These components are RoHS compliant BOLS002 5 x2mm LED STAND-OFF WITH BRIDGE Pb The BOLS002 is a single 5X2mm LED stand-off for mounting 14mm above the pcb. The housing has a bridge to clear resistors and is moulded in black Nylon 6 with zero flammability rating. • • • Very stable on the PCB. Range of colour. Component bridge MECHANICAL DATA 15.25 5.0 ANODE TO NOTCH 14.00 0.5 SQUARE 2.0 8.00 3.0 7.5 9.00 2.5 1.5 2.54 1.5 BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 13.6.03 ISS A BOLS002 ABSOLUTE MAXIMUM RATINGS (Ta = 25°C) PARAMETER RED GREEN Power Dissipation 60mW 75mW Forward Current 20mA 25mA Peak Forward Current* 60mA 60mA 3V 3V Reverse Voltage Operating Temperature -25 to +85°C Storage Temperature -30to +100°C Soldering Temperature These components are RoHS compliant Pb 260°C 5 seconds maximum * Pulse width 1ms Duty Cycle 20% ELECTRICAL & OPTICAL CHARACTERISTICS (Ta = 25°C) PARAMETER & CONDITIONS RED GREEN Forward Voltage [If=20mA] Typ = 2.0V Max = 3.0V Typ = 2.1V Max =3.0V Reverse Current [Vr = 3V] Max = 10μA Max = 10μA Peak Wavelength [If = 10mA] 650nm 563nm Luminous Intensity[If=10mA] Min = 0.36mcd Typ = 1 mcd Min = 0.36mcd Typ = 1mcd ORDERING INFORMATION BOLS002G=GREEN BOLS002R=RED BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 13.6.03 ISS A