BRIGHT LED ELECTRONICS CORP. BS-CF0FRD SINCE 1981 ● ● Features : 1. 3.0 inch (76.0mm) Digit Height. 2. Continuous uniform segments. 3. Low power requirement. 4. Excellent characters appearance. 5. Solid state reliability. 6. Categorized for luminous intensity. 7. ● 1. Package Dimensions : 46.00(1.811) 10 76.00(2.992) 109.80(4.323) 69.80(2.748) Direct drive common cathode. 80.50(3.169) 6.0(.236) 13.00(.512) Description : 3.00(.118)MIN. 0.80(.031) The BS-CF0FRD is a 76.0mm (3.0") high 5.08(.200) single digit seven segments display. 2. This product use super red chips, which are made from GaAlAs on GaAs substrate 3. This product have a black face and white segments. 4. ● Notes: 1. All dimensions are in millimeters(inches). 2. Tolerance is ±0.25mm(.01")unless otherwise specified. 3. Specifications are subject to change without notice. This product doesn't contain restriction substance, comply ROHS standard. Internal Circuit Diagram : 8 A 佰鴻工業股份有限公司 http://www.brtled.com F B G E C D + PIN 1. DP1 DP2 A 7 B 6 C D 5 2 E F 1 10 G DP1 DP2 9 4 3 Ver.1.0 Page 1 of 3 BRIGHT LED ELECTRONICS CORP. BS-CF0FRD SINCE 1981 ● Absolute Maximum Ratings(Ta=25℃) Parameter Symbol Rating Unit Power Dissipation Per Segment Pd 460 mW Forward Current Per Segment IF 30 mA IFP (Duty 1/10, 1KHZ) 50 mA VR 5 V Operating Temperature Topr -40℃~80℃ - Storage Temperature Tstg -40℃~85℃ - Soldering Temperature (1/16" From Body) Tsol 260℃ For 5 Seconds - Peak Forward Current Per Segment Reverse Voltage Per Segment ● Electrical And Optical Characteristics(Ta=25℃) Parameter Symbol Condition Min. Typ. Max. Unit Forward Voltage Per Segment Vf IF=10mA - 12.0 15.0 V Luminous Intensity Per Segment Iv IF=10mA - 25.0 - mcd Reverse Current Per Segment IR VR=5V - - 100 µA Peak Wave Length λp IF=10mA - 660 - nm Dominant Wave Length λd IF=10mA 638 - 648 nm Spectral Line Half-width ∆λ IF=10mA - 20 - nm 佰鴻工業股份有限公司 http://www.brtled.com Ver.1.0 Page 2 of 3 BRIGHT LED ELECTRONICS CORP. BS-CF0FRD SINCE 1981 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Fig.1 Relative Radiant Intensity VS. Wavelength Relative Radiant Intensity 1.0 0.5 0 570 600 630 Fig.2 Forward Current VS. Forward Voltage 40 30 20 10 0 660 Wavelength(nm) Relative Luminous Intensity (@20mA) Forward Current (mA) 50 1 2 3 4 5 2.0 690 3.0 720 750 Fig.3 Relative Luminous Intensity VS. Ambient Temperature 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 Ambient Temperature Ta( C) Forward Voltage (V) Fig.4 Relative Luminous Intensity VS. Forward Current 50 Fig.5 Forward Current Derating Curve VS. Ambient Temperature 佰鴻工業股份有限公司 http://www.brtled.com Forward Current(mA) Relative Luminous Intensity (@20mA) ● 1.5 1.0 0.5 0 10 20 30 40 Forward Current(mA) 50 40 30 20 10 0 20 40 60 80 100 120 Ambient Temperature Ta( C) Ver.1.0 Page 3 of 3