used. For
particular requirement, please refer to “BOSER Mini PCI Series”
product on website or contact with us.
3.21 CompactFlash Connector
The HS-2606 also offers a Type I/II CompactFlash connector which
is IDE interface located at the solder side of the board (beneath the
SO-DIMM connector). The designated CN12 connector, once soldered
with an adapter, can hold CompactFlash cards of various sizes.
Please turn off the power before inserting the CF card.
Fa Ma
br de
iq in
ue J
A ap
u an
Ja /
po
n
CE
C
F
C
om
pa
ct
Fl
as
hT
R
M
ea
rS
id
e
PC
Si B
de S o
Vi lde
ew r
Inserting a CompactFlash card into the adapter is not a difficult task.
The socket and card are both keyed and there is only one direction for
the card to be completely inserted. Refer to the diagram on the
following page for the traditional way of inserting the card.
3.22 PCMCIA Connector
HS-2606 built-in two CardBus/PCMCIA interface connector at location
P1.
19
This page is the blank page.
20
Chapter 4
Award BIOS Setup
The HS-2606 uses Award BIOS for the system configuration. The
Award BIOS setup program is designed to provide the maximum
flexibility in configuring the system by offering various options that
could be selected for end-user requirements. This chapter is written to
assist you in the proper usage of these features.
4.1
Starting Setup
The Award BIOS is immediately activated when you first power on the
computer. The BIOS reads the system information contained in the
CMOS and begins the process of checking out the system and
configuring it. When it finishes, the BIOS will seek an operating system
on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <Del> key when the following message appears
briefly at the bottom of the screen during the POST (Power On Self
Test).
Press DEL to enter SETUP.
If the message disappears before you respond and you still wish to
enter Setup, restart the system to try again by turning it OFF then ON or
pressing the "RESET" button on the system case. You may also restart
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do
not press the keys at the correct time and the system does not boot, an
error message will be displayed and you will be asked to...
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
21
4.2
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to
select, use the <PageUp> and <PageDown> keys to change entries,
and press <Esc> to quit. The following table provides more detail about
how to navigate in the Setup program using the keyboard.
↑
↓
←
→
Esc key
PgUp key
PgDn key
+ key
- key
F1 key
F2 key
F3 key
F4 key
F5 key
F6 key
F7 key
F8 key
F9 key
F10 key
22
Move to previous item
Move to next item
Move to previous item
Move to previous item
Main Menu -- Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu
Decrease the numeric value or make changes
Increase the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Reserved
Change color from total 8 colors. F2 to select color forward
F2 to select color backward
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
4.3
Main Menu
Once you enter the Award BIOS CMOS Setup Utility, the Main Menu
will appear on the screen. The Main Menu allows you to select from
several setup functions and two exit choices. Use the arrow keys to
select among the items and press <Enter> to enter the sub-menu.
Phoenix – AwardBIOS CMOS Setup Utility
X
X
X
X
X
X
X
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc: Quit
F9: Menu in BIOS
F10: Save & Exit Setup
NOTE:
↑↓← →: Select Item
A brief description of the highlighted choice appears at the bottom
of the screen.
23
4.4
Standard CMOS Features
The standard CMOS is used for the basic hardware system
configuration. The main function is for Data/Time and Floppy/Hard Disk
Drive settings. Please refer to the following screen for the setup. When
the IDE hard disk drive you are using is larger than 528MB, you must
set the HDD mode to LBA mode. Please use the IDE setup utility in
BIOS setup to install the HDD correctly.
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
X
X
X
X
IDE
IDE
IDE
IDE
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Video
Halt On
Base Memory
Extended Memory
Total Memory
↑↓← →: Select Item
F5: Previous Values
24
Mon, Aug 9 2004
10 : 32 : 57
Item Help
[Auto]
[Auto]
[Auto]
[Auto]
[EGA/VGA]
[All, But Keyboard]
640K
56320K
57344K
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Esc: Quit
F1: General Help
F7: Optimized Defaults
4.5
Advanced BIOS Features
This section allows you to configure your system for the basic
operation. You have the opportunity to select the system’s default
speed, boot-up sequence, keyboard operation, shadowing and
security.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced CMOS Features
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
MPS Version Control For OS
OS Select For DRAM > 64MB
Report No FDD For WIN 95
Video BIOS Shadow
Small Logo(EPA) Show
↑↓← →: Select Item
F5: Previous Values
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[HDD-0]
[CDROM]
[HDD-1]
[Enabled]
[On]
[Fast]
[Disabled]
6
250
[Setup]
[1.4]
[Non-OS2]
[Yes]
[Enabled]
[Enabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
25
4.6
Advanced Chipset Features
This section allows you to configure the system based on the specific
features of the installed chipset. This chipset manages bus speeds and
the access to the system memory resources, such as DRAM and the
external cache. It also coordinates the communications between the
conventional ISA and PCI buses. It must be stated that these items
should never be altered. The default settings have been chosen
because they provide the best operating conditions for your system.
You must consider making any changes only if you discover that the
data has been lost while using your system.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Click/Drive Control
AGP & P2P Bridge Control
CPU & PCI Bus Control
Memory Hole
System BIOS Cacheable
Video RAM Cacheable
VGA Share Memory Size
Select Display Device
TV_type
TV_Connector
TV_Layout
Panel Type
↑↓← →: Select Item
[Press Enter]
[Press Enter]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[32M]
[CRT]
[NTSC]
[CVBS]
[Default]
[07]
+/-/PU/PD: Value
F5: Previous Values
F10: Save
Item Help
Esc: Quit
F6: Fail-Safe Defaults
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
DRAM Clock/Drive Control
Current FSB Frequency
Current DRAM Frequency
DRAM Clock
DRAM Timing
DRAM CAS Latency
Bank Inter leave
Precharge to Active (Trp)
Active to Precharge (Tras)
Active to CMD (Tred)
DRAM Command Rate
↑↓← →: Select Item
F5: Previous Values
26
Item Help
[By PSD]
[By PSD]
2.5
Disabled
3T
6T
3T
[2T Command]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
AGP
AGP
AGP
AGP
AGP
AGP
AGP
Aperture Size
Mode
Driving Control
Driving Value
Fast Write
Master 1 WS Write
Master 1 WS Read
↑↓← →: Select Item
[64M]
[4X]
[Auto]
DA
[Disabled]
[Disabled]
[Disabled]
+/-/PU/PD: Value
F5: Previous Values
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
CPU & PCI Bus Control
CPU to PCI Write Buffer
PCI Master 0 WS Write
PCI Delay Transaction
↑↓← →: Select Item
F5: Previous Values
[Enabled]
[Enabled
[Disabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
27
4.7
Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
VIA OnChip IDE Device
VIA OnChip PCI Device
Super IO Device
Init Display First
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
↑↓← →: Select Item
[Press Enter]
[Press Enter]
[Press Enter]
[PCI Slot]
[3E8]
[IRQ10]
[2E8]
[IRQ11]
+/-/PU/PD: Value
F5: Previous Values
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
VIA OnChip IDE Device
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE HDD Block Mode
↑↓← →: Select Item
F5: Previous Values
28
[Enabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
VIA-3058 AC97 Audio
OnChip USB Controller
OnChip EHCI Controller
USB Device Function
USB Keyboard Support
USB Mouse Support
↑↓← →: Select Item
[Auto]
[All Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
+/-/PU/PD: Value
F5: Previous Values
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
RxD , TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
Midi Port Address
Midi Port IRQ
↑↓← →: Select Item
F5: Previous Values
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
[Hi,Lo]
[Enabled]
[Half]
[IR-Rx2Tx2]
[Disabled]
10
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
29
4.8
Power Management Setup
The power management setup allows user to configure the system for
saving energy in a most effective way while operating in a manner
consistent with his owns style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-off by PWRTYN
Run VGABIOS if S3 Resume
IRQ/Event Activity Detect
↑↓← →: Select Item
[Enabled]
[S1(POS)]
[User Define]
[Disabled]
[Disabled]
[Suspend
Off]
[V/H SYNC+Blank]
[3]
[Instant-off]
[Auto]
[Press Enter]
+/-/PU/PD: Value
F5: Previous Values
F10: Save
Item Help
Esc: Quit
F6: Fail-Safe Defaults
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
IRQ/Event Activity Detect
PS2KB Wakeup Select
PS2KB Wakeup from S3/S4/S5
Power Button Lock
PS2MS Wakeup from S3/S4/S5
USB Resume from S3
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn By PCI Card
Modem Ring Resume
RTC Alarm Resume
Date (of Month)
Resume Time (hh:mm:ss)
IRQs Activity Monitoring
↑↓← →: Select Item
F5: Previous Values
30
[Hot Key]
[Disabled]
Enabled
[Disabled]
[Disabled]
[OFF]
[LPT/COM]
[ON]
[OFF]
[Disabled]
[Disabled]
[Disabled]
0
0:0:0
[Press Enter]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
↑↓← →: Select Item
[ON]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
+/-/PU/PD: Value
F5: Previous Values
4.9
F10: Save
Item Help
Esc: Quit
F6: Fail-Safe Defaults
F1: General Help
F7: Optimized Defaults
PnP/PCI Configurations
This section describes the configuration of the PCI bus system.
Peripheral Components Interconnect (PCI), is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data
[No]
[Disabled]
Resources Controlled By
IRQ Resources
[Auto(ESCD)]
Press Enter
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
[Disabled]
[Enabled]
[Enabled]
↑↓← →: Select Item
F5: Previous Values
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
31
4.10 Frequency/Voltage Control
Phoenix – AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
VIA C3 Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Specturm
CPU Host/PCI Clock
↑↓← →: Select Item
F5: Previous Values
32
[Default]
[Enabled]
[Disabled]
[Default]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Esc: Quit
F1: General Help
F7: Optimized Defaults
Chapter 5
Software Utilities
The chapter contains the detailed information of VGA, LAN, audio,
and USB2.0 driver installation procedures.
The drivers are located in the following directories of the utility disk:
VGA Driver: \VGA\WIN98_ME or \VGA\XP_2K
LAN Driver: \LAN
Audio Driver: \AC97
USB2.0 Driver: \USB20\2K or \USB\XP
5.1
VGA Driver Installation
5.1.1 WIN95/98
1.
With the Utility CD Disk still in your CD-ROM drive, open the File
Manager and then select the VGA driver folder.
33
2.
Select the operation system of your computer to proceed with
the installation process.
3.
Click on the “Setup.exe” and to go setup.
34
4.
Once the Welcome screen appears on the screen, make sure to
close applications that are running and then click the Next>
button.
5.
When the display below appears on your screen, Setup is
already ready to install and copy the related files onto your
hard drive. Click on the Next button to proceed.
35
6.
After the installation finishes, you will be prompted to restart your
system. We recommend you to reboot your computer to allow the
new settings to take effect. Click on the Finish button to reboot.
5.1.2 VGA Driver Installation for WIN2K/XP
NOTE: Please make sure you have already installed Service Pack 6.0.
1.
36
With the Utility CD Disk still in your CD ROM drive, open the File
Manager and then select the VGA driver folder.
2.
Select the operating system of your computer to proceed with the
installation process.
3.
Click on the “Setup.exe” and to go setup.
37
4.
Once the Welcome screen appears on the screen, make sure to
close applications that are running and then click the Next button.
5.
When the display below appears on your screen, Setup is already
ready to install and copy the related files onto your hard drive.
Click on the Next button to proceed.
38
6.
After the installation finishes, you will be prompted to restart your
system. We recommend you to reboot your computer to allow the
new settings to take effect. Click on the Finish button to reboot.
5.1.3 VGA Driver Installation for WIN NT4.0
1.
Click the Start button on the lower left hand corner of your screen,
then select Setting. Choose Control Panel and double-click on
the Display icon to launch its Display Properties window.
39
2.
Click on the Settings tab, and then choose Display Type.
3.
In the Change Display Type window, click on Have Disk.
40
4.
Specify the path of the new driver and then press on Enter. (If in
driver E:, type E:\Vga\WinNT)
5.
Select VIA/S3G UniChrome Graphics, then click OK or press Enter.
41
6.
You will see warning panel about Third Party Drivers. Click on
Yes to finish the installation.
7.
Once the installation is completed, you must shut down the system
and restart for the new driver to take effect.
42
8.
5.2
Press on the OK button as soon as you have located the path of
your driver.
LAN Driver Installation
5.2.1 LAN Driver Installation for WIN95/98/2K
1.
With the Utility CD Disk still in your CD ROM drive, right click on My
Computer icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the main
menu.
43
2.
Select on PCI Ethernet Controller from Other devices list,
right-click and then select on Properties.
3.
The PCI Ethernet Controller Properties screen then appears,
allowing you to reinstall the driver. Select Driver from the main
menu to proceed.
44
4.
The window then displays the current status of your LAN driver.
Press on Update Driver button to continue.
5.
The program will then launch the Update Device Driver Wizard
window that will install your device driver. Click on the Next button
to proceed to the next step.
6.
The Update Device Driver Wizard will then ask you to specify, by
ticking, the path of the new driver. Tick on the open boxes where
you require the program to search for the device driver then click
on the Browse button to manually specify the path. (If in E:, type
E:\HS-2606 Driver\LAN\/w/in98)
7.
Update Device Driver Wizard will ask are you sure to updated
driver, tick on update, and then press Next to continue.
45
8.
Once the program detects the device driver (*.inf) file from your
specified location, it will automatically copy the files into your hard
drive.
9.
The program then copies the necessary files from your Windows
installation disk to complete the driver setup process. Once the
driver is completely installed, the following message appears on
your display. Click on the Finish button to proceed.
46
10.
Restart your computer to make the new system settings take
effect. Click on the Yes button when the screen below appears and
your LAN Driver for Win95 and Win98 are now completely installed.
5.2.2 LAN Driver Installation for WIN NT4.0
1.
With the Utility CD Disk still in your CD ROM drive, right click on
Network Neighborhood icon from the Windows menu. Select on
Properties.
2.
The system automatically detects the absence of Windows NT
Networking. Click on the Yes button to start installation.
47
3.
4.
48
Tick on the “Wired to Network” once the following screen appears.
Click on the Next to proceed.
Click on the Start Search button for the program to locate the
Network Adapter.
5.
Once setup finishes the search, it will list a number of adapters for
you to choose from. Press on the Have Disk button to assign the
driver path location.
6.
Setup now asks you for the location of the driver. When you have
entered the new driver path, press on the OK button to continue.
7.
When Setup finds the information it needs about the new driver, it
will display the device it found on the following screen. Press on
the OK button to accept and proceed.
49
8.
Setup then returns to Network Setup Wizard screen and displays
your new Network Adapter. Click on Next to continue.
9.
The Network Setup Wizard then allows you to set the Network
Protocols on your network. Select the appropriate protocol and
then click on Next to continue.
50
10.
The Network Setup Wizard then allows you to set the Network
Services on your Network, then click on Next to continue.
11.
Before Setup starts installing the components found and the
settings you made, it will give you the option to proceed or go back
for changes from the following screen. Click on the Next button
once you are sure of your devices.
51
12.
Windows NT Setup will then need to copy files necessary to update
the system information. Specify the path then press Continue.
13.
Once it finishes copying the files, Setup will now allow you to
choose the Duplex Mode of your LAN controller. Press on the
Continue button after making your selection.
14.
When Setup asks if you wish to change the TCP/IP settings of your
system, select the appropriately. The default choice is No.
15.
When the screen below appears, click on Next to continue.
52
16.
Setup then prompts you that it is ready to start the network. You
may complete the installation thereafter. Click on Next to
continue.
17.
Restart your computer. The LAN driver installation for WIN NT4.0
is now complete.
5.3
Audio Driver Installation
5.3.1 Audio Driver Installation for WIN98/2K/XP
1.
With the Utility CD Disk still in your CD ROM drive, open the File
Manager and then select the driver folder. (If in E:, type
E:\HS-2606 Driver\AC97)
53
2.
Press “Setup.exe” and to go setup.
3.
Once the Welcome screen appears on the screen, make sure to
close applications that are running and then click the Next button.
54
4.
The Select Components dialog box is now displayed. Select on
Install driver and then click on Next.
5.
After the audio driver installation finishes, select the Finish button
to complete the installation process.
55
5.3.2 Audio Driver Installation for WINNT
1.
With the Utility CD Disk still in your CD ROM drive, open the File
Manager and then select the driver folder. (If in E:, type
E:\HS-2606 Driver\AC97)
2.
Press “Setup.exe” and to go setup.
56
3.
Once the Welcome screen appears on the screen, make sure to
close applications that are running and then click the Next button.
4.
The Select Components dialog box is now displayed. Select on
VT8233/VT8235 and then click on Next.
57
5.
58
After the audio driver installation finishes, select restart computer
now, and click the Finish button to complete the installation
process.
5.4
USB2.0 Driver Installation
5.4.1 Win 98
1.
With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the main
menu.
2.
Select on Other Devices from the list of devices then double-click
on PCI Universal Serial Bus.
59
3.
The PCI Universal Serial Bus Properties screen then appears,
allowing you to re-install the driver. Select Driver from the main
menu to proceed.
4.
When the dialog box below appears, make sure you close all other
Windows applications then click on the Next > button to proceed.
60
5.
Tick on the “Search for a better driver” once the following screen
appears. Click on the Next to proceed.
6.
Once the program returns to the Add New Hardware Wizard
screen, your specified location will appear. Press on the Next
button to continue.
61
7.
When Setup finds the information it needs about the new driver, it
will display the device it found on the following screen. Press on
the Next button to accept and proceed.
8.
Once the InstallShield Wizard completes the operation and update
of your USB2.0 driver. Click on the Finish button to complete the
installation process.
62
5.4.2 Win 2000
1.
With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the main
menu.
2.
Select on Other Devices from the list of devices then double-click
on PCI Universal Serial Bus.
3.
The PCI Universal Serial Bus Properties screen then appears,
allowing you to re-install the driver. Select Driver from the main
menu to proceed.
63
4.
When the dialog box below appears, make sure you close all other
Windows applications then click on the Next > button to proceed.
5.
Tick on the “Search for a suitable driver” once the following screen
appears. Click on the Next to proceed.
64
6.
Once the program returns to the Add New Hardware Wizard
screen, your specified location will appear. Press on the Next
button to continue.
7.
Choose sisusb2.inf and press on the Open button to accept and
proceed.
65
8.
Once the InstallShield Wizard completes the operation and update
of your USB2.0 driver. Click on the Finish button to complete the
installation process.
5.4.3 Win XP
1.
66
With the Utility CD Disk still in your CD ROM drive, open the File
Manager and then select the driver folder. (If in E:, type
E:\HS-2606 Driver\USB2.0)
2.
Click on “Setup.exe” and to go setup.
3.
When the dialog box below appears, make sure you close all other
Windows applications then click on the Next > button to proceed.
67
4.
The programs starts to install the USB2.0 driver when you click
the Next> button on the screen below.
5.
Once the InstallShield Wizard completes the operation and update
of your USB2.0 driver. Click on the Yes button to restart computer
to complete the installation process.
68