This component is RoHS compliant SSA 150 SERIES 3 TIER 3mm LED ASSEMBLY Pb The SSA 150 series is a family of display devices using a Black Nylon 6 UL-94VO rated housing to mount three 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1” . In any one batch the LEDs are lumenous intensity matched. • Accurate alignment of LEDs. • Low current and high brightness available. • Matched LEDs. • Bi-Colour and 2mA LEDs available. • Direct equivalent to Dialight 564-0X00-000 MECHANICAL DATA 11.43 2.6 Ø3.2 5.08 14.84 5.08 2.54 FEET 1.50 DIAM 3.5 4.45 0.4 2.54 2.54 + 0.5 SQ 2.54 4.32 BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE1 OF 2 ISS B 14.3.06 SSA 150 Series ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Red Green Yellow Orange Forward Current 15mA 30mA 20mA 30mA Power Dissipation 80mW 100mW 60mW 100mW Reverse Current @ 5V 10μA 10μA 10μA 10μA Operating Temperature -40°C to +85°C Storage Temperature -40°C to 100°C This component is RoHS compliant Pb 260°C Lead Soldering Temperature OPTO ELECTRONIC DATA (Ta = 25oC) Lumenous Intensity If = 10mA mcd Peak Wavelength nm Viewing Angle Degrees min typ 7.5 12.0 635 50 min typ 7.5 12.0 585 50 min typ max 9.0 15.0 565 - 50 - min typ 2.0 4.2 697 50 COLOUR ORANGE YELLOW GREEN RED Forward Voltage If = 10mA volts 2.8 ORDERING INFORMATION SSA150XYZ X = Top LED Indicate colour by using Y = Middle LED Z = Bottom LED R = Red R = HIGH EFFICIENCY RED B = Blank G = Green Y = Yellow LOW CURRENT VERSIONS ALSO AVAILABLE SEE SSA150L SERIES DATASHEET BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE 2 OF 2 ISS B 14.3.06