BOTHHAND LU1S025

Bothhand USA. e-mail: [email protected] http://www.bothhandusa.com
“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS
P/N: LU1S025
Page : 1/2
A. General Specifications:
1. RJ-45 connector integrated with X’FMER / Impedance Resistor/High Voltage Capacitor
2. Size same as RJ-45 connector to save PCB board space.
3. Reduce EMI radiation, improve EMI performance.
4. Design for 100 Base transmission over UTP-5 CABLE.
5. Operating temp range:0 °C to +70 °C.
B. Electrical Specifications 25°C :
1. Turn Ratio(±5%): RX =1CT:1CT & TX=1CT:1.25CT
2. Primary OCL Inductance :350
H Min at 100 KHz /0.1Vrms with 8mA Bias
3. Cw/w : 28 pF Max
4. Leakage Inductance(1MHz): 0.4
H Max
5. Insertion Loss (0.3 to 100 MHz): –1.15 dB Max
6. Return Loss (dB Min): 5-30MHz
30-60MHz
-16
-12
60-80MHz
-10
7. Cross talk (dB Min): -35 @0.3-100 MHz
8. CMRR (dB Min) :37 @ (0.3-10MHz)
9. Rise Time : 2.5 ns Typ
10. HI-POT Isolation: 1500Vrms
C. Schematic :
462 Boston St - Topsfield, MA 01983 - Phone: 978-887-8050 - Fax: 978-887-5434
P
Bothhand USA. e-mail: [email protected] http://www.bothhandusa.com
“LAN-MATE” SERIES
SINGLE RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS
P/N: LU1S025
D. Mechanical:
Page : 2/2
1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing
2. Metal Shield
: Brass C2680-H, 20u Nickle Plated, t=0.25mm
3. Spring Wire
: 0.45mm Dia. Phosphor bronze with 6u gold plated .
4. Solder Pin
: 0.4x0.4mm ,Phosphor bronze with Solder plated
5. Durability
: 300 Mating cycles Min .
E. PCB Layout Mounting Hole (Top View)
462 Boston St - Topsfield, MA 01983 - Phone: 978-887-8050 - Fax: 978-887-5434