BRIGHT LED ELECTRONICS CORP. BL-B5141-TBS18C SINCE 1981 ● Features: ● Package dimensions: 1. Chip material: GaP/GaP 2. Emitted color : Bright Red 3.00(.118) 3. Lens Appearance : Red Diffused 4. Low power consumption. 5.30(.209) 0.81(.032) 5. High efficiency. 6. Versatile mounting on P.C. Board or panel. 1.5(.059) MAX. 7. Low current requirement. 8. 3mm diameter package 25.4(1.00) MIN. substance, compliance ROHS standard. CATHODE 9. This product don’t contained restriction 0.5(.02) SQ.TYP. 3.80(.150) 1.00(.039) MIN. Flat Denotes Cathode 2.54(.100) NOM. ● Applications: 1. TV set 2. Monitor Notes: 3. Telephone 1. All dimensions are in millimeters (inches). 4. Computer 2. Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. Circuit board ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Pd 40 mW Forward Current IF 15 mA Peak Forward Current*1 IFP 50 mA Reverse Voltage VR 5 V Operating Temperature Topr -40℃~80℃ Storage Temperature Tstg -40℃~85℃ Soldering Temperature Tsol 260℃(for 5 seconds) 1 * Condition for IFP is pulse of 1/10 duty and 0.1msec width. Ver.1.0 Page: 1 of 3 BRIGHT LED ELECTRONICS CORP. BL-B5141-TBS18C SINCE 1981 ● Electrical and optical characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF=20mA - 2.3 2.6 V Luminous Intensity Iv IF=20mA - 4.0 - mcd Reverse Current IR VR=5V - - 100 µA Peak Wave Length λp IF=20mA - 700 - nm Dominant Wave Length λd IF=20mA - 650 - nm Spectral Line Half-width ∆λ IF=20mA - 100 - nm Viewing Angle 2θ1/2 IF=20mA - 35 - deg ● Typical Electro-Optical Characteristics Curves Fig.2 Forward current derating curve vs. Ambient temperature Fig.1 Relative intensity vs. Wavelength 1.0 60 Forward current(mA) Relative radiant intensity 50 0.5 40 30 20 10 0 600 700 0 800 20 Wavelength λ (nm) Fig.3 Forward current vs. Forward voltage Relative luminous intensity Forward current(mA) 80 100 3.0 40 30 20 10 1 2 3 4 2.5 2.0 1.5 1.0 0.5 0 -40 5 Forward voltage(V) -20 0 40 20 60 Ambient temperature Ta(℃) Fig.5 Relative luminous intensity vs. Forward current Fig.6 Radiation diagram 0 2.0 10 20 30 Relative radiant intensity Relative luminous intensity(@20mA) 60 Fig.4 Relative luminous intensity vs. Ambient temperature 50 0 40 Ambient temperature Ta(℃) 1.5 1.0 0.5 1.0 40 0.9 50 0.8 60 70 0.7 80 90 0 10 20 30 40 50 0.5 0.3 0.1 0.2 0.4 0.6 Forward current (mA) Ver.1.0 Page: 2 of 3 BRIGHT LED ELECTRONICS CORP. BL-B5141-TBS18C SINCE 1981 ● Tapping and packaging specifications(Units: mm) 3.0(.118) 3.8(.150) H1--------------------18.0(.709)±0.5 L------------------------11.0(.433) Max. 5.3(.209) Cathode Wo--------------------------------9.0(.35) P1------------------------------5.0(.196) H1 F--------------------------------2.54(0.1) W2 P-------------------------------12.5(.49) L Wo W1 D----------------------------- 4.0(.157) W3 W1---------------------------10.0(.394) P1 F T D TxSxxx (2.54 PITCH STRAIGHT LEADS) P USER DIRECTION OF FEED W2----------------------4.0(.157) Max. W3---------------------------18.0(.708) T-----------------------1.42(.055) Max. Notes: 1.All dimensions are in millimeter (inch). 2.Tolerance is ±0.25mm (0.01”) unless otherwise specified. 3.Lead spacing is measured where the leads emerge from the package. 4.The stopper is used as the tie bar. ● Bin Limits 1. Intensity Bin Limits (At IF= 20mA) Bin Code Min. (mcd) Max. (mcd) : : : E 1.4 2.8 F 2.1 4.2 G 3.2 6.3 H 4.8 9.4 J 7.0 14.0 : : : ● Bin： x Intensity bin code Ver.1.0 Page: 3 of 3