Bothhandusa.com "Lan-Mate" Series 1X4 RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU4S049 Page : 1/2 A. General Specifications 1.RJ-45 connector integrated with X’FMER /Impedance Resistor/High Voltage capacitor. 2. Size same as RJ-45 connector to save PCB board space. 3. Reduce EMI radiation, improve EMI performance. 4. Design for 100 BASE transmission over UTP-5 cable. 5. Operating temperature range: 0 °C to +70 °C. B. Electrical Specifications @25°C : 1. Turns Ratio: RX =1CT:1CT & TX=1CT:1CT 2. Primary OCL inductance: 350ìH Min at 100KHz/0.1V with 8mA DC Bias 3. Cw/w: 28pF Max 4. Leakage Inductance(TX&RX) : 0.4ìH MAX 5. Insertion Loss ( 0.3 TO 100MHz ): –1.15 dB MAX 6. Return Loss (dB MIN): 30MHz -16 40MHz 50MHz 60MHz 80MHz -13.5 -13 -10 -14 7. Cross talk (dB MIN): -35 ( Frequency: 0.3-80 MHz) 8. Differential to Common Mode Rejection(dB MIN): -30 ( Frequency 0.3-100MHz) 9. Rise Time (10-90%): 2.5nS.Typ 10. HI-POT Isolation: 1500Vrms C. Schematic: Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu Drawing no.: 462 Pulse Transformer REV.:A6 Date : 2001/08/06 Boston St - Topsfield, MA 01983 - Phone: 978-887-8050 - Fax: 978-887-5434 “LAN-MATE” SERIES 1X4 RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU4S049 Page : 2/2 D. Mechanical : ﹗ 1. Plastic Material : PBT 15% Glass Filled (UL 94V-0) , Black Housing 2. Metal Shield : Brass C2680-H, 20u Nickle Plated, t=0.25mm 3. Spring Wire : 0.45mm Dia. Phosphor bronze with 6u gold plated . 4. Solder Pin 5. Durability : 0.4x0.4mm ,Phosphor bronze with Solder plated : 300 Mating cycles Min . E. PCB Layout Mounting Hole (Top View) Prepared :Luo Ming Li Checked by: Xu Wenbing Approved : Alexander Wu 462 Boston St - Topsfield, MA 01983 - Phone: 978-887-8050 - Fax: 978-887-5434 Drawing no.: Pulse Transformer REV.:A6 Date : 2001/08/06